过氧化氢催化氧化难降解废水的研究

文章以过氧化氢为氧化剂,以γ-Al2O3为载体采用浸渍法制得不同金属含量的九种催化剂进行催化氧化实验,并优选出以5.0%Co、2.5?(质量百分含量)催化剂CODcr去除率较好,并确定此催化剂在常温常压下,反应时间为30 min,pH=6,氧化剂用量为30g/L时,CODcr的去除率最高为83%,这样不仅提高了BOD5/CODcr值,而且有利于后续生化处理,减轻后续处理装置负荷.     

Effectiveness evaluation of water-sprinkling in controlling urban fugitive road dust based on TRAKER method: A case study in Baoding, China

Fugitive road dust (FRD) contributes a great deal to urban rainwater and air pollution and is commonly controlled by water-sprinkling in most Chinese cities. However, there is a lack of information on its effectiveness. We used the Testing Re-entrained Aerosol Kinetic Emissions from Roads (TRAKER) method to monitor different types of roads in Baoding city before and within 1 hr after water-sprinkling and obtained the road dirtiness index (a) and PM concentration in the road environment ($T_{\mathrm{T}}^{*}$), to evaluate the removal efficiency for PM deposited on the road surface (${\eta }_a$) and the reduction efficiency for the PM concentration in the road environment (${\eta }_{\text{PM}}$). The results give that the ${\eta }_a$ for three types of roads is ranked: branch road (87%-–100%) > major arterial road (80%-83%) > minor arterial road (68%-77%), and the ${\eta }_{\text{PM}}$ ranked: minor arterial road (70%) > branch road (46%-58%) > major arterial road (37%-53%). The ${\eta }_a$ and ${\eta }_{\text{PM}}$ varied non-linearly with time and presented a quadratic curve. The average effective control time (${\eta }_{\mathit{a}}$> 0) was 62 min on the major and minor arterial roads, and much longer than 1 hr on branch roads. The ${\eta }_{\text{PM}}$ values diminished completely by 72 min on average from the end of sprinkling for the three types of roads. Water-sprinkling can remove PM₁₀ particles from the road surface and reduce their concentration in the road environment more thoroughly than PM_2.5. Our findings could be helpful for controlling urban FRD emissions more efficiently and precisely.     

研究单位压边力值对板料成形性能的影响

主要介绍板料在拉深成形过程中单位压边力值对板料成形性能的影响。研究方法采用仿真技术 ,指出板料在成形过程中如按最初设定的单位压边力值进行成形 ,那么 ,板料成形过程中单位压边力值将逐渐增大 ,严重影响板料成形极限。如果采用控制板料在成形过程中压边圈下坯料的单位压边力值 ,将提高板料成形极限。其结论为生产现场提高板料成形性能和表面质量提供了一种可实施的方法。     

水中酚类有机污染物HPLC分析及其应用

超声辐照技术降解水中有机污染物，其降解效率的主平价需要简单、快捷和精确的分析方法。为此研究了5种优先控制酚类污染物的HPLC分离及定量分析方法，方法的定量范围为0.4-100mg/L，检测限介于0.34-0.79ng/μL。4－氯酚的超声降解实验表明，随着反应溶液中4－氯酚初始浓度的降低，降解效率明显提高，因此该方法适用于超声降解过程中酚类污染物的跟踪测定。     

环境工程设计质量保障体系探讨

以污水处理工程为例，阐明环境工程设计质量保障体系的构成，概述设计原则以及每一设计步骤所需注意的问题，对验证、确保设计质量的后续工作过程作了简要的介绍。     

我国SO_2和NO_X排放强度地理分布和历史趋势

根据我国燃料消费、燃料的含硫量和硫与氮氧化物排放因子，计算我国各地区ＳＯ_２和ＮＯ_Ｘ排放强度地理分布。结果指出，我国原煤含硫量为１．１２％。１９９０年全国ＳＯ_２和ＮＯ_Ｘ的排放量分别为１７５１．８万ｔ和８４２．２万ｔ，排放强度最大的地区是中东部地区，即辽宁、河北、山东、山西和浙江。这些地区平均排放强度大于７ｔ／ｋｍ￣２·ａ。还估算了全国１９５０～１９９０年ＳＯ_２和ＮＯ_Ｘ历年的排放量。     

Characteristics of phosphorus chemistry and its geographical distribution in the Haihe River valley,North China

ＣｈａｒａｃｔｅｒｉｓｔｉｃｓｏｆｐｈｏｓｐｈｏｒｕｓｃｈｅｍｉｓｔｒｙａｎｄｉｔｓｇｅｏｇｒａｐｈｉｃａｌｄｉｓｔｒｉｂｕｔｉｏｎｉｎｔｈｅＨａｉｈｅＲｉｖｅｒｖａｌｌｅｙ，ＮｏｒｔｈＣｈｉｎａＪｉａｎｇＧａｏｍｉｎｇ；ＨｕａｎｇＹｉｎｘｉａｏ；Ｌ...     

Yellow River Valley flood and drought disaster:spatial-temporal distribution predictionand early-warning

ＹｅｌｌｏｗＲｉｖｅｒＶａｌｌｅｙｆｌｏｏｄａｎｄｄｒｏｕｇｈｔｄｉｓａｓｔｅｒ：ｓｐａｔｉａｌ－ｔｅｍｐｏｒａｌｄｉｓｔｒｉｂｕｔｉｏｎｐｒｅｄｉｃｔｉｏｎａｎｄｅａｒｌｙ－ｗａｒｎｉｎｇＧａｏＬｉｎ，ＳｈａＷａｎｙｉｎｇ，ＬｉｕＨｕａｉｑｕａｎ，...     

离子强度、pH值和Ca2+/Al3+对马尾松幼苗的铝毒影响

测定了在不同溶液酸度、不同离子强度和Ca~(2+)/Al~(3+)比下,铝对马尾松幼苗生长状况的影响。结果表明,溶液酸度增加,离子强度减小时,铝的毒害作用增大。钙对铝毒有明显缓解作用,当Ca~(2+)/Al~(3+)增大时,铝的毒性减小,但其缓解作用与铝浓度有关,当铝浓度增加,钙的缓解能力下降。     

中国米质气候资源的地域分布

稻米品质受着气候条件的明显影响。在我国不同地域，米质气候资源各不相同，对米质的影响也各具特色，总的趋势是，北方优于南方；西部优于东部；晚茬口水稻优于旱茬口；在地形复杂地区，米质气候资源还具有垂直地带性结构。我国丰富的米质气候资源为各种类型优质米的生产创造出优越的环境条件。