Pyrolysis behaviors of oil sludge based on TG/FTIR and PY-GC/MS

Pyrolysis is an alternative technology for oil sludge treatment. Thermogravimetric Analysis-Fourier Transform Infrared Spectroscopy and Pyrolysis-Gas Chromatography/Mass Spectrometry were employed to investigate the pyrolysis process and products of oil sludge. The pyrolysis process was divided into five stages: drying and gas desorption, oil volatilization, main pyrolysis, semi-coke charring, and mineral decomposition. The main reaction temperatures ranged from 497.6 K to 753.2 K. The products were mainly composed of pairs of alkane and alkene (carbon number ranges from 1 to 27). The mechanisms consisted of random chain scission followed by end chain scission at high temperatures with volatilization occurring during the whole process. This study is useful not only for the proper design of a pyrolysis system, but also for improving the utilization of liquid oil products.     

绿色环境保护节能建筑的设计与实现研究

为了实现建筑行业的可持续发展,设计并实现绿色环保节能建筑,将节能环保理念渗透在建筑设计的每个细节中。分析融入节能环保理念的建筑设计过程,对其中的架构环保节能设计、节能环保材料的选用以及节能环保技术发展进行研究,并重点分析了资源可持续利用、太阳能利用以及电气节能技术在绿色环保节能建筑设计中的应用过程。通过绿色建筑节能环保总设计,绿色节能环保建筑构造的优化设计以及绿色建筑的暖通空调设计,实现绿色环保节能建筑的高质量设计。     

株洲清水塘工业区周边土壤微生物群落特征

基于Illumina高通量测序技术分析了株洲清水塘工业区周边土壤的微生物群落特征,研究重金属污染对土壤微生物群落的影响.结果表明,土壤微生物群落的相对丰度和多样性变化趋势一致,均随着重金属污染程度增加而减小;稻田土壤平均相对丰度最高的门是变形菌门(49. 56%),其次为绿弯菌门(13. 07%)和酸杆菌门(8. 77%);较高重金属污染程度下伴随着更高丰度的变形菌门、绿弯菌门与更低丰度的硝化螺旋菌门、酸杆菌门; 4组样品的微生物群落结构相似性较高,OTU重叠度达52. 64%,丰度较高的OTU其微生物群落更趋向于相似;结合Spearman相关性分析,Cr与变形菌门显著负相关,与绿弯菌门显著正相关,Cd、Cu、Pb和Zn与硝化螺旋菌门显著负相关.以上结果表明,重金属污染是影响清水塘工业区周边土壤微生物群落结构的重要因素.     

油品荧光特性的Logistic回归分析鉴别海上溢油的研究

用恒波长同步荧光法检测了280±2 nm、300±2 nm、332±2 nm 3个特征波长下的22种原油和12种燃料油的荧光强度,并以此作为变量,建立了快速定量鉴别海上溢油的原油和燃料油的Logistic回归模型。Hosmer-Lemeshow拟合优度检测值2.43小于15.51、其对应P值0.97大于0.05,说明建模数据的信息被充分提取和利用。风化前后油样的受试者工作特征曲线（ROC曲线）分析显示该鉴别方法准确性较高,曲线下边面积（AUC）大于0.9,灵敏度和特异性大于0.85。用15种非建模油样对所建立的模型进行验证,计算结果与实际情况吻合度较高,鉴别正确率达93%。此外,该模型也适用于油种风化后的鉴别。     

Computational investigation of the effects of knee airbag design on the interaction with occupant lower extremity in frontal and oblique impacts

Objective: The lower extremity of the occupant represents the most frequently injured body region in motor vehicle crashes. Knee airbags (KABs) have been implemented as a potential countermeasure to reduce lower extremity injuries. Despite the increasing prevalence of KABs in vehicles, the biomechanical interaction of the human lower extremity with the KAB has not been well characterized. This study uses computational models of the human body and KABs to explore how KAB design may influence the impact response of the occupant's lower extremities.

Methods: The analysis was conducted using a 50th percentile male occupant human body model with deployed KABs in a simplified vehicle interior. The 2 common KAB design types, bottom-deploy KAB (BKAB) and rear-deploy KAB (RKAB), were both included. A state-of-the-art airbag modeling technique, the corpuscular particle method, was adopted to represent the deployment dynamics of the unfolding airbags. Validation of the environment model was performed based on previously reported test results. The kinematic responses of the occupant lower extremities were compared under both KAB designs, 2 seating configurations (in-position and out-of-position), and 3 loading conditions (static, frontal, and oblique impacts). A linear statistical model was used to assess factor significance considering the impact responses of the occupant lower extremities.

Results: The presence of a KAB had a significant influence on the lower extremity kinematics compared to no KAB (P <.05) by providing early restraint and distributing contact force on the legs during airbag deployment. For in-position occupants, the KAB generally tended to decrease tibia loadings. The RKAB led to greater lateral motion of the legs compared to the BKAB, resulting in higher lateral displacement at the knee joint and abduction angle change (51.2 ± 21.7 mm and 15° ± 6.0°) over the dynamic loading conditions. Change in the seating position led to a significant difference in occupant kinematic and kinetic parameters (P <.05). For the out-of-position (forward-seated) occupant, the earlier contact between the lower extremity and the deploying KAB resulted in 28.4° ± 5.8° greater abduction, regardless of crash scenarios. Both KAB types reduced the axial force in the femur relative to no KAB. Overall, the out-of-position occupant sustained a raised axial force and bending moment of the tibia by 0.8 ± 0.2 kN and 21.1 ± 8.7 Nm regardless of restraint use.

Conclusions: The current study provided a preliminary computational examination on KAB designs based on a limited set of configurations in an idealized vehicle interior. Results suggested that the BKAB tended to provide more coverage and less leg abduction compared to the RKAB in oblique impact and/or the selected out-of-position scenario. An out-of-position occupant was associated with larger abduction and lower extremity loads over all occupant configurations. Further investigations are recommended to obtain a full understanding of the KAB performance in a more realistic vehicle environment.     

微囊藻毒素对不同生育期水稻生长的影响

灌溉水中的微囊藻毒素不仅会影响作物生长与产量,还可能沿食物链传递而威胁人类健康。以水稻为试材,研究了不同质量浓度(1μg/L、100μg/L、1 000μg/L、3 000μg/L)微囊藻毒素(MCs)对幼苗期和孕穗期水稻生长与成熟期水稻产量的影响,以及MCs在3个生育期水稻中的积累。结果表明:处理7 d后,1μg/L MCs处理对幼苗期水稻生长有一定促进作用,而对孕穗期水稻生长没有影响,高质量浓度MCs(≥100μg/L)抑制幼苗期和孕穗期水稻的生长;胁迫结束且恢复7 d后,100μg/L处理组孕穗期水稻根长、根表面积恢复能力强于幼苗期,株高、叶面积低于幼苗期,而1 000μg/L和3 000μg/L MCs组水稻各指标不仅未恢复,且劣于胁迫期,水稻产量下降92.4%和95.2%。用酶联免疫法检测发现,胁迫后MCs均在水稻体内富集。对于相同质量浓度MCs处理,幼苗期水稻各器官富集能力最大,孕穗期次之,成熟期最小。3 000μg/L MCs处理组的水稻谷粒中MCs质量比达21.2μg/kg,使人体每天摄入MCs的量可能高于世界卫生组织规定的人体每天吸收MCs的上限值。     

A comprehensive classification method for VOC emission sources to tackle air pollution based on VOC species reactivity and emission amounts

In China, volatile organic compound(VOC) control directives have been continuously released and implemented for important sources and regions to tackle air pollution. The corresponding control requirements were based on VOC emission amounts(EA), but never considered the significant differentiation of VOC species in terms of atmospheric chemical reactivity. This will adversely influence the effect of VOC reduction on air quality improvement. Therefore,this study attempted to develop a comprehensive classification method for typical VOC sources in the Beijing–Tianjin–Hebei region(BTH), by combining the VOC emission amounts with the chemical reactivities of VOC species. Firstly, we obtained the VOC chemical profiles by measuring 5 key sources in the BTH region and referencing another 10 key sources, and estimated the ozone formation potential(OFP) per ton VOC emission for these sources by using the maximum incremental reactivity(MIR) index as the characteristic of source reactivity(SR). Then, we applied the data normalization method to respectively convert EA and SR to normalized EA(NEA) and normalized SR(NSR) for various sources in the BTH region.Finally, the control index(CI) was calculated, and these sources were further classified into four grades based on the normalized CI(NCI). The study results showed that in the BTH region,furniture coating, automobile coating, and road vehicles are characterized by high NCI and need to be given more attention; however, the petro-chemical industry, which was designated as an important control source by air quality managers, has a lower NCI.     

关于建立生态建设示范区生态环境质量综合评价体系的初步思考

文章介绍了我国生态示范区的建设情况以及生态环境质量评价的概念、方法及应用,指出了现有生态示范区生态环境质量评价体系的不足,立足于土壤、水、气、生物等系统环境,提出了江苏省生态建设示范区生态环境质量综合评价指标体系的初步框架.     

特低渗透油层含油污水处理工艺新技术

针对大庆油田低渗透油层水处理工艺存在的问题,设计了金刚砂过滤工艺。进行过滤效果及现场应用稳定性试验,通过工艺的调整及参数的优化,使其出水指标稳定,确定其最佳滤速、反洗再生、级配等运行工艺参数。并对其技术、经济性评价分析,确定为适合油田的精细过滤技术。     

企业污染岂能仅用罚款解决--河北敬业集团污染调查报告

近日,本刊多次接到河北省平山县南甸镇村民的投诉。投诉称, 多年来河北敬业集团的平山钢铁厂及化工厂制造的烟尘、污水、废气和噪声污染严重干扰了他们的正常生活,令他们已经无法忍受。 2005年11月末至12月初期间,本刊记者前往河北省平山县南甸镇进行了暗访。