Evaluation of the RAMS continuous monitor for determination of PM2.5 mass including semi-volatile material in Philadelphia,PA

The real-time ambient mass sampler (RAMS) is a continuous monitor based on particle concentrator, denuder, drier, and tapered element oscillating microbalance (TEOM) monitor technology. It is designed to measure PM2.5 mass, including the semi-volatile species NH4NO3 and semi-volatile organic material, but not to measure PM2.5 water content. The performance of the RAMS in an urban environment with high humidity was evaluated during the July 1999 NARSTO-Northeast Oxidant and Particles Study (NEOPS) intensive study at the Baxter water treatment plant in Philadelphia, PA. The results obtained with the RAMS were compared to mass measurements made with a TEOM monitor and to constructed mass obtained with a Particle Concentrator-Brigham Young University Organic Sampling System (PC-BOSS) sampler designed to determine the chemical composition of fine particles, including the semi-volatile species. An average of 28% of the fine particulate material present during the study was semi-volatile organic material lost from a filter during particle collection, and 1% was NH4NO3 that was also lost from the particles during sampling. The remaining mass was dominantly nonvolatile (NH4)2SO4 (31%) and organic material (37%), with minor amounts of soot, crustal material, and nonvolatile NH4NO3. Comparison of the RAMS and PC-BOSS results indicated that the RAMS correctly monitored for fine particulate mass, including the semivolatile material. In contrast, the heated filter of the TEOM monitor did not measure the semi-volatile material. The comparison of the RAMS and PC-BOSS data had a precision of +/-4.1 microg/m3 (+/-9.6%). The precision of the RAMS data was limited by the uncertainty in the blank correction for the reversible adsorption of water by the charcoal-impregnated cellulose sorbent filter of the RAMS monitor. The precision of the measurement of fine particulate components by the PC-BOSS was +/-6-8%.     

A new environmental chamber for evaluation of gas-phase chemical mechanisms and secondary aerosol formation

A new state-of-the-art indoor environmental chamber facility for the study of atmospheric processes leading to the formation of ozone and secondary organic aerosol (SOA) has been constructed and characterized. The chamber is designed for atmospheric chemical mechanism evaluation at low reactant concentrations under well-controlled environmental conditions. It consists of two collapsible 90 m³ FEP Teflon film reactors on pressure-controlled moveable frameworks inside a temperature-controlled enclosure flushed with purified air. Solar radiation is simulated with either a 200 kW Argon arc lamp or multiple blacklamps. Results of initial characterization experiments, all carried out at 300–305 K under dry conditions, concerning NO_x and formaldehyde offgasing, radical sources, particle loss rates, and background PM formation are described. Results of initial single organic–NO_x and simplified ambient surrogate–NO_x experiments to demonstrate the utility of the facility for mechanism evaluation under low NO_x conditions are summarized and compared with the predictions of the SAPRC-99 chemical mechanism. Overall, the results of the initial characterization and evaluation indicate that this new environmental chamber can provide high quality mechanism evaluation data for experiments with NO_x levels as low as 2 ppb, though the results indicate some problems with the gas-phase mechanism that need further study. Initial evaluation experiments for SOA formation, also carried out under dry conditions, indicate that the chamber can provide high quality secondary aerosol formation data at relatively low hydrocarbon concentrations.     

Ozone and bean plants: morphology matters

Relationship between leaf morphology and cultivar sensitivity to ozone were established.     

Designing monitoring networks to represent outdoor human exposure

Measurements of outdoor human exposure to suspended particulate matter (PM) are always constrained by available resources. An effective network design requires tradeoffs between variables measured, the number of sampling locations, sample duration, and sampling frequency. Sampling sites are needed to represent neighborhood and urban spatial scales with minimal influences from nearby sources. Although most PM measurements for determining compliance with standards are taken over 24-h periods every third to sixth day, outdoor human exposure assessment requires measurements taken continuously throughout the day, preferably over durations of 1 h or less. More detailed particle size and chemistry data are also desirable, as smaller size fractions and specific chemicals may be better indicators of adverse health effects than total mass samples.     

Kenneth Mellanby Review Award. The Mellanby Review Award for 2002

The Mellanby Review Award is named after Kenneth Mellanby, the founding editor of Environmental Pollution. The award is made on a biennial basis to a distinguished scientist in one of the many areas that make up the broad field of environmental pollution. The recipient is asked to write a critical review paper that will be published in the journal and will also receive a US $1500 bursary and travel funds to attend a meeting where the paper will be presented in a public lecture and an award certificate presented.     

Using forest health monitoring data to integrate above and below ground carbon information

The national Forest Health Monitoring (FHM) program conducted a remeasurement study in 1999 to evaluate the usefulness and feasibility of collecting data needed for investigating carbon budgets in forests. This study indicated that FHM data are adequate for detecting a 20% change over 10 years (2% change per year) in percent total carbon and carbon content (MgC/ha) when sampling by horizon, with greater than 80% probability that a change in carbon content will be determined when a change has truly occurred (P < or = 0.33). The data were also useful in producing estimates of forest floor and soil carbon stocks by depth that were somewhat lower than literature values used for comparison. The scale at which the data were collected lends itself to producing standing stock estimates needed for carbon budget development and carbon cycle modeling. The availability of site-specific forest mensuration data enables the exploration of above ground and below ground linkages.     

Preparing to measure the effects of the NOx SIP call--methods for ambient air monitoring of NO,NO2, NOy,and individual NOz species

The capping of stationary source emissions of NOx in 22 states and the District of Columbia is federally mandated by the NOx SIP Call legislation with the intended purpose of reducing downwind O3 concentrations. Monitors for NO, NO2, and the reactive oxides of nitrogen into which these two compounds are converted will record data to evaluate air quality model (AQM) predictions. Guidelines for testing these models indicate the need for semicontinuous measurements as close to real time as possible but no less frequently than once per hour. The measurement uncertainty required for AQM testing must be less than +/-20% (+/-10% for NO2) at mixing ratios of 1 ppbv and higher for NO, individual NOz component compounds, and NOy. This article is a review and discussion of different monitoring methods, some currently used in research and others used for routine monitoring. The performance of these methods is compared with the monitoring guidelines. Recommendations for advancing speciated and total NOy monitoring technology and a listing of demonstrated monitoring approaches are also presented.     

The effects of sludge burning on the PCDD/PCDF content of ashes from pulp and paper mill hog fuel boilers

The results of a study designed to quantify the levels of PCDD/Fs in boiler and control device ashes resulting from burning sludge of bleached mill origin, admixed with bark, are summarized.     

Determination of wavelength-averaged,near UV quantum yields for environmental chemicals

The present study describes a procedure for determination of an average quantum yield for the wavelength range of 310 to 410 nm. Solutions of the pollutant in sealed Pyrex tubes are irradiated in a Rayonet photoreactor fitted with fluorescent lamps emitting maximally at 355 nm. The integrated spectral overlap and the photolysis half-life for both the chemical actinometer and the pollutant are determined and from these data the quantum yield is calculated. The method has been evaluated by measuring quantum yields for organophosphorus, chlorinated hydrocarbon, and dinitroaniline pesticides and $\text{p}$-nitroanisole/pyridine mixtures. Corrected quantum yields are obtained on simultaneous irradiation of the trifluralin actinometer.     

Which visibility indicators best represent a population’s preference for a level of visual air quality?

Several studies have been carried out over the past 20 or so years to assess the level of visual air quality that is judged to be acceptable in urban settings. Groups of individuals were shown slides or computer-projected scenes under a variety of haze conditions and asked to judge whether each image represented acceptable visual air quality. The goal was to assess the level of haziness found to be acceptable for purposes of setting an urban visibility regulatory standard. More recently, similar studies were carried out in Beijing, China, and the more pristine Grand Canyon National Park and Great Gulf Wilderness. The studies clearly showed that when preference ratings were compared to measures of atmospheric haze such as atmospheric extinction, visual range, or deciview (dv), there was not a single indicator that represented acceptable levels of visual air quality for the varied urban or more remote settings. For instance, using a Washington, D.C., setting, 50% of the observers rated the landscape feature as not having acceptable visual air quality at an extinction of 0.19 km^?1 (21 km visual range, 29 dv), while the 50% acceptability point for a Denver, Colorado, setting was 0.075 km^?1 (52 km visual range, 20 dv) and for the Grand Canyon it was 0.023 km^?1 (170 km visual range, 7 dv). Over the past three or four decades, many scene-specific visibility indices have been put forth as potential indicators of visibility levels as perceived by human observers. They include, but are not limited to, color and achromatic contrast of single landscape features, average and equivalent contrast of the entire image, edge detection algorithms such as the Sobel index, and just-noticeable difference or change indexes. This paper explores various scene-specific visual air quality indices and examines their applicability for use in quantifying visibility preference levels and judgments of visual air quality.

Implications: Visibility acceptability studies clearly show that visibility become more unacceptable as haze increases. However, there are large variations in the preference levels for different scenes when universal haze indicators, such as atmospheric extinction, are used. This variability is significantly reduced when the sky–landscape contrast of the more distant landscape features in the observed scene is used. Analysis suggest that about 50% of individuals would find the visibility unacceptable if at any time the more distant landscape features nearly disappear, that is, they are at the visual range. This common metric could form the basis for setting an urban visibility standard.