Assessing the effects of transboundary ozone pollution between Ontario,Canada and New York,USA

We investigated the effects of transboundary pollution between Ontario and New York using both observations and modeling results. Analysis of the spatial scales associated with ozone pollution revealed the regional and international character of this pollutant. A back-trajectory-clustering methodology was used to evaluate the potential for transboundary pollution trading and to identify potential pollution source regions for two sites: CN tower in Toronto and the World Trade Center in New York City. Transboundary pollution transport was evident at both locations. The major pollution source areas for the period examined were the Ohio River Valley and Midwest. Finally, we examined the transboundary impact of emission reductions through photochemical models. We found that emissions from both New York and Ontario were transported across the border and that reductions in predicted O3 levels can be substantial when emissions on both sides of the border are reduced.     

Investigation of irradiated soil byproducts

The high dose irradiation of windblown soil deposited onto the surface of spent nuclear fuel is of concern to long-term fuel storage stability. Such soils could be exposed to radiation fields as great as 1.08 x 10(-3) C/kg-s (15,000 R/hr) during the 40-year anticipated period of interim dry storage prior to placement at the proposed national repository. The total absorbed dose in these cases could be as high as 5 x 10(7) Gy (5 x 10(9) rads). This investigation evaluated the potential generation of explosive or combustible irradiation byproducts during this irradiation. It focuses on the production of radiolytic byproducts generated within the pore water of surrogate clays that are consistent with those found on the Idaho National Engineering and Environmental Laboratory. Synthesized surrogates of localized soils containing combinations of clay, water, and aluminum samples, enclosed within a stainless steel vessel were irradiated and the quantities of the byproducts generated measured. Two types of clays, varying primarily in the presence of iron oxide, were investigated. Two treatment levels of irradiation and a control were investigated. An 18-Mev linear accelerator was used to irradiate samples. The first irradiation level provided an absorbed dose of 3.9 x 10(5)+/-1.4 x 10(5)Gy (3.9 x 10(7)+/-1.4 x 10(7) rads) in a 3-h period. At the second irradiation level, 4.8 x 10(5)+/-2.0 x 10(5)Gy (4.8 x 10(7)+/-2.0 x 10(7) rads) were delivered in a 6-h period. When averaged over all treatment parameters, irradiated clay samples with and without iron (III) oxide (moisture content = 40%) had a production rate of hydrogen gas that was a strong function of radiation-dose. A g-value of 5.61 x 10(-9)+/-1.56 x 10(-9) mol/J (0.054+/-0.015 molecules/100-eV) per mass of pore water was observed in the clay samples without iron (III) oxide for hydrogen gas production. A g-value of 1.07 x 10(-8)+/-2.91 x 10(-9) mol/J (0.103+0.028 molecules/100-eV) per mass of pore water was observed in the iron (III) oxide containing clay samples for hydrogen gas production. This value was noticeably larger when the samples were spiked with both KCl and KNO3 salts. The ratio of oxygen to nitrogen gas was observed to increase as a function of absorbed dose particularly in the presence of both KCl and KNO3 salts. The creation of radiolytic byproducts produced an observable but small increase in headspace pressure. Temperature increases during irradiation were not observed. Additionally, KCl and KNO3 salts added to the clays enhanced nitrite production as a function of radiation-dose and the type of clay considered. The addition of aluminum to these samples had no statistically discernable impact at the alpha = 0.05 level. Generation of the irradiation products, hydrogen peroxide and hydrogen gas also depended upon the type of clay irradiated and the presence of both KCl and KNO3 salts and the total dose received.     

Biosorption of copper from aqueous solutions utilizing agricultural wastes

The purpose of this study was to determine the copper (Cu) biosorption capacities of several agricultural wastes from aqueous solutions. Samples of agricultural wastes were tested unaltered and after hydrochloric acid (HCl) treatment. Additional parameters tested include sample dose, contact time, particle size, mixing temperature, and the concentrations and pH of the Cu solutions. Desorption studies were performed to determine if the removed Cu could be recovered. In addition, tests were conducted to determine if the agricultural waste samples (AWS) could be reused for additional Cu biosorption cycles. The results of this study demonstrate a wide range of Cu biosorption proficiencies ranging from 0% to 100% removal. The parameters that resulted in higher Cu removal include higher pH and lower Cu solution concentration. Desorption results showed a 58% to 86% Cu recovery rate. Three of the five reused AWS were effective at removing Cu during subsequent trials. Therefore, these AWS types can be reused for additional Cu biosorption cycles. Hence, it is possible that using those AWS for metal treatment could reduce hazardous waste disposal inefficiencies and costs by avoiding disposing of spent AWS following each Cu biosorption cycle.     

可持续发展与零售部门的社会重要性

去年秋天世界可持续发展峰会(WSSD)倡议,要全面认识可持续发展的社会支柱作用,包括消除贫困、争取权利和公平,以及有收入的就业等问题.自从1992年地球峰会以来,这些已经成为国际自由工会联合会(ICFTU)、经济合作与发展组织的工会咨询委员会(TUAC)和全球工会联合会(GUF)优先解决的问题.     

A combined model–observation approach to estimate historic gridded fields of PM2.5 mass and species concentrations

This paper introduces a methodology for estimating gridded fields of total and speciated fine particulate matter (PM_2.5) concentrations for time periods and regions not covered by observational data. The methodology is based on performing long-term regional scale meteorological and air quality simulations and then integrating these simulations with available observational data. To illustrate this methodology, we present an application in which year-round simulations with a meteorological model (the National Center for Atmospheric Research/Penn State Mesoscale Model, hereafter referred to as MM5) and a photochemical air quality model (the Community Multiscale Air Quality Model, hereafter referred to as CMAQ) have been performed over the northeastern United States for 1988–2005. Model evaluation results for total PM_2.5 mass and individual species for the time period from 2000 to 2005 show that model performance varies by species, season, and location. Therefore, an approach is developed to adjust CMAQ output with factors based on these three variables. The adjusted model values for total PM_2.5 mass for 2000–2005 are compared against independent measurements not utilized for the adjustment approach. This comparison reveals that the adjusted model values have a lower root mean square error (RMSE) and higher correlation coefficients than the original model values. Furthermore, the PM_2.5 estimates from these adjusted model values are compared against an alternate method for estimating historic PM_2.5 values that is based on PM_2.5/PM₁₀ ratios calculated at co-located monitors. Results reveal that both methods yield estimates of historic PM_2.5 mass that are broadly consistent; however, the adjusted CMAQ values provide greater spatial coverage and information for PM_2.5 species in addition to total PM_2.5 mass. Finally, strengths and limitations of the proposed approach are discussed in the context of potential uses of this method.     

Condition-dependent response to changes in pollen stores by honey bee (Apis mellifera) colonies with different parasitic loads

The impact of a parasitic infestation may be influenced by nutritional state, in both individuals and colonies. This study examined the interaction between pollen storage and the effects of an infestation by the mite, Varroa jacobsoni Oudemans, in colonies of the honey bee, Apis mellifera L. We manipulated the pollen storage and mite infestation levels of colonies, and measured pollen foraging and brood rearing. Increased pollen stores decreased both the number of pollen foragers and pollen load size, while initially at least foragers from colonies with moderate infestations carried smaller pollen loads than those from lightly infested colonies. Over the course of the experiment, all colonies significantly increased pollen-foraging rates and pollen consumption, which was presumably a seasonal effect. Lightly infested colonies exhibited a larger increase in pollen forager number than moderately infested colonies, suggesting that more intense mite infestations compromised forager recruitment. Brood production was not affected by the addition of pollen, but moderately infested colonies were rearing significantly less brood by the end of the experiment than lightly infested colonies. Furthermore, the efficiency with which colonies converted pollen to brood decreased as the pollen storage level decreased and the infestation level increased. The results of this study may indicate that honey bee colonies adaptively alter brood-production efficiency in response to parasitic infestations and seasonal changes. Received: 3 May 1999 / Received in revised form: 14 September 1999 / Accepted: 25 September 1999     

Costs,Emissions Reductions,and Vehicle Repair: Evidence from Arizona

ABSTRACT

The Arizona inspection and maintenance (I/M) program provides one of the first opportunities to examine the costs and effectiveness of vehicle emission repair. This paper examines various aspects of emission reductions, fuel economy improvements, and repair costs, drawing data from over 80,000 vehicles that failed the I/M test in Arizona between 1995 and the first half of 1996. We summarize the wealth of data on repair from the Arizona program and highlight its limitations. Because missing or incomplete cost information has been a serious shortcoming for the evaluation of I/M programs, we develop a method for estimating repair costs when they are not reported. We find surprising evidence that almost one quarter of all vehicles that take the I/M test are never observed to pass the test. Using a statistical analysis, we provide some information about the differences between the vehicles that pass and those that do not. Older, more polluting vehicles are much more likely never to pass the I/M test, and their expected repair costs are much higher than those for newer cars.

This paper summarizes the evidence on costs and emission reductions in the Arizona program, comparing costs and emissions reductions between cars and trucks. Finally, we examine the potential for more cost-effective repair, first through an analysis of tightening I/M cut points and then by calculating the cost savings of achieving different emission reduction goals when the most cost-effective repairs are made first.     

Isotopic,Geochemical and Biological Tracing of the Source of an Impacted Karst Spring,Weldon Spring,Missouri

Weldon Spring is consistently enriched in 18 O relative to other karst springs in east-central Missouri and western Illinois, suggesting an evaporated source component. Regional potentiometric head maps of the shallow aquifer suggest that Prairie Lake, an artificial lake built between 1954 and 1982, could represent this component. Isotopic, biological and chemical tracing of the spring conclusively verify the hypothesis that this lake has impacted Weldon Spring. Mixing calculations indicate that Weldon Spring is now comprised of approximately 80% lake water and 20% groundwater. Recent measurements indicate that the discharge rate of the spring is now approximately 10 times the rate prior to the construction of the lake, confirming the augmentation of flow by a new source. Analysis of the isotopic trends indicates that the subsurface travel time is short, and suggests that the conduits connecting the lake and the spring may be progressively enlarging.