Silica-Enhanced Sorbents for Dry Injection Removal of SO2 from Flue Gas

Novel silica-enhanced lime sorbents were tested in a bench-scale sand-bed reactor for their potential for SO₂ removal from flue gas. Reactor conditions were 64°C (147°F), relative humidity of 60 percent [corresponding to an approach to saturation temperature of 10°C (18°F)], and inlet SO₂ concentration of 500 or 1000 ppm. The sorbents were prepared by pressure hydration of CaO or Ca(OH)₂ with siliceous materials at 100°C (101 kPa) [212°F (14.7 psi)] to 230°C (2793 kPa) [446°F (405 psi)] for 15 min to 4 h. Pressure hydration fostered the formation of a sorbent reactive with SO₂ from fly ash and Ca(OH)₂ in a much shorter time than did atmospheric hydration. The conversion of Ca(OH)₂ in the sand-bed reactor increased with the increasing weight ratio of fly ash to lime and correlated well with B.E.T. surface area, increasing with increasing surface area. The optimum temperature range for the pressure-hydration of fly ash with Ca(OH)₂ was between 110 and 160°C (230 and 320 °F). The pressure hydration of diatomaceous earth with CaO did not offer significant reactivity advantages over atmospheric hydration; however, the rate of enhancement of Ca(OH)₂ conversions was much faster with pressure hydration. Scanning electron microscope (SEM) and x-ray diffraction studies showed solids of different morphology with different fly ash/lime ratios and changing conditions of pressure hydration.     

Sorption of ionic liquids onto soils: experimental and chemometric studies

Chemometric analyses are a great tool to support typical experimental studies of the interactions of xenobiotics with natural environment. Such interpretations are able to determine statistically significant correlations and finally lead to identification of the major sorption factors. However, to effectively use chemometrics a bigger data set is required. Even though the ionic liquids are intensively studied, their complete fate or prediction of their behavior in the natural environment is still unclear. Therefore, to evaluate and distinguish the patterns of interactions of ILs in soil environment by chemometrics, sorption of nine ionic liquids (imidazolium and pyridinium chlorides) on 11 types of various soils was tested. Experimental studies indicated that compounds with longer alkyl side chains were sorbed far more strongly than weakly lipophilic ones. Moreover, salts with short and/or hydroxylated derivatives were more mobile in soils/sediments and thus, might cause a danger of contamination of surface or ground waters. Cluster analysis revealed that ionic liquids form two major clusters according to interaction with soil surface - one grouping compounds with short and hydroxylated alkyl side chains and the second with the rest of compounds. Pairwise scatterplots for correlations between soil variables and sorption coefficients indicated that the main soil parameter responsible for the sorption was cation exchange capacity. Correlation of sorption coefficients, K(d), with pH indicated the existence of lower sorption potency in lower pH values.     

Performance analysis of a solar-powered organic rankine cycle engine

This paper presents the performance analysis of a power plant with the Organic Rankine Cycle (ORC). The power plant is supplied by thermal energy utilized from a solar energy collector. R245fa was the working fluid in the thermodynamic cycle. The organic cycle with heat regeneration was built and tested experimentally. The ORC with a heat regenerator obtained the maximum thermodynamic efficiency of approximately 9%.     

Use of fly ash agglomerates for removal of arsenic

The aim of this work is to investigate the application of fly ash adsorbent for removal of arsenite ions from dilute solution (100–1,000 ppm). Experiments were carried out using material from the “Turów” (Poland) brown-coal-burning power plant, which was wetted, then mixed and tumbled in a granulator to form spherical agglomerates. Measurements of arsenic adsorption from aqueous solution were carried out at room temperature and natural pH of fly ash agglomerates, in either a shaken flask or circulating column, to compare two different methods of contacting solution with adsorbent. Adsorption isotherms of arsenic were determined for agglomerated material using the Freundlich equation. Kinetic studies indicated that sorption follows a pseudo-second-order model. Preferable method to carry out the process is continuous circulation of arsenite solution through a column.     

The effect of mycorrhiza on the growth and elemental composition of Ni-hyperaccumulating plant Berkheya coddii Roessler

The effect of arbuscular mycorrhizal fungi (AMF) on growth and element uptake by Ni-hyperaccumulating plant, Berkheya coddii, was studied. Plants were grown under laboratory conditions on ultramafic soil without or with the AM fungi of different origin. The AM colonization, especially with the indigenous strain, significantly enhanced plants growth and their survival. AMF affected also the elemental concentrations that were studied with Particle-induced X-ray emission (PIXE). AMF (i) increased K and Fe in shoots, Zn and Mn in roots, P and Ca both, in roots and shoots; (ii) decreased Mn in shoots, Co and Ni both, in shoots and roots. Due to higher biomass of mycorrhizal plants, total Ni content was up to 20 times higher in mycorrhizal plants compared to the non-mycorrhizal ones. The AMF enhancement of Ni uptake may therefore provide an improvement of a presently used technique of nickel phytomining.     

Hydrodechlorination of dichlorobenzenes and their derivatives over Ni-Mo/C catalyst: kinetic analysis and effect of molecular structure of reactant

The kinetics of the catalytic hydrodechlorination (HDC) process of selected dichlorobenzenes (DCBs), dichlorotoluenes (DCTs) and dichlorodiphenyls (DCDs) was studied in the presence of a sulphided carbon-supported Ni-Mo catalyst. The HDC runs were performed in a magnetic stirred batch reactor in the range of 210-230 °C under the hydrogen pressure of 3 MPa. The kinetic constants were evaluated and the reaction network was proposed assuming the pseudo-first order kinetics of dechlorination process. The HDC of aromatic dichloroderivatives proceeded via a network of sequential-parallel reactions. At 210 °C DCBs, DCTs and DCDs followed mainly the pathway of direct transformation to respective aromatic hydrocarbon. At 230 °C, the contribution of sequential dechlorination to monochloroderivative became more predominant.     

Analysis of selected fungi variation and its dependence on season and mountain range in southern Poland—key factors in drawing up trial guidelines for aeromycological monitoring

The aim of the study was to identify fungal spores, in particular plant pathogenic fungi, occurring in the air in selected mountain ranges. The results revealed not only the array of fungal species migrating with air currents from the Czech Republic and Slovakia but also how the season of the year affects the distribution of spores. Such studies may lay a foundation for future aeromycological monitoring, in accordance with the requirements for integrated plant protection. Aeromycological research was carried out between 2013 and 2016 at 3-month intervals in mountainous areas along the southern borders of Poland: the Bieszczady, the Pieniny, the Giant Mountains (Karkonosze) and the Babia Góra Massif. The research relied on impact method employing Air Ideal 3P sampler, which, by drawing in atmospheric air, also collects fungal spores. Regardless of altitudinal zonation, the changing weather conditions appeared to be the main reason for the variations in the number of the fungal spores under study in those years.     

Cash and voucher assistance along humanitarian supply chains: a literature review and directions for future research

This study reviews research on cash and voucher assistance (CVA) by applying a humanitarian supply chain management perspective. A systematic literature review was conducted to identify, analyse, and synthesise past academic research. The content, context, and process framework was used to structure the content analysis. The findings reveal that the outcomes of CVA programmes are dependent on critical context-specific variables that influence feasibility and operability. Humanitarian actors must consider factors that are external (the nature of disaster, politics, economy, and infrastructure) and internal (local market availability and accessibility, supplier/donor interest, supplier/vendor selection and contracting, and beneficiary preference) to the supply chain. The delivery process is influenced by them, impacting on programme responsiveness and cost-efficiency. The results provide insights that humanitarian practitioners can utilise to reconsider their supply chain strategies when deciding on the selection and implementation of CVA programmes. Potential literature gaps are identified, and recommendations for further research are provided.