Separation of selected PAHs by using high performance capillary electrophoresis with modifiers

The effect of varying SDS concentration in a micellar electrokinetic capillary chromatographic system (MECC) is investigated. In addition, the introduction of -cyclodextrin as modifier to the electrophoretic medium, containing SDS and a phosphate-borate buffer, is shown to give satisfactory separation of the seven selected PAHs. The separation efficiency is increased with the addition of -cyclodextrin.     

离子交换树脂光度法测定微量铁的研究

研究了以阳离子交换树脂为显色载体，利用直接吸附在树脂上有色络合物－Fe(II)邻二氮菲的吸光度，借以检测水和火腿肠中铁的新方法，本法具有比原子吸收法更高的灵敏度，稳定性和选择性，并对成络及树脂吸附条件作了较详细研究。     

苯胺类化合物含量对还原--偶氮光度法测定硝基苯的影响

通过将硝基苯和苯胺以不同比例混合制作标准曲线，讨论苯胺类化合物含量对还原－偶氮光度法测定硝基苯的影响。     

Modeling the spatial pattern of farmland using GIS and multiple logistic regression: a case study of Maotiao River Basin, Guizhou Province, China

Land use change is an important topic in the field of global environmental change and sustainable development. Land use change modeling has attracted substantial attention because it helps researchers understand the mechanisms of land use change and assists regulatory bodies in formulating relevant policies. Maotiao River Basin is located in the province of Guizhou, China, which has a developed agricultural industry in the karst mountain areas. This paper selected biophysical and social–economic factors as independent variables, and constructed a multiple logistic regression of farmland spatial distribution probability by random sampling. Then, by using GIS technology and integrating the 2000 data, this study predicted the farmland spatial pattern. When the predicted map was compared with the actual farmland map for 2000, we noted that 71% of the simulation is in accordance with the 2000 farmland pattern. The result satisfactorily proves the reasonability and applicability of our model.     

Performance evaluation of a sorbent tube sampling method using short path thermal desorption for volatile organic compounds

Air sampling, using sorbents, thermal desorption and gas chromatography, is a versatile method for identifying and quantifying trace levels of volatile organic compounds (VOCs). Thermal desorption can provide high sensitivity, appropropriate choices of sorbents and method parameters can accommodate a wide range of compounds and high humidity, and automated short-path systems can minimize artifacts, losses and carry-over effects. This study evaluates the performance of a short-path thermal desorption method for 77 VOCs using laboratory and field tests and a dual sorbent system (Tenax GR, Carbosieve SIII). Laboratory tests showed that the method requirements for ambient air sampling were easily achieved for most compounds, e.g., using the average and standard deviation across target compounds, blank emissions were < or = 0.3 ng per sorbent tube for all target compounds except benzene, toluene and phenol; the method detection limit was 0.05 +/- 0.08 ppb, reproducibility was 12 +/- 6%, linearity, as the relative standard deviation of relative response factors, was 16 +/- 9%, desorption efficiency was 99 +/- 28%, samples stored for 1-6 weeks had recoveries of 87 +/- 9%, and high humidity samples had recoveries of 102 +/- 12%. Due to sorbent, column and detector characteristics, performance was somewhat poorer for phenol groups, ketones, and nitrogen containing compounds. The laboratory results were confirmed in an analysis of replicate samples collected in two field studies that sampled ambient air along roadways and indoor air in a large office building. Replicates collected under field conditions demonstrated good agreement except for very low concentrations or large (> 41 volume) samples of high humidity air. Overall, the method provides excellent performance and satisfactory throughput for many applications.     

车载巡测在区域射频电磁环境质量监测与表征中的应用分析

对北京中央电视塔周围25 km²区域电磁环境质量分别进行了射频的网格法手工监测和车载巡测自动监测，通过SPSS软件等对两种监测方法获取的数据进行了统计对比分析，发现两组数据在总体水平及数值分布特征上较为接近，因此车载巡测监测可以替代网格法监测。以车载巡测数据为基础，绘制了实测数据的道路电磁地图，利用插值法绘制了区域电磁地图，对区域电磁环境质量进行了直观表征。从回应公众关注和城市电磁规划出发，建议今后可利用车载巡测监测加强时域和频域的监测。     

上海汽车制造业涂装废气VOCs排放特征

于2015年10月对上海市嘉定区4家(A、B、C、D)汽车制造企业涂装废气ρ(VOCs)和组成特征进行了调查分析。结果表明,A、B、C、D厂涂装废气排放口ρ(VOCs)总为0. 743～6. 11 mg/m~3,主要检出物和最高检出值分别为:A厂二甲苯2. 06 mg/m~3、B厂二甲苯0. 578 mg/m~3、C厂甲苯2. 59 mg/m~3、D厂庚烷0. 274 mg/m~3;芳香烃类是A、B、C厂排放比例最高的VOCs组分,烷烃类是D厂排放比例最高的VOCs组分。指出,原、辅料种类影响排放物的主要成分,废气处理工艺类型影响排放物主要成分和浓度。     

浅谈GAM与GM（1,1）模型

对ＧＡＭ水环境预测模型提出了四点不同看法，与有关作者商榷，指出ＧＭ（１，１）模型与ＧＡＭ模型二者并无优劣之差，精度亦相当。     

加强建设 量化管理 推进环境监测事业持续发展

介绍了南京市环境监测中心站近年来在拓展监测能力,提升监测现代化水平,优化资源配置,加强队伍建设,强化制度建设,实施目标管理等方面采取的举措,指出在我国环境保护发生历史性转变的关键时期,环境监测站应在社会、经济、环境的协调发展中,充分发挥为管理服务的前瞻性、监测信息上报的及时性及实施环境决策的支持性作用,积极推进环境监测事业持续发展.     

合肥地区重金属污染生物监测的初步研究 --以大蜀山铅镉的白鹭监测为例

将合肥地区大蜀山的白（Egretta garzetta）卵和组织样品，用原子吸收法时样品中的Pb、Cd等重金属污染物进行了检测，结果表明，这2种重金属元素在卵和组织中均有不同程度的检出，其中Cd在卵的内容物中残留量较低。而且这2种重金属污染物在鹭卵不同部分的残留量均有差异；同其他地区类似的研究结果相比，合肥地区鹭卵中重金属残留水平相时较高。