大型碳化硅生产园区面源源强及减排指标核算

以某年产25万吨大型碳化硅园区无组织排放面源为例,提出基于多个地面站气象数据的CALPUFF模型地面浓度反推方法,优化流场模拟,使得无组织面源源强核算结果更加准确,并以环境保护目标空气质量达标为原则,核算其大气污染物减排指标,得出具体结论:园区大气污染物SO2、NOX、CO、PM10年排放量分别为449.06t、86.98t、5158.58t、115.06t;无组织排放SO2、CO及PM10的减排比例分别为63.5%、19.2%、42.44%,对应减排量分别为285.16 t/a、990.45 t/a、48.83 t/a。     

煤矿采空塌陷对地下水的影响

在煤炭开采过程中,煤炭被采出后其所在地下煤层会形成一定区域的采空区,并使煤层上方的顶板岩层失去支撑,由于顶板岩层的抗拉强度比较有限,因此在其顶板岩层自身重力与上覆岩层压力的影响下,很容易因顶板断裂、破碎而出现采空塌陷问题,这不仅会影响煤矿所在区域的生态安全,同时还会使地下水受到较大的负面影响。为此,本文结合煤矿采空塌陷的特点,围绕采空塌陷对地下水的影响展开了分析,并在此基础上提出了一些较为可行的采空塌陷区域地下水治理保护建议。     

豆制品加工废水处理工程设计分析

豆制品加工废水有机物和悬浮物浓度较高,水量及水质波动大,且容易发酸发臭。浙江某豆制品生产企业采用化学沉淀+SBR生化工艺对废水进行处理,出水水质达到《污水综合排放标准》GB8978-1996三级标准。该工艺操作简便,运行稳定,处理效率高,适合中小规模豆制品企业废水的处理。     

环境检测中地表水检测现状及进展

地表水作为维持人类正常生产生活的重要资源,应作为环境监测的首要任务常抓不懈。现今对地表水的检测工作中仍存在较多不完善之处,应从环境保护的大局出发,应用合理的检测技术,将地表水检测工作提升到新的高度。本文分析了环境检测中地表水的检测现状,并提出了相应的解决措施。     

UiO-66(Zr)@多孔陶瓷复合材料的制备及对络合态重金属EDTA-Cu(Ⅱ)的去除

本文采用多孔陶瓷作为基体制备了锆基金属有机骨架UiO-66@多孔陶瓷复合材料.通过扫描电子显微镜(SEM)、粉末X射线衍射(PXRD)、氮气吸附和傅里叶变换红外光谱(FTIR)等表征手段对比了氢氧化钠脱硅和乙二胺表面改性等基体活化方式对UiO-66(Zr)在多孔陶瓷表面负载情况的影响.结果表明,经过乙二胺表面改性的多孔陶瓷对UiO-66(Zr)的负载更均匀,负载效果更好.以EDTA-Cu(Ⅱ)为考察对象,研究了UiO-66(Zr)@乙二胺表面改性多孔陶瓷复合材料对络合态重金属的净化效能.结果表明,UiO-66(Zr)@多孔陶瓷复合材料在较宽的酸碱条件下(pH=3—9)对络合态重金属EDTA-Cu(Ⅱ)均表现出良好的吸附性能,饱和吸附量为1.17 mg·g~(-1),并可通过NaOH解吸再生,从而实现材料的重复利用.     

耐盐苯酚降解菌Staphylococcus sp.的分离及降解特性

从巴丹吉林沙漠盐湖表层沉积物中筛选到一株高效耐盐苯酚降解菌CL.测定了菌株CL的生理生化指标、16S rRNA基因序列,通过动力学模型探究了该菌株的生长和苯酚降解特性,同时考察了固定化对其耐受及降解苯酚能力的影响.结果表明,菌株CL属于葡萄球菌属(Staphylococcus sp.),在温度30℃、pH 7.0—8.0、盐度0—10%和苯酚浓度100—200 mg·L~(-1)条件下,该菌株能高效降解苯酚,其降解率均在85%以上.菌株CL对不同浓度苯酚的降解符合Haldane模型,其最大比降解速率和抑制常数分别为0.32 h~(-1)和351.70 mg·L~(-1),同时该菌株在不同盐度下对苯酚的降解符合Ghose and Tyagi模型.固定化可以明显增加菌株CL对苯酚的降解和耐受能力.菌株CL在高盐环境下能够高效降解苯酚,具有生物处理高盐含酚废水的潜力.     

加氢裂化REAC系统双相不锈钢管道焊缝铁素体含量的讨论

本文介绍了专利商对应用于加氢裂化REAC系统的双相不锈钢S32205焊接接头的要求,简要说明了双相不锈钢的焊接工艺评定;分析了填充金属化学成分、焊接线能量、焊接冷却速度对双相不锈钢焊缝铁素体含量的影响;分析了双相不锈钢焊缝铁素体含量达到专利商要求的能力,以及手工电弧焊焊缝铁素体含量达不到专利商35%~60%要求的原因是焊条化学成分设计的结果;分析了焊缝铁素体含量要求的合理性,介绍了AWS、API、NACE及国家行业标准对于双相不锈钢焊接接头铁素体含量的要求;介绍了现场的焊接工艺,以及使实际焊缝达到使用要求的方法.     

Scenario-based assessment and multi-objective optimization of urban development plan with carrying capacity of water system

• Impact of urban development on water system is assessed with carrying capacity. • Impacts on both water resource quantity and environmental quality are involved. • Multi-objective optimization revealing system trade-off facilitate the regulation. • Efficiency, scale and structure of urban development are regulated in two stages. • A roadmap approaching more sustainable development is provided for the case city. Environmental impact assessments and subsequent regulation measures of urban development plans are critical to human progress toward sustainability, since these plans set the scale and structure targets of future socioeconomic development. A three-step methodology for assessing and optimizing an urban development plan focusing on its impacts on the water system was developed. The methodology first predicted the pressure on the water system caused by implementation of the plan under distinct scenarios, then compared the pressure with the carrying capacity threshold to verify the system status; finally, a multi-objective optimization method was used to propose regulation solutions. The methodology enabled evaluation of the water system carrying state, taking socioeconomic development uncertainties into account, and multiple sets of improvement measures under different decisionmaker preferences were generated. The methodology was applied in the case of Zhoushan city in South-east China. The assessment results showed that overloading problems occurred in 11 out of the 13 zones in Zhoushan, with the potential pressure varying from 1.1 to 18.3 times the carrying capacity. As a basic regulation measure, an environmental efficiency upgrade could relieve the overloading in 4 zones and reduce 9%‒63% of the pressure. The optimization of industrial development showed that the pressure could be controlled under the carrying capacity threshold if the planned scale was reduced by 24% and the industrial structure was transformed. Various regulation schemes including a more suitable scale and structure with necessary efficiency standards are provided for decisionmakers that can help the case city approach a more sustainable development pattern.     

Transformation of hazardous lead into aluminosilicate ceramics: structure evolution and lead leaching

This study investigated crystallization mechanisms for the formation of lead aluminosilicate by sintering lead stabilization with kaolin-based precursors. PbAl2Si2O8 was found to be the only stable lead aluminosilicate in low-PbO system and demonstrates its highly intrinsic resistance to acid attack in leaching test. A three-stage PbAl2Si2O8 formation mechanism was supported by the results of the changing temperature in the system. Amorphization of sintered products was observed in both PbO/kaolinite and PbO/mullite systems at 600–700°C. When the temperature was increased to 750–900°C, the crystallochemical formation of lead aluminosilicates (i.e., Pb4Al4Si3O16, Pb6Al6Si2O21, and PbAl2Si2O8) was observed. Pb4Al4Si3O16 and Pb6Al6Si2O21 were found to be the intermediate phases at 700–900°C. Finally, PbAl2Si2O8 was found to be the only crystallite phase to host Pb at above 950°C. A maximum of 80% and 96.7% Pb can be incorporated into PbAl2Si2O8 in PbO/kaolinite and PbO/mullite systems, respectively, but the final products exhibited different microstructures. To reduce environmental hazard of lead, this strategy demonstrated a preferred mechanism of immobilizing lead into PbAl2Si2O8 structure via kaolin-based precursors.     

Molecular,functional, and cellular alterations of oocytes and cumulus cells induced by heat stress and shock in animals

Environmental Science and Pollution Research - Global warming is considered as the main environmental stress affecting ecosystems as well as physiological and biochemical characteristics, and...