区域土地利用类型对水源水中溶解性有机物丰度和荧光组分的影响

以潮白河密云段水体为研究对象,采用三维荧光光谱法及平行因子分析解析了潮白河饮用水源中溶解性有机物(DOM)来源和荧光特性,结合方差分析探讨了不同季节和区域土地利用类型对DOM浓度和荧光组分强度的影响.结果表明,潮白河密云段水体荧光溶解性有机物(FDOM)由5种荧光组分组成,包括微生物腐殖质2种,自生酪氨酸,还原醌类和陆...     

基于CYCBD和麻雀搜索算法的滚动轴承故障特征提取方法

目的解决在较强的噪声环境下最大二阶循环平稳盲解卷积(MaximumSecond OrderCyclostationary Blind Deconvolution,CYCBD)算法在滚动轴承故障特征提取时效果欠佳的问题,为滚转尾翼导弹的尾翼滚动轴承故障诊断提供方法参考。方法提出一种利用麻雀搜索算法(SparrowSearchAlgorithm,SSA)优化CYCBD算法的方法,将CYCBD算法解卷积的包络谱熵作为SSA寻优的适应度函数,利用SSA高效地寻找出合适的循环频率以及滤波器长度,选择自适应参数后,再使用CYCBD算法有效解卷得到周期脉冲特征。结果同时对比SSA优化CYCBD前后进行故障特征提取的包络谱图,CYCBD的噪声幅值不超过0.13 m/s^(2),峰值不超过0.29 m/s^(2),用SSA优化CYCBD的噪声幅值不超过0.08 m/s^(2),峰值不超过0.32 m/s^(2),故障频率成分更加突显,无论是噪声幅度,还是峰值幅度特性,均较CYCBD有了较大改善。结论仿真实验验证了SSA优化CYCBD方法能够更加清晰地辨识到故障特征频率及其倍频成分,其具有良好的工程应用前景。     

不同类型电镀液中阴离子的离子色谱法检测

采用抑制型电导离子色谱法检测电镀液中的常见阴离子.色谱条件是: IonPac AS11-HC阴离子交换色谱柱,淋洗液自动发生装置在线产生KOH梯度淋洗,抑制型电导检测.检测限(S/N=3)在0.29-15.3 μg·l-1,阴离子F-,Cl-,MSA-,NO-3,SO2-4,PO3-4和CrO2-4的线性范围均在两个数量级以上,RSD在5%以下,回收率为92%-110%,具有灵敏度高,选择性好,重现性佳等特点,用于实际样品的检测,结果令人满意.     

交联壳聚糖对铀的吸附研究

以壳聚糖(CTS)为原料,在碱性条件下用环氧氯丙烷对壳聚糖进行化学改性,制得不溶水的交联壳聚糖(CCTS)。利用CCTS吸附铀(UO22+),探讨吸附动力学规律以及初始浓度,pH值的影响。实验结果表明,CCTS对UO22+的吸附符合Langmu ir吸附等温模型,并能用准二级速率方程对吸附动力学加以描述。当在CCTS为10 mg,pH为3,UO22+初始浓度为50μg/mL条件下,CCTS对UO22+的吸附去除率为98%以上。     

铝盐絮凝剂及其环境效应

概述了铝盐絮凝剂的结构、形态分布及铝盐絮凝剂对环境所产生的一些不良影响,描述了铝盐絮凝剂对人体及各种生物体的毒性作用,同时,介绍了对污水后续处理的影响,并作了简要的评述。     

铁炭内电解-厌氧-好氧工艺处理阿维菌素废水的试验研究

血清瓶毒性试验表明 ,AVM对厌氧消化产生强烈的抑制作用。AVM废水经铁炭内电解预处理后 ,COD和AVM的去除率分别达到 19.5 %和 6 8.5 % ,可大大降低废水的毒性。预处理出水再经UASB +生物接触氧化反应器进一步处理 ,当生化系统进水COD为 6 0 0 0— 6 5 0 0mg/L时 ,出水COD为 2 5 0— 2 80mg/L ,总COD去除率达到 95 .6 % ,出水达到生物制药行业排放标准     

Estimation and characterization of PCDD/Fs and dioxin-like PCBs from Chinese iron foundries

The iron foundry industry is considered to be a potential source of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). This study investigated the emission factors and total emission amounts of PCDD/Fs and dioxin-like polychlorinated biphenyls (DL-PCBs) from iron foundries in China. The concentrations and the World Health Organization toxicity equivalents (WHO-TEQs) are presented and the congener profiles are discussed in this paper.In the present work, 26 fly ash samples were collected and tested to quantify the PCDD/Fs and DL-PCBs generated by 14 plants of different scales, and five stack gas samples were collected from two (named as EFG and LFG) of those plants. The emission levels of PCDD/Fs and DL-PCBs indicated that hot-air cupolas had lower emissions than cold-air cupolas. When iron ore lump and sinter were used as raw material, the emission factors were about 250 ng TEQ t⁻¹ of product. However, if the raw material was scrap, the emission factors varied owing to the different contents of organic materials in the raw materials. It was found that the mean WHO-TEQ values of PCDD/Fs and DL-PCBs were 144 and 34.2 pg Nm⁻³ in stack gas and 20.0 and 1.58 pg g⁻¹ in fly ash. In multiple tests, it was estimated that the mean emission factors of PCDD/Fs and DL-PCBs were 365 and 10.9 ng WHO-TEQ t⁻¹ released to residue and 2719 and 555 ng TEQ t⁻¹ released to air. The total emission amounts of PCDD/Fs and DL-PCBs from Chinese iron foundries with cupola furnaces released to residue and air were 16.8 and 146 g WHO-TEQ in 2008, respectively.     

Estimation and characterization of unintentionally produced persistent organic pollutant emission from converter steelmaking processes

Unintentionally produced persistent organic pollutants (UP-POPs) including polychlorinated dibenzo-p-dioxins, and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs), and polychlorinated naphthalenes (PCNs) were characterized and quantified in stack gas and fly ash from the second ventilation systems in five typical converters in five different steelmaking plants. The 2378-substituted PCDD/Fs (2378-PCDD/Fs) and dioxin-like PCB (dl-PCBs) toxic equivalents (TEQs) were 1.84–10.3 pg WHO-TEQ Nm^?3 in the stack gas and 5.59–87.6 pg WHO-TEQ g^?1 in the fly ash, and the PCN TEQs were 0.06–0.56 pg TEQ Nm^?3 in the stack gas and 0.03–0.08 pg TEQ g^?1 in the fly ash. The concentrations of UP-POPs in the present study were generally lower than those in other metallurgical processes, such as electric arc furnaces, iron ore sintering, and secondary metallurgical processes. Adding scrap metal might increase UP-POP emissions, indicating that raw material composition was a key influence on emissions. HxCDF, HpCDF, OCDF, HpCDD, and OCDD were the dominant PCDD/Fs in the stack gas and fly ash. TeCB and PeCB were dominant in the stack gas, but HxCB provided more to the total PCB concentrations in the fly ash. The lower chlorinated PCNs were dominant in all of the samples. The 2378-PCDD/F, dl-PCB, and PCN emission factors in stack gases from the steelmaking converter processes (per ton of steel produced) were 1.88–2.89, 0.14–0.76_, and 229–759 μg t^?1, respectively.     

某造桥厂噪声影响分析与控制

对某桥梁制造厂进行噪声监测,得到该厂设备噪声影响情况,找到主要噪声源,提出具有针对性的噪声控制对策,为项目的整改提供了科学依据.     

电炉钢渣对水中Cu2+、Cd2+和Pb2+的去除作用

以宝钢电炉钢渣为研究对象,考察了钢渣对溶液中重金属离子Cu2+、Cd2+、Pb2+的吸附动力学、吸附等温线、吸附热力学特征,借助多种分析手段(XRD、BET比表面分析、SEM/EDS等)对钢渣进行了理化性能测试和表征.结果表明,电炉钢渣对重金属离子的吸附速率较快,吸附速率顺序为Cd2+>Pb2+>Cu2+,吸附过程符合一级动力学模型(R2>0.99).吸附等温实验结果表明,Langmuir模型较为适合重金属离子在钢渣上的吸附,实验条件下对Cu2+、Cd2+、Pb2+离子的最大吸附容量分别为0.101、0.058、0.120 mmol.g-1.3种重金属离子在钢渣上的吸附是一个吸热(ΔH0<0)、熵值增大(ΔS0>0)的自发反应过程(ΔG0<0),熵效应是吸附反应自发进行的主要驱动力.SEM/EDS分析结果揭示了吸附前后钢渣表面形貌和化学成分的变化.电炉钢渣以其低价、高效性在重金属废水处理中具有广阔的应用前景.