土壤镉污染的现状及修复研究进展

镉是一种对人类和动物健康危害严重的重金属。土壤镉污染问题已经成为全球研究热点。重点分析了镉污染土壤中镉的来源,镉对动植物、人体的危害,并提出了对镉污染土壤的修复的方法。     

Preparation of MgO/B2O3 coatings by plasma spraying on SUS304 surface and effects of heat-resistant

This study mainly deals with the preparation of MgO/B₂O₃ coatings by plasma spraying on the SUS304 surface and the effects of heatresistant. The power materials of low thermal conductivity were selected to control the heat divergent performance of high temperature parts. The reticular micro-structure between the cover thermal layer and the substrate was prepared by using the plasma spraying method. The powder mixture of MgO and B₂O₃ were selected as spraying materials and the SUS304 was used as the substrate material. The MgO/B₂O₃ coating was prepared on the surface of the SUS304 to provide better cover thermal performance. The properties of the microstructures and the morphologies were studied by Optical Microscope, Scanning Electron Microscope, Electron Probe Microanalyzer, and X-ray Diffraction. The results showed that the cover thermal performance has been improved.     

Formation of THMs and HANs during bromination of Microcystis aeruginosa

Bromine-contained disinfectants and biocides are widely used in swimming pools, recreational waters and cooling towers. The objective of this study was to evaluate the formation of thrihalomethanes (THMs) and haloacetonitriles (HANs) and their cytotoxicity in algae solutions during free bromine disinfection. Disinfection by-products formation potential experiments were conducted using model solutions containing 7 mg/L (as total organic carbon) Microcystis aeruginosa cells. Effects of free bromine dosage, pH and ammonia were investigated. The results showed that brominated disinfection by-products were the major products when free bromine was applied. The total THMs formed during bromination was much as that formed during chlorination, whereas HANs were elevated by using bromination instead of chlorination. Dibromoacetonitrice (C2H2NBr2 ) and bromoform (CHBr3 ) were the only detected species during free bromine disinfection. The production of C2H2NBr2 and CHBr 3 increased with disinfectant dosage but decreased with dosing ammonia. CHBr3 increased with the pH changing from 5 to 9. However, C2H2NBr2 achieved the highest production at neutral pH, which was due to a joint effect of variation in hydrolysis rate and free bromine reactivity. The hydrolysis of C2H2NBr2 was base-catalytic and nearly unaffected by disinfectant. Finally, estimation of cytotoxicity of the disinfected algae solutions showed that HANs formation was responsible for the majority of toxicity. Considering its highest toxicity among the measured disinfection by-products, the elevated C2H2NBr2 should be considered when using bromine-related algaecide.     

我国水泥工业碳排放特征及动态变化分析

水泥工业是温室气体二氧化碳(CO2)的主要排放源,利用碳排放数学模型计算2001-2010年我国水泥工业碳的排放量,分析碳排放量的变化特点和发展趋势。结果表明:水泥工业碳排放总量逐年增长,与水泥产量和排放强度呈线性关系。"十一五"期间单位产品碳排放强度由0.69 t/t下降到0.65 t/t。万元GDP碳排放量2008年达到最低值为0.295 1 t,平均每年万元GDP碳排放量下降2.85%。水泥工业十年间实施节能降耗、资源循环利用、提高经济效益等措施,对于减少碳排放具有明显效果。     

铬(Ⅵ)土著还原菌筛选及初步鉴定实验研究

以重铬酸钾为供试物,用固体平板法和还原实验对铬(Ⅵ)土著还原菌进行筛选,用载片培养法、革兰氏染色法、鞭毛染色法、芽孢染色法对还原菌做初步的鉴定,共筛选出16株铬(Ⅵ)土著还原菌,并挑选出还原率相对较高的Z2(35.2%)、Z3(45.2%)、Z4(38.6%)、X8(30.4%)、X10(29.4%)作为铬(Ⅵ)的优势还原菌株。经初步鉴定,土著真菌Z2为黑曲霉(Aspergillusniger),Z3、Z4为镰刀菌属(Fusariumsp.),土著细菌X8、X10为芽孢杆菌(Bacillussp.)。实验的方法和成果将为铬(Ⅵ)污染土壤微生物治理技术的推广应用提供技术支持。     

磁性纳米Fe_3O_4对毒死蜱的增效和催化降解研究

应用溶剂热法制备了磁性纳米Fe3O4(NMFO),并用聚乙二醇-6000对其进行改性,使纳米Fe3O4表面由亲水性转变为亲脂性,从而实现与亲脂性毒死蜱的复合。纳米Fe3O4的加入使毒死蜱的生物活性明显提高。室内毒力试验结果表明:含0.2%纳米Fe3O4的Fe3O4/毒死蜱制剂的毒力在室内和紫外光照下分别是同浓度纯毒死蜱的3.84倍和4.17倍;其降解率也显著提高,纳米Fe3O4/毒死蜱制剂在太阳光照下放置10 d,其降解率可达93.2%,相同条件下纯毒死蜱的降解率是10.14%,而将添加或未添加纳米Fe3O4的毒死蜱于暗处放置相同的时间,其降解率分别为1.21%和0.23%。     

双水相浮选-HPLC法测定水中氯硝柳胺

文章建立了双水相浮选-高效液相色谱法来测定环境水中氯硝柳胺的含量。选择丙酮为亲水有机溶剂,40%(NH4)2SO4溶液为分相剂。当pH为3.0,氮气流速为20 min/mL,浮选时间为30 min时,萃取率达93.4%。该方法具有高效、绿色环保以及低成本等优点,是一种测定水样中氯硝柳胺含量的新方法。     

固定污染源烟气中氧含量监测方法比对

为了解电化学法、激光法、氧化锆法在测定固定污染源烟气中氧含量时存在的差异,进行方法比对实验,结果表明这三种方法均具有较好的精密度.对这三种方法测定结果进行t检验,结果表明三种监测方法间无显著性差异.     

GC/MS和GC/AED联用技术分析氯代邻羟基二苯醚类化合物的探讨

本文针对三氯新在脱氯反应过程中会产生多种二苯醚类化合物,提出采用GC/MS与GC-AED联用技术,对所有过程产物做出定性或定量分析,并通过实验证明其可行性.