High crosslinked sodium carboxyl methylstarch-g-poly (acrylic acid-co-acrylamide) resin for heavy metal adsorption: its characteristics and mechanisms

Environmental Science and Pollution Research - A lower expansive heavy metal adsorbent, high crosslinked sodium carboxyl methylstarch-g-poly (acrylic acid-co-acrylamide) resin (HCAA), has been...     

Experimental research on emission and removal of dioxins in flue gas from a co-combustion of MSW and coal incinerator

This paper describes the experimental study of dioxins removal from flue gas from a co-combustion municipal solid waste and coal incinerator by means of a fluidized absorption tower and a fabric filter. A test rig has been set up. The flow rate of flue gas of the test rig is 150-2000 m3/h. The system was composed of a humidification and cooling system, an absorption tower, a demister, a slurry make-up tank, a desilter, a fabric filter and a measurement system. The total height of the absorption tower was 6.5m, and the diameter of the reactor pool was 1.2 m. When the absorbent was 1% limestone slurry, the recirculation ratio was 3, the jet rate was 5-15 m/s and the submerged depth of the bubbling pipe under the slurry was 0.14 m, the removal efficiency for dioxins was 99.35%. The concentration of dioxins in the treated flue gas was 0.1573 x 10(-13)kg/Nm3 and the concentration of oxygen was 11%. This concentration is comparable to the emission standards of other developed countries.     

分子印迹技术在环境科学领域中的应用

分子印迹技术（MIT）是一门新兴的边缘科学技术,它的产生与发展为环境科学打开了又一视角。介绍了MIT的产生与发展及基本原理,综述了MIT在环境科学领域中的应用,主要包括MIT在固相萃取、膜分离、色谱分析、传感器及分子印迹聚合物作为催化剂在环境修复中的应用。     

流动注射-氢化物发生-原子荧光光谱法测定土壤中铅

采用流动注射-氢化物发生-原子荧光光谱法测定土壤中的铅,工作曲线线性关系良好,检出限为0.25 mg/kg,相对标准偏差＜3.5%,加标回收率为93.0%～105%.该方法简便快速,测定结果准确可靠.     

黄土高原能源富集区水—能源—粮食纽带系统安全时空耦合协调关系分析——以榆阳区为例

黄土高原能源富集区是我国重要的能源基地和粮食主产区,其水资源匮乏使区域水—能源—粮食纽带系统可持续发展面临严峻挑战。为研究黄土高原能源富集区能源、粮食与水资源之间协调发展状况,本研究以水—能源—粮食纽带系统安全为核心,通过构建水—能源—粮食纽带系统安全评价指标体系,采用TOPSIS模型和耦合协调度模型,分析了典型案例地榆林市及榆阳区水—能源—粮食纽带系统安全水平及其耦合协调关联特征。结果表明：从水—能源—粮食纽带系统耦合协调关系来看,榆林市各区县水—能源—粮食纽带系统耦合度整体较高且近年来呈现缓慢下降趋势,耦合协调度呈现“北高南低”格局且近年来表现出轻微下降趋势。从榆阳区层面来看,榆阳区水—能源—粮食纽带系统耦合度较高,耦合协调度呈现由中度协调向优质协调发展态势,水资源系统制约水—能源—粮食纽带系统安全发展,能源子系统波动性较强。为协调能源富集区水—能源—粮食纽带系统可持续发展,政府应健全跨部门协调机制,因地制宜、合理规划产业布局,同时构建节约高效的资源管理体系,提升资源使用效率。     

重庆市废润滑油的污染状况及改善策略的研究

针对重庆市2005年3～9月的半年时间里,仅嘉陵江主城流域内即出现四起重大油污染事故的现象,开展了对重庆市各类废润滑油年均产生量及处理现状的跟踪调研,结果表明:重庆市废润滑油的不当处理,在造成约5.5万t/a宝贵资源大量浪费的同时,还形成了对长江水系的严重污染。为推动重庆市经济的可持续发展和有效的保护环境,对目前在废油处理中存在的问题,进行了深层次原因的分析,并提出解决这些问题的有效措施:完善废油回收处理机制及体系,统一建立一个年处理能力在10万t以上的废油专业再生厂,通过废油再生的产业化实现对资源的最大化利用和对环境污染的最小化。     

水葫芦厌氧发酵工程化应用研究

在实验室进行了接种率、破碎程度和温度等对水葫芦厌氧发酵产气率的影响研究.结果表明:水葫芦在中温35℃下,水葫芦和接种污泥的最佳接种率为1:1(总固体物质比),经简单切分后产气率最高,原料产气率为0.540 m3/d(以每千克固体含量计,下同);高温消化与中温消化相比,产气率无明显优势.在实验室研究基础上,对中国农村地区原有的沼气发酵工艺进行适当的改进,设计构建了5 m3 15 m3(酸化池 产气池)两级反应池,该反应池在夏季常温条件下运行良好,80 d的平均原料产气率达0.305 m3/d.     

生物质废弃物快速热解制取富氢气体的实验研究

采用管式炉对红松锯屑快速热解制取富氢气体进行了实验研究,分析了反应器温度、物料粒径和催化剂对热解产物组成的影响.结果表明高温能加快生物质快速热解进程,减少炭和焦油生成量,利于富氢气体的生成,800℃时气态产物比例可达56.9 wt.%,气态产物中H2体积分数由4.3%(500℃下)上升至17.2%,H2 CO体积分数达68.3%.小粒径能增大热解气态产物的比例,但对气态产物组成的影响很小,这可能与红松锯屑本身质地疏松有关.以与生物质直接混合方式添加的煅烧白云石能使热解产物中H2含量增加,但造成产气过程变缓,炭生成量增多,富氢气体总产量未能得到提高.     

蒽醌化合物的光解动力学及定量结构-性质关系

以高压汞灯为光源, 测定了15 种蒽醌化合物(ATQs)的光解速率常数(k), 讨论了取代基位置、数目及种类对ATQs 光解速率的影响.另外,选取9 种氨基蒽醌, 应用偏最小二乘(PLS)算法, 建立了关于k的定量结构-性质关系(QSPR)模型. 根据该模型, 决定k值大小的主要因素包括:分子生成热、H 原子所带最大正电荷、C 原子所带最大负电荷,以及分子最低未占据轨道与最高占据轨道能量差.     

CDM Project Activities in China＇s Iron and Steel Industry：Current Status,Barriers and Development Strategies

China is now facing huge pressure from both the domestic concern of energy security and the global community's call for emission reduction commitment. As one of the major energy consumers and greenhouse gas emitters, China's iron and steel industry has a huge clean development mechanism (CDM) potential. This article both quantitatively and qualitatively analyzes the current status of CDM project activities in the iron and steel industry in China, including characteristics of approved project types, applicable methodologies, and potential technology fields. From the perspective of project implementation, the article summarizes development barriers such as high investment risk, difficulty in project identification, strict requirements on PPDs, long registration waiting time, and etc. Policy suggestions are also put forwarded to help better promote the development of CDM projects in the iron and steel industry.