Application of an indicator based on taxonomic relatedness of ciliated protozoan assemblages for marine environmental assessment

Introduction  

Ciliated protozoa play important roles in aquatic ecosystems especially regarding their functions in micro-food web and have many advantages in environmental assessment compared with most other eukaryotic organisms. The aims of this study were focused on analyzing the application of an indicator based on taxonomic relatedness of ciliated protozoan assemblages for marine environmental assessment.     

Changes of polyamine levels in roots of Sagittaria sagittifolia L. under copper stress

Introduction

The goal of the present study was to investigate the effects of Cu contamination on the above-mentioned biochemical and physiological parameters in order to explore possible prevention strategies against heavy metal stress.

Materials and methods

Effects of copper (Cu) on the roots of Sagittaria sagittifolia L. were studied after 10 days of treatment at five concentration levels. The accumulation of Cu, the generation rate of O₂ ^·?C, the contents of thiobarbituric acid reactive substances (TBARS) and polyamines, as well as the activities of arginine decarboxylase (ADC) and polyamine oxidase (PAO) in the roots were measured and analyzed.

Results and discussion

It was observed that endogenous Cu content increased in roots of S. sagittifolia L. in a concentration-dependent manner, along with an increased production of O₂ ^·?C. TBARS content increased progressively up to 5 ??mol l^?1 Cu. A constant increase in ADC activity was also observed. The results indicated that lower Cu concentrations (2.5 and 5 ??mol l^?1, respectively) had greater enhancing effect on the contents of free Put and perchloric acid-soluble conjugated (PS-conjugated) putrescine (Put), while Cu treatments at different concentration levels had similar enhancing effect on the content of perchloric acid-insoluble bound Put. In total, Put content in each Cu-treated group was higher than that in the control group. PAO activity was inhibited up to 10 ??mol l^?1 Cu but enhanced at higher Cu concentrations (20 and 40 ??mol l^?1). This explained the initial rise and subsequent decline of the contents of all forms of spermine (Spm), free and PS-conjugated spermidine (Spd). However, with the increase of Cu concentration, total Spm content increased gradually while total Spd content decreased. Our results suggest that Cu is phytotoxic to the roots of S. sagittifolia L. at high concentrations, and that the increased Spm level is not sufficient to resist Cu-induced oxidative damages.     

Arsenic release from arsenic-bearing Fe-Mn binary oxide: effects of E(h) condition

Ferric and manganese binary oxide (FMBO) has been successfully used to remediate arsenic-polluted river, but there still lacks sufficient data to evaluate its effects on environments. The release behaviors of iron (Fe), manganese (Mn), and arsenic (As) in different E_h ranges were investigated for As-bearing FMBO sediment after remediating As-polluted DaSha River by FMBO. Under high E_h range (+550 to +400 mV), slight dissolution of Fe and Mn, which corresponded to 12.2% and 25.6%, and less than 5% of As release were observed in 336 h. Under lower E_h range (+50 to −100 mV), elevated extent of the dissolution of Mn and Fe were observed, which corresponded to as high as 61.3% and 70.1%. Under such conditions, the dissolution rate of Mn was higher than that of Fe. Furthermore, from the established relationship of As release and the dissolution of Fe and Mn, the release of As seemed dominated by the dissolution of Fe. X-ray photoelectron spectroscopy (XPS) analysis demonstrated the release of Fe, Mn, As(III), and As(V) after sodium ascorbate-treatment, and the re-adsorption of As(V), as indicated from the increased binding energy of As 3d from 44.78 to 45.83 eV. Surface element composition analysis indicated significant decrease of Mn from 3.22% to 0.54%, slight increase of Fe from 12.45% to 13.67%, and elevated ratio of As from 0.11% to 0.32% accordingly. The main reactions of Fe and Mn dissolution and the pathways of As release under different E_h ranges were also proposed.     

Chlorination of chlortoluron: kinetics, pathways and chloroform formation

Chlortoluron chlorination is studied in the pH range of 3-10 at 25 ± 1 °C. The chlorination kinetics can be well described by a second-order kinetics model, first-order in chlorine and first-order in chlortoluron. The apparent rate constants were determined and found to be minimum at pH 6, maximum at pH 3 and medium at alkaline conditions. The rate constant of each predominant elementary reactions (i.e., the acid-catalyzed reaction of chlortoluron with HOCl, the reaction of chlortoluron with HOCl and the reaction of chlortoluron with OCl⁻) was calculated as 3.12 (± 0.10) × 10⁷ M⁻² h⁻¹, 3.11 (±0.39) × 10² M⁻¹ h⁻¹ and 3.06 (±0.47) × 10³ M⁻¹ h⁻¹, respectively. The main chlortoluron chlorination by-products were identified by gas chromatography-mass spectrometry (GC-MS) with purge-and-trap pretreatment, ultra-performance liquid chromatography-electrospray ionization-MS and GC-electron capture detector. Six volatile disinfection by-products were identified including chloroform (CF), dichloroacetonitrile, 1,1-dichloropropanone, 1,1,1-trichloropropanone, dichloronitromethane and trichloronitromethane. Degradation pathways of chlortoluron chlorination were then proposed. High concentrations of CF were generated during chlortoluron chlorination, with maximum CF yield at circumneutral pH range in solution.     

Analysis of pesticide residues using the Quick Easy Cheap Effective Rugged and Safe (QuEChERS) pesticide multiresidue method in traditional Chinese medicine by gas chromatography with electron capture detection

The Quick Easy Cheap Effective Rugged and Safe multiresidue method (QuEChERS) has been validated for the extraction of 15 organochlorine pesticides (OCPs) in completely different matrices of traditional Chinese medicine (TCM). The method employed a rapid, simple and cost-effective procedure. The spiking levels for the recovery experiments were 0.1, 0.5 and 2.0 mg kg⁻¹. Mean recoveries mostly ranged between 76.0% and 114.0% (96.0% on average), and relative standard deviations (RSD) were generally below 10% (4.72% on average). Based on these results, the methodology has been proven to be highly efficient and robust and thus suitable for monitoring the MRL compliance of a wide range of commodity. The contamination status of 15 OCPs on 80 different TCMs marketed in China, and a total of 400 samples were also performed using a previously validated method. 15 OCPs were benzene hexachloride (BHC, including α-BHC, β-BHC, γ-BHC, δ-BHC), hexachlorobenzene, heptachlor, heptachlor epoxide, aldrin, p, p′-DDE, p, p′-DDD, o, p′-DDT, p, p′-DDT, mirex, endrin, dieldrin. This study indicates that the proposed method is useful for analyzing OCPs in TCM.     

钛基IrO2-SnO2电极在烟气海水脱硫恢复系统中的应用

采用浸渍-热分解法制备了含IrOx-TiO2中间层的IrO2-SnO2电极,得到的电极具有较高的析氯电催化活性和较强的稳定性,并通过电化学氧化法对Na2SO3海水脱硫模拟液进行处理,考察了电流密度、温度、pH值和电解时间等电解工艺参数对Na2SO3去除率和化学需氧量COD的影响。结果表明,在电流密度为200 mA/cm^2,pH值为3.5,电解440 mg/L的Na2SO3海水脱硫模拟液,15 min时Na2SO3去除率可达96.5%,COD去除率可达82.6%。     

钛基IrO2-SnO2电极在烟气海水脱硫恢复系统中的应用

采用浸渍-热分解法制备了含IrOx-TiO2中间层的IrO2-SnO2电极,得到的电极具有较高的析氯电催化活性和较强的稳定性,并通过电化学氧化法对Na2SO3海水脱硫模拟液进行处理,考察了电流密度、温度、pH值和电解时间等电解工艺参数对Na2SO3去除率和化学需氧量COD的影响.结果表明,在电流密度为200 mA/cm...     

添加不同量的腐殖酸对猪粪堆肥中主要养分变化的影响

腐殖酸是一种可以控制堆肥氮素损失的天然固定剂,通过研究腐殖酸对猪粪堆肥过程中主要养分含量变化的影响,确定了腐殖酸的最佳加入量.结果表明,加入5%含量(占鲜猪粪重)的腐殖酸最有利于发酵反应的进行,能够促进有机质的分解,有效控制氮素损失,可使速效钾含量增加,但对有效磷的转化能力影响不大;与其他处理相比,加入5%含量的腐殖酸...