超临界络合萃取铅的研究进展

本文综述了超临界络合萃取铅的研究进展 ,介绍了几类络合剂 ,以及温度、压力和基质及基质修饰剂等因素对萃取效率的影响。     

手性污染物环境行为的对映体差异性

环境中手性污染物对映体选择性行为的研究历史不长 ,但由于手性化合物对映体生物活性的差异性 ,手性污染物在环境中的对映体选择性行为已愈来愈引起人们的关注。本文对近 10多年来手性污染物的环境行为研究进行全面评述     

农林生物质在含铬废水处理中的应用

农林生物质作为低成本吸附剂在环境污染治理中日益受到重视。综述了农林生物质在含铬废水处理中的应用研究进展，分析了生物质处理含铬废水的机理、影响因素，指出了生物质法处理含铬废水的发展方向。     

Microbial community and biochemistry process in autosulfurotrophic denitrifying biofilm

The 16S rDNA-based molecular technique was applied to analyze the microbial community of autotrophic denitrification bacteria in a biofilm developed on the surface of sulfur particles and then the biochemistry process involved in this biofilm was discussed based on the microbial community analysis. Six key operational taxonomy units were identified, which were all unknown species belonging to a wide range of bacteria from four major subdivisions (alpha, beta, gamma and delta) of the kingdom Proteobacteria and from the kingdom Chlorobia (green sulfur bacteria). One species was chemoautotrophic and related to Thiobacillus denitrificans, two species were photoautotrophic, and three were chemoheterotrophic. Contrary to expectation, T. denitrificans-like bacteria constituted only 32% of the microbial community. As a result of the study, the entire microbiology of the autosulfurotrophic denitrification process as well as the interactions between the different microbial groups in the biofilm may need to be reconsidered.     

Human exposure and health risk of alpha-, beta-, gamma- and delta-hexachlorocyclohexane (HCHs) in Tianjin, China

The dynamic exposures to HCHs of individuals born between the years 1913 and 1993 in Tianjin have been simulated by connecting a fugacity model (IV) with a multimedia exposure model. Ingestion is the most important pathway for human beings to take up HCHs, and concentrations in the human body correlate with body weight changes. Accumulations of HCHs were derived assuming that the degradation in human body behaved linearly. The health risk of exposure to HCHs was measured using cancer risk and loss of life expectancy (LLE), and LLE was modified from its original definition to incorporate a dynamic calculation that takes variances in exposure into account. Monte-Carlo simulations were run to analyze the uncertainties of the model.     

水处理工艺去除藻毒素的效果探讨

探讨了饮用水处理的各工艺过程对藻毒素的去除作用,并根据前期已进行的实验对各工艺的优化组合进行了讨论,认为以气浮代替沉淀,并附之以粉末活性炭吸附预处理可有效地去除藻毒素;对没有条件改造沉淀池的水厂可暂时采用预氯化和粉末活性炭吸附组合的工艺也可达到较好的效果;对生物预处理工艺进行适当的强化,可达到对有机物、藻类、藻毒素等物质的有效去除.     

铁炭法处理高浓度难降解表面活性剂废水的研究

就铁炭法对高浓度难降解拉开粉（阴离子表面活性剂）废水的处理效果进行了接近工业化的动态模型实验研究，结果表明酸化铁炭工艺对橡胶工业拉开粉废水具有显著的去除效果。在Fe：C=2：1，pH=4，停留时间60min，曝气量0．1m^3／h时，拉开粉（BX）和COD的总去除率分别约为80％和45％。     

Ammonia inhibition on thermophilic anaerobic digestion

This study evaluated both chronic and acute toxicity of ammonia in thermophilic anaerobic digestion of synthetic wastewater over a range of acclimation concentrations. The inhibition effects of ammonia, in terms of total ammonia nitrogen (TAN), under various pH values and acclimation conditions on thermophilic aceticlastic methanogens were investigated. Completely mixed thermophilic anaerobic reactors operated at a chemical oxygen demand (COD) loading rate of 4 g/lday and a solid retention time (SRT) of 7 days were subjected to TAN concentrations of 0.40, 1.20, 3.05, 4.92, and 5.77 g/l. The reactor operations presented a case of chronic inhibition and it was observed that TAN concentrations of 4.92 and 5.77 g/l caused a drop in methane production by as much as 39% and 64%, respectively with respect to control. Batch anaerobic toxicity assays (ATA) were also performed to evaluate the acute toxicity effects of TAN and pH on methanogenesis at thermophilic condition. Modeling based on the results of ATA indicated that aceticlastic methanogens acclimated to high concentrations of TAN were less sensitive to increase in TAN and could tolerate wider pH ranges. TAN concentration causing 100% inhibition occurred in the range of 8-13 g/l, depending on acclimation condition and system pH.     

Removal of carbon dioxide by a spray dryer

With the global warming due to greenhouse effects becoming serious, many efforts are carried out to decrease the emissions of CO2 from the combustion of carbonaceous materials. In Taiwan, there are 19 large-scale municipal solid waste incinerators running and their total emission of CO2 is about 16,950 kton y-1. Spray dryer is the most prevailing air pollution control devise for removing acid gas in waste incineration; however, the performance of spray dryer on the removal of CO2 is seldom studied. This study employs a laboratory-scale spray dryer to investigate the removal efficiency of CO2 under different operating conditions. The evaluated parameters include different absorbents mixed with CaOH2, operating temperature, the concentration of absorbent, and the inlet concentration of CO2. Experimental results show that the best removal efficiency of CO2 by a spray dryer is 48% as the absorbent is 10%NaOH+5%CaOH2 and the operating temperature is 150 degrees C. Comparing this result with previous study shows that the performance of spray dryer is better than traditional NaOH wet scrubber. For NaOH+CaOH2 spray dryer, the removal efficiency of CO2 is decreased with the inlet concentration of CO2 increased and the optimum operating temperature is 150 degrees C. Except NaOH+CaOH2, absorbents DEA+CaOH2, TEA+CaOH2, and single CaOH2 are not effective in removing CO2 by a spray dryer.     

Incineration of paper sludge in a prototype vortexing fluidized bed combustor

All experiments were carried out in a prototype vortexing fluidized bed combustor (VFBC). The dimension of the combustion chamber is 0.7 x 1.4 x 2 m, and the freeboard section is 1 m i.d. and 4 m in height. Paper sludge was used as the feeding material. Two types of coal particles were employed as the supplementary fuel. In order to understand the characteristics of the VFBC system for paper sludge incineration, the effect of various operating parameters, such as the primary airflow, excess air ratio, and secondary airflow rates, on temperature distribution, ash elutriation, combustion efficiency, and pollutant emissions were investigated.