Effect of straw retention on carbon footprint under different cropping sequences in Northeast China

Environmental Science and Pollution Research - Inappropriate farm management practices can lead to increased agricultural inputs and changes in atmospheric greenhouse gas (GHG) emissions, impacting...     

制革废水和印染废水的综合毒性评估及鉴别

研究采用成组生物毒性试验(发光菌急性毒性、斑马鱼幼鱼急性毒性,斑马鱼胚胎发育毒性和小球藻急性毒性),结合理化指标,通过毒性单位、平均毒性(average toxicity,Av Tx)、毒性指数(toxic print,Tx Pr)、最敏感的测试(most sensitive test,MST)和潜在毒性效应指数(potential ecotoxic effects probe,PEEP)对不同工艺阶段印染及制革废水进行毒性削减评估.结果表明PEEP能兼顾废水排放量与毒性效应,更为客观地表征了废水综合毒性,PEEP评价结果显示制革废水和印染废水的毒性削减率分别达到36.8%和23.2%.最后,以发光菌作为受试生物,采用毒性鉴别评估(toxicity identification evaluation,TIE)技术,对印染废水进行毒性鉴别.结果表明,印染废水中主要的致毒物质为非极性有机污染,其次为可滤性化合物,然后是重金属、氧化性物质以及挥发性物质.     

氧化镁基生物质炭高效去除水体中磷的特性

利用花生壳为前驱体,在高温限氧条件下,将氧化镁(MgO)负载于生物质炭(BC)表面制备出氧化镁基生物质炭(MgOBC)复合材料.系统研究了MgO-BC对水体中P的吸附特性,并探讨了溶液pH值、接触时间、竞争离子等因素对P的吸附效果的影响.结果表明,P的最佳吸附初始pH为7~9,过酸过碱的环境均不利于P的吸附;P的吸附过程可在540 min内达到平衡,且动力学曲线较好地符合伪一级和伪二级动力学模型,拟合系数可达97.3%和99.0%;当Cl~-、HCO_3~-、NO_3~-等共存离子的量浓度达到P的10倍时,MgO-BC对P仍具有较强的吸附能力;P的吸附过程较好地符合Langmuir等温模型,拟合系数达99%,理论最大吸附容量为138.07 mg·g~(-1),远高于其它未经改性或改性的生物质炭和几种典型P吸附剂的吸附容量.此外,吸附P后的复合材料可作为肥料施入土壤,可有效实现P的再利用.综上所述,该MgO-BC复合材料在净化实际P污染水体中有着广阔的应用前景.     

Effect of lubricant sulfur on the morphology and elemental composition of diesel exhaust particles

This work investigates the effects of lubricant sulfur contents on the morphology, nanostructure, size distribution and elemental composition of diesel exhaust particle on a light-duty diesel engine. Three kinds of lubricant (LS-oil, MS-oil and HS-oil, all of which have different sulfur contents: 0.182%, 0.583% and 1.06%, respectively) were used in this study. The morphologies and nanostructures of exhaust particles were analyzed using high-resolution transmission electron microscopy (TEM). Size distributions of primary particles were determined through advanced image-processing software. Elemental compositions of exhaust particles were obtained through X-ray energy dispersive spectroscopy (EDS). Results show that as lubricant sulfur contents increase, the macroscopic structure of diesel exhaust particles turn from chain-like to a more complex agglomerate. The inner cores of the core-shell structure belonging to these primary particles change little; the shell thickness decreases, and the spacing of carbon layer gradually descends, and amorphous materials that attached onto outer carbon layer of primary particles increase. Size distributions of primary particles present a unimodal and normal distribution, and higher sulfur contents lead to larger size primary particles. The sulfur content in lubricants directly affects the chemical composition in the particles. The content of C (carbon) decreases as sulfur increases in the lubricants, while the contents of O (oxygen), S (sulfur) and trace elements (including S, Si (silicon), Fe (ferrum), P (phosphorus), Ca (calcium), Zn (zinc), Mg (magnesium), Cl (chlorine) and Ni (nickel)) all increase in particles.     

原子吸收法测定海水中铁含量的不确定度评定

为了保证海水中铁元素含量的检测质量,更好地深入了解铁在整个海水体系的生物地球化学中扮演的角色,需科学地评定检测结果的分散性。文章依据《测量不确定度的评定与表示》(JJF1059-1999)的理论,以浙江近海海水为例,评定原子吸收法测定海水中铁含量的不确定度。测得浙江近海样品中铁的浓度为5.2μg/L,扩展不确定度U=0.8μg/L(k=2)。通过对各不确定度分量进行评定发现,利用该方法测定海水中铁含量时,对其合成标准不确定度的主要贡献来自于样品制备过程,尤其是萃取过程。     

紫外消毒对城市污水处理厂耐药菌去除的影响研究

通过选取假单胞杆菌、鲍曼不动杆菌以及芽孢杆菌3种耐药菌作为研究对象,研究紫外光变化对这3种耐药菌的去除效果,得出较好的紫外消毒条件,应用到实际的污水处理厂消毒过程中。结果表明,紫外消毒对3种耐药菌都有很好的灭活效果。     

岩溶地区隧道施工对水环境影响评价指标体系的建立

随着人们环保意识的不断提高,交通隧道施工期对周边水环境的影响也日益受到关注。针对岩溶地区隧道的施工特点建立了隧道施工期对水环境影响的评价指标体系。该体系研究了施工中含污废水排放对地表水体污染以及地下水疏排给隧道周边水资源流失两方面进行评价;指标体系各层指标数量随施工进展与现场情况变化进行增减,以满足施工期不断变化情况对水环境影响大小的准确评估;该指标体系充分考虑到"木桶理论"的原理,明确施工过程中对水环境影响最严重环节,有助于及时采取保护措施。     

β射线法与重量法监测环境空气PM_(2.5)的应用比较

重量法是测量PM_(2.5)的传统手工经典方法,而β射线法加动态加热系统联用光散射法作为自动在线监测技术的常用方法被广泛使用。将5030-SHARP型β射线法加动态加热系统联用光散射法PM_(2.5)自动监测设备监测结果与手工法测量结果进行比对、分析,结果表明:β射线法与重量法监测结果具有一致性,测量结果不存在显著性差异;β射线法与重量法相对偏差值与温度、相对湿度、风速等气象因子的相关性不明显;β射线法与重量法监测结果的差异性与PM_(2.5)质量浓度、季节等条件有关;随着PM_(2.5)质量浓度逐渐升高,β射线法与重量法相对偏差的绝对值|RD|也随之增大,不同季节的|RD|平均值差异较大,春季、冬季的|RD|平均值大于夏季、秋季。     

On the effect of Fe(III) on proliferation of Microcystis aeruginosa at high nitrate and low chlorophyll condition

The impact of Fe concentrations on the growth of Microcystisaeruginosa in aquatic systems under high nitrate and low chlorophyll conditions was studied. The responses of cell density, total and cell chlorophyll-a intracellular Fe content and organic elemental composition of M. aeruginosa to different concentration gradients of Fe(III) in the solutions were analysed. The results showed that the proliferation speeds of M. aeruginosa were: (1) decelerated when the Fe(III) concentration was lower than 50 μg/L in the solutions, (2) promoted and positively related to the increase of Fe(III) concentration from 100 to 500 μg/L in the solutions over the experimental period, and (3) promoted in the early stage but decelerated in later stages by excess adsorption of Fe by cells when the Fe(III) concentration was higher than 500 μg/L in the solutions. The maximum cell density, total and cell chlorophyll-a were all observed at 500 μg Fe(III)/L concentration. The organic elemental composition of M. aeruginosa was also affected by the concentration of Fe(III) in the solutions, and the molecular formula of M. aeruginosa should be expressed as C_7–7.5H₁₄O_0.8–1.3N_3.5–5 according to the functions for different Fe(III) concentrations. Cell carbon and oxygen content appeared to increase slightly, while cell nitrogen content appeared to decrease as Fe(III) concentrations increased from 100 to 500 μg/L in the solutions. This was attributed to the competition of photosynthesis and nitrogen adsorption under varying cell Fe content.     

建筑材料隐含环境影响评估

我国建筑业快速发展,建筑开发使用大量的建筑材料给资源和环境带来严重负荷.以上海市为案例,运用生命周期评价方法,基于北京工业大学和Ecoinvent数据库中的建筑材料生产数据,采用ReCiPe法对上海市建筑物的材料隐含环境影响进行评估,并对未来的环境影响潜值进行预测.结果表明:在上海市居住建筑和非居住建筑所产生的各类环境影响中人类毒性、金属损耗最为突出,约占总环境影响的45%和20%;环境影响主要来源于钢筋和木材的生产,对各类环境影响贡献度分别约为47%、17%;高层居住建筑和非居住建筑中的工厂建筑物化环境影响在各自类型中所占比例最高.按现有趋势发展,2020年上海市居住建筑开发规模和环境影响潜值均将达到2014年的1.52倍,非居住建筑则可达到2014年的1.14倍.针对上海市建筑材料环境影响分析结果,为有效减轻上海市建筑物的环境影响,需重点关注钢筋、铝材、木材以及混凝土的生产,识别生产过程中污染物转移环节进而改进工序;在设计阶段考虑选择环境影响负荷低的绿色建材,如混凝土砌块、高性能混凝土等,从而降低环境影响;同时,应重点关注隐含环境负荷高的高层居住和工厂建筑类建筑,通过降低建材使用量等方案降低环境影响.