Influence of oxygen flow rate and compost addition on reduction of organic matter in aerated waste layer containing mainly incineration residue

Landfilling municipal solid waste incineration (MSWI) residue alkalizes the waste layer, causing a subsequent decrease in microbial activity and a delay in the decomposition of organic matter. In this study, efficiencies of neutralization of the leachate and organic matter decomposition in the waste layer in a column filled with MSWI residue using aeration and compost addition were evaluated.Total organic carbon (TOC) reduction in the waste layer is large at high oxygen flow rate (OFR). To effectively accelerate TOC reduction in the waste layer to which compost was added, a high OFR exceeding that by natural ventilation was required. At day 65, the pH of the leachate when OFR was above 102mol-O2/(day·m3) was lower than that when OFR was below 101mol-O2/(day·m3). At the same OFR, the pH of waste sample was lower than that of waste sample with compost. Although leachate neutralization could be affected by compost addition, TOC reduction in the waste layer became rather small. It is possible that humic substances in compost prevent the decomposition of TOC in MSWI residue.     

Determinants of eco-efficiency in the Chinese industrial sector

This study measures productive inefficiency within the context of multi-environmental pollution (eco-efficiency) in the Chinese industrial sector. The weighted Russell directional distance model is applied to measure eco-efficiency using production technology. The objective is to clarify how external factors affect eco-efficiency. The major findings are that both foreign direct investment and investment for pollution abatement improve eco-efficiency as measured by air pollutant substances. A levy system for wastewater discharge improves eco-efficiency as measured by wastewater pollutant substances. However, an air pollutant levy does not significantly affect eco-efficiency as measured by air pollutants.     

Simulation study of phytoplankton photosynthesis and growth in the Fraser River estuary

Phytoplankton photosynthesis was estimated by a simulation model of the Fraser River estuary (Canada). For this estimation, two kinds of information were considered; (1) the photosynthetic response of phytoplankton taken from the estuary to each environmental factor; (2) actual measurement of changes in each environmental factor in the estuary. As the major limiting factors, light intensity, temperature, and nitrate were taken into account. Variations in these parameters were combined together under the assumption of the law of the minimum; that is, only one of the environmental factors was considered to limit photosynthesis at any given time and place. From the results obtained, it could be shown which environmental factors actually limited phytoplankton photosynthesis in the Fraser River estuary at different times of the year and at different depths.     

Female sex pheromone and male behavioral responses of the bombycid moth <Emphasis Type="Italic">Trilocha varians</Emphasis>: comparison with those of the domesticated silkmoth <Emphasis Type="Italic">Bombyx mori</Emphasis>

Analysis of female sex pheromone components and subsequent field trap experiments demonstrated that the bombycid moth Trilocha varians uses a mixture of (E,Z)-10,12-hexadecadienal (bombykal) and (E,Z)-10,12-hexadecadienyl acetate (bombykyl acetate) as a sex pheromone. Both of these components are derivatives of (E,Z)-10,12-hexadecadienol (bombykol), the sex pheromone of the domesticated silkmoth Bombyx mori. This finding prompted us to compare the antennal and behavioral responses of T. varians and B. mori to bombykol, bombykal, and bombykyl acetate in detail. The antennae of T. varians males responded to bombykal and bombykyl acetate but not to bombykol, and males were attracted only when lures contained both bombykal and bombykyl acetate. In contrast, the antennae of B. mori males responded to all the three components. Behavioral analysis showed that B. mori males responded to neither bombykal nor bombykyl acetate. Meanwhile, the wing fluttering response of B. mori males to bombykol was strongly inhibited by bombykal and bombykyl acetate, thereby indicating that bombykal and bombykyl acetate act as behavioral antagonists for B. mori males. T. varians would serve as a reference species for B. mori in future investigations into the molecular mechanisms underlying the evolution of sex pheromone communication systems in bombycid moths.     

Degradation of 1,4-dioxane in water with heat- and Fe2+-activated persulfate oxidation

This research investigated the 1,4-dioxane (1,4-D) degradation efficiency and rate during persulfate oxidation at different temperatures, with and without Fe²⁺ addition, also considering the effect of pH and persulfate concentration on the oxidation of 1,4-D. Degradation pathways for 1,4-D have also been proposed based on the decomposition intermediates and by-products. The results indicate that 1,4-D was completely degraded with heat-activated persulfate oxidation within 3–80 h. The kinetics of the 1,4-D degradation process fitted well to a pseudo-first-order reaction model. Temperature was identified as the most important factor influencing the 1,4-D degradation rate during the oxidation process. As the temperature increased from 40 to 60 °C, the degradation rate improved significantly. At 40 °C, the addition of Fe²⁺ also increased the 1,4-D degradation rate. Interestingly, at 50 and 60 °C, the 1,4-D degradation rate decreased slightly with the addition of Fe²⁺. This reduced degradation rate may be attributed to the rapid conversion of Fe²⁺ to Fe³⁺ and the production of an Fe(OH)₃ precipitate which limited the ultimate oxidizing capability of persulfate with Fe²⁺ under higher temperatures. Higher persulfate concentrations led to higher 1,4-D degradation rates, but pH adjustment had no significant effect on the 1,4-D degradation rate. The identification of intermediates and by-products in the aqueous and gas phases showed that acetaldehyde, acetic acid, glycolaldehyde, glycolic acid, carbon dioxide, and hydrogen ion were generated during the persulfate oxidation process. A carbon balance analysis showed that 96 and 93 % of the carbon from the 1,4-D degradation were recovered as by-products with and without Fe²⁺ addition, respectively. Overall, persulfate oxidation of 1,4-D is promising as an economical and highly efficient technology for treatment of 1,4-D-contaminated water.     

Occurrence of perfluorinated carboxylic acids (PFCAs) in personal care products and compounding agents

Perfluorinated carboxylic acids (PFCAs), including perfluorooctanoic acid (PFOA), are persistent organic pollutants that pose human health risks. However, sources of contamination and exposure pathways of PFCAs have not been explored. In this study, PFCA concentrations were quantified in personal care products. Among 24 samples that listed fluorinated compounds, such as polyfluoroalkyl phosphate esters (PAPs), in their international nomenclature of cosmetic ingredients (INCI) labels, 21contained PFCAs (13 of 15 cosmetic samples, and 8 of 9 sunscreen samples). The concentrations of total PFCAs ranged from not detected to 5.9 μg g⁻¹ for cosmetics and from not detected to 19 μg g⁻¹ for sunscreens. We also investigated components of PFCAs in cosmetics and sunscreens. Commercially available compounding agents, mica and talc, which were treated with PAPs were analyzed and high concentrations of PFCAs were detected (total PFCAs 2.5 μg g⁻¹ for talc treated with PAPs, 35.0 μg g⁻¹ for mica treated with PAPs). To the best of our knowledge, this is the first report on contamination of end consumer products containing PAPs with high concentrations of PFCAs.     

Performance evaluation of intermediate cover soil barrier for removal of heavy metals in landfill leachate

This pilot-scale study evaluated the use of intermediate cover soil barriers for removing heavy metals in leachate generated from test cells for co-disposed fly ash from municipal solid waste incinerators, ash melting plants, and shredder residue. Cover soil barriers were mixtures of Andisol (volcanic ash soil), waste iron powder, (grinder dust waste from iron foundries), and slag fragments. The cover soil barriers were installed in the test cells' bottom layer. Sorption/desorption is an important process in cover soil bottom barrier for removal of heavy metals in landfill leachate. Salt concentrations such as those of Na, K, and Ca in leachate were extremely high (often greater than 30 gL(-1)) because of high salt content in fly ash from ash melting plants. Concentrations of all heavy metals (nickel, manganese, copper, zinc, lead, and cadmium) in test cell leachates with a cover soil barrier were lower than those of the test cell without a cover soil barrier and were mostly below the discharge limit, probably because of dilution caused by the amount of leachate and heavy metal removal by the cover soil barrier. The cover soil barriers' heavy metal removal efficiency was calculated. About 50% of copper, nickel, and manganese were removed. About 20% of the zinc and boron were removed, but lead and cadmium were removed only slightly. Based on results of calculation of the Langelier saturation index and analyses of core samples, the reactivity of the cover soil barrier apparently decreases because of calcium carbonate precipitation on the cover soil barriers' surfaces.     

Causes of accidents by soy sauce squeezing residue and fish meal

Recently, a demand for the reuse, recycling and reduction of waste has arisen. In the food industry, efforts are being made to recycle the waste produced and use resources more efficiently. However, some industrial food waste or recycled waste materials generate heat as a result of fermentation and oxidation, which leads to an increase in temperature during storage and transport, ultimately resulting in spontaneous ignition. In this study, we examined the fermentation and heat generation by soy sauce squeezing residue (SSSR) produced during the brewing of soy sauce and by the fish meal produced during the processing of fish residue. The objective of this study was to investigate the causes of fires using various heat analysis methods and to understand the processes of fermentation and oxidation of food industry waste that lead to spontaneous ignition.     

Functional effects of the hadal sea cucumber <Emphasis Type="Italic">Elpidia atakama</Emphasis> (Echinodermata: Holothuroidea,Elasipodida) reflect small-scale patterns of resource availability

Holothuroidea represent the dominant benthic megafauna in hadal trenches (~6,000–11,000 m), but little is known about their behaviour and functional role at such depths. Using a time-lapse camera at 8,074 m in the Peru–Chile Trench (SE Pacific Ocean), we provide the first in situ observations of locomotory activity for the elasipodid holothurian Elpidia atakama Belyaev in Shirshov Inst Oceanol 92:326–367, (1971). Time-lapse sequences reveal ‘run and mill’ behaviour whereby bouts of feeding activity are interspersed by periods of locomotion. Over the total observation period (20 h 25 min), we observed a mean (±SD) locomotion speed of 7.0 ± 5.7 BL h⁻¹, but this increased to 10.9 ± 7.2 BL h⁻¹ during active relocation and reduced to 4.8 ± 2.9 BL h⁻¹ during feeding. These observations show E. atakama translocates and processes sediment at rates comparable to shallower species despite extreme hydrostatic pressure and remoteness from surface-derived food.     

DETERMINING THE ACCURACY OF COHERENT OPTICAL IDENTIFICATION OF DIATOMS1

ABSTRACT: The discriminating capability of a coherent optical processor in identifying diatom species was tested using 25 species selected by diatom taxonomists. A 25 × 25 matrix of auto- and cross-correlations was used for this purpose. In no case did cross-correlation signals approach the intensity of auto-correlations indicating that false identifications were extremely improbable. Shape and height differences of the cross-correlation signals can be attributed to variations in diatom shapes, sizes, and cell wall morphology.