Effects of productivity on biodiversity in forest ecosystems across the United States and China

In the global campaign against biodiversity loss in forest ecosystems, land managers need to know the status of forest biodiversity, but practical guidelines for conserving biodiversity in forest management are lacking. A major obstacle is the incomplete understanding of the relationship between site primary productivity and plant diversity, due to insufficient ecosystem‐wide data, especially for taxonomically and structurally diverse forest ecosystems. We investigated the effects of site productivity (the site's inherent capacity to grow timber) on tree species richness across 19 types of forest ecosystems in North America and China through 3 ground‐sourced forest inventory data sets (U.S. Forest Inventory and Analysis, Cooperative Alaska Forest Inventory, and Chinese Forest Management Planning Inventory). All forest types conformed to a consistent and highly significant (P < 0.001) hump‐shaped unimodal relationship, of which the generalized coefficients of determination averaged 20.5% over all the forest types. That is, tree species richness first increased as productivity increased at a progressively slower rate, and, after reaching a maximum, richness started to decline. Our consistent findings suggest that forests of high productivity would sustain few species because they consist mostly of flat homogeneous areas lacking an environmental gradient along which a diversity of species with different habitats can coexist. The consistency of the productivity–biodiversity relationship among the 3 data sets we examined makes it possible to quantify the expected tree species richness that a forest stand is capable of sustaining, and a comparison between the actual species richness and the sustainable values can be useful in prioritizing conservation efforts.     

The Trump administration’s decision to withdraw the United States from the Paris Climate Agreement

<正>After years of complex and challenging negotiations,197countries reached a landmark climate agreement during the 2015 United Nations Framework Convention on Climate Change summit in Paris(the 21st Conference of the Parties(COP21)).Under the Paris Agreement,countries announced actions they plan to take to mitigate their greenhouse gas emissions known as Intended Nationally Determined Contributions.Although there is     

云技术在石油行业应急管理中的思考

面对石油行业突发事件全过程,利用大数据云处理技术,以应急管理4阶段为划分标准,将云技术运用到应急管理四大阶段当中,为解决缺乏合理的信息技术手段、应急信息搜集不全面、数据挖掘分析技术落后、决策支持模型构建不完善等落后的临时性应急管理模式,找寻到一种高效应急管理模式的新方向。     

河南省在用柴油车加载减速烟度排放限值研究

随着车辆技术进步和燃油品质提升,河南省在用柴油车加载减速污染物现行排放限值已不能对高排放车辆进行有效监控。依据《确定压燃式发动机在用汽车加载减速法排气烟度排放限值的原则和方法》(HJ/T 241—2005),采用相对光吸收系数与累积频率法,对9 458份在用柴油车检测数据进行统计分析,提出符合河南省的在用柴油车排放限值。建议河南省在用国三、国四、国五轻型柴油车尾气光吸收系数限值分别为0.98、0.89、0.76m~(-1),而相应重型柴油车尾气光吸收系数限值分别为0.66、0.62、0.48m~(-1);依据该限值,河南省在用柴油车的年检合格率控制在82.6%,高排放柴油车比例为17.4%,符合HJ/T 241—2005的要求。     

机械活化煤气化细渣资源化利用及残碳燃烧反应动力学探究

随着我国煤气化技术的快速发展，气化渣的产生和排放量逐年增加.煤气化细渣的大量堆存，给当地的环境保护造成了巨大的压力，已经成为限制煤化工产业基地可持续发展急需解决的重大问题.本文针对气化细渣中残碳反应活性低和转化难度大的问题，研究了机械活化法对气化渣残碳反应动力学的影响.采用Coats-Redfern法分析了机械活化对残碳反应活化能的作用规律.结果表明，机械活化8 h，残碳燃烧反应活性显著提高，650℃下的活化能由63.2 k J·mol^-1降到28.4 k J·mol^-1.不添加其他化学试剂，1000℃烧制高强度轻质陶粒，其堆积密度为0.867 g·cm^-3，筒压强度为7.67 MPa.相关研究可以为我国气化细渣的资源化利用提供一定的数据和技术基础.     

长庆油田4731B型非金属集输管道老化特性实验研究

为推广非金属复合管在油田集输油领域的应用，明确其在集输环境中的老化特性是关键问题。基于集输油现场的工程条件，针对长庆油田试用的4731B型钢丝缠绕增强复合管，以采出原油、采出水为实验介质，通过挂片实验、水压爆破实验，借助电镜扫描、拉伸测试对复合管内衬层老化行为、拉伸性能以及复合管极限承压与老化特性进行研究。结果表明:采出原油与采出水均可渗透扩散进入内衬层内部，还会发生局部深入渗透；采出原油、采出水的局部渗透速率分别可达3.4，10.6 mm/a；在某些工况下，内衬层表面产生裂纹；短时间（168 h）内的介质渗透甚至裂纹对其机械性能影响较小，而光氧老化影响显著；现场服役813 d后，复合管极限承压下降2.79%，表明复合管承压性能稳定。     

氢安全研究现状及面临的挑战

氢能具有储运便捷、来源多样、洁净环保等突出优点,许多国家把发展氢能作为重要的能源战略。氢安全是氢能大规模商业化应用的重要保障。在分析国内外氢安全领域近年来最新研究进展的基础上,依次从氢泄漏与扩散、氢燃烧与爆炸、氢与金属材料相容性及氢风险评价等方面,系统总结了国内外氢安全研究面临的挑战,并对我国氢安全的发展提出了建议。     

准静力拉格朗日元与离散元耦合方法及应用——以常村煤矿S6-7工作面为例

为了探究采动条件下采场上覆岩层的变形-开裂-运动过程,利用自主开发的适于准静力计算的拉格朗日元与离散元耦合的连续-非连续方法,针对常村煤矿S6-7工作面开展研究.结果表明,1)随工作面推进距离增加,首先,直接顶出现裂缝;然后,采场上覆岩层发生一定程度的弯曲变形、下沉和离层;之后,直接顶垮落,其上岩层破断,并发生明显的弯曲变形、下沉和离层,采空区局部闭合.此后,上述过程循环往复.2)将工作面煤壁前方和开切眼后方上覆岩层最大主应力大于0的最大范围定义为采动影响范围,通过分析悬露岩层长度和弯矩的变化解释了上述两部分采动影响范围的演化规律.3)通过分析工作面煤壁前方煤层支承压力峰值的变化解释了该部分煤层破碎区尺寸的演化规律.     

Nitrogen evolution during the co-combustion of hydrothermally treated municipal solid waste and coal in a bubbling fluidized bed

Nitrogen evolution was studied during the co-combustion of hydrothermally treated municipal solid wastes (HT MSW) and coal in a bubbling fluidized bed (BFB). HT MSW blending ratios as 10%, 20% and 30% (wt.%) were selected and tested at 700, 800, 900 °C. Emissions of NO and N₂O from blends were measured and compared with the results of mono-combustion trials. Moreover, concentrations of precursors like NH₃ and HCN were also quantified. The results are summarized as follows: NO emissions were predominant in all the cases, which rose with increasing temperature. The blending of HT MSW contributed to the NO reduction. N₂O emissions decreased with temperature rising and the blending of HT MSW also presented positive effects. At 30% HT MSW addition, both NO and N₂O emissions showed the lowest values (391.85 ppm and 55.33 ppm, respectively at 900 °C). For the precursors, more HCN was detected than NH₃ and both played important roles on the gas side nitrogen evolution.     

308 nm光作用下α-Fe2O3表面HNO3的光解

采用紫外可见光谱(UV-Vis)、傅立叶变换红外光谱(FTIR)及离子色谱(IC)技术对HNO3在α-Fe2O3表面暗反应和308nm下光解反应进行了研究.考察了时间、HNO3浓度、相对湿度(RH)等条件对反应的影响.结果表明,随着HNO3浓度、光照时间的增加,HNO3在气相与α-Fe2O3表面光解产物浓度均呈指数增加;HNO3在α-Fe2O3表面光解产生的NO2、NO分别为气相产生的3.27及3.87倍,而无论气相还是表面光解的NO2浓度均约为NO的2倍.随着RH的增加,HNO3光解产生的HONO的浓度随之呈指数增大,其产率从RH 20%时的0.023增加到90%时的0.087.α-Fe2O3的表面效应在HNO3的表面光解反应中起主导作用.