微波萃取技术在分析土壤中有机污染物的应用

介绍了微波萃取技术及其使用的试剂、设备和条件,对微波萃取在分析土壤中有机污染物的应用予以综述,阐述了微波萃取技术是分析土壤中有机污染物的好方法。     

神经网络与模拟退火算法结合的锅炉低NOx燃烧优化

对某600MW燃煤电站锅炉进行了多工况热态NO_x排放特性测量,在利用多层前向神经网络对该锅炉的NO_x排放特性进行建模的基础上,将神经网络模型与模拟退火全局优化算法相结合,实现了锅炉的低NO_x燃烧的优化,计算得到可获得低NO_x排放浓度的具体燃烧配风方案.文中对2种不同退火参数的模拟退火算法进行了比较,结果说明采用T₀=50K,α=0.6的参数可以获得较好的寻优效果.本文研究结果为实现大型电站锅炉低NO_x燃烧控制的在线优化技术打下了基础.     

撇油器的原理及性能

溢油回收装置的有效使用是降低和消除溢油污染的重要手段。比较了撇油器的各种原理、性能及操作条件。     

某二高线通风改造实践研究

根据自然通风原理,对某二高线厂房进行了通风改造,主要从以下三方面人手：在进风窗下增设百页进风口、用通风栅栏代替封闭平台以及扩大天窗喉口。改造前后气流及温度分布的实测结果表明,改造后工作区的热环境得到了较大的改善,气流分布均匀,温度下降明显,提高了人体舒适性。     

Enhanced anaerobic treatment of CSTR-digested effluent from chicken manure: The effect of ammonia inhibition

The effect of ammonia inhibition was evaluated during the enhanced anaerobic treatment of digested effluent from a 700 m³ chicken-manure continuous stirred tank reactor (CSTR). A 12.3 L internal circulation (IC) reactor inoculated with an anaerobic granular sludge and operated at 35 ± 1 °C was employed for the investigation. With a corresponding organic loading rate of 1.5-3.5 kg-COD/m³ d over a hydraulic retention time of 1.5 d, a maximum volumetric biogas production rate of 1.2 m³/m³ d and TCOD (total COD) removal efficiency ranging from 70% to 80% was achieved. However, the continual increase in the influent TAN content led to ammonia inhibition in the methanogenesis system. The SCOD/TAN (soluble COD/total ammonia nitrogen) ratio was presented to be the key controlling factor for the anaerobic treatment of semi-digested chicken manure, and further validation through shock loading and ammonia inhibition experiments was conducted. The threshold value of the SCOD/TAN ratio was determined to be 2.4 (corresponding to a TAN of 1250 mg/L) at an influent pH of 8.5-9.     

TiO2介孔球的合成及其对双酚A的光催化降解

以不同的含钛化合物作为原料,在无模板条件下经一步溶剂热法合成了两种TiO2介孔球——TiO2-1和TiO2-2。对两种TiO2介孔球的形貌进行了表征,结果表明:TiO2-1和TiO2-2粒径分别为5.7 nm和8.0 nm;比表面积分别为159.4 m2/g和128.3 m2/g;孔径约为4.0 nm和5.0 nm。采用P25型TiO2、TiO2-1和TiO2-2对双酚A溶液进行光催化降解反应。在催化剂加入量为0.5 mg/L的条件下降解60 min,双酚A去除率分别为76.3%,99.7%,98.5%。TiO2-1和TiO2-2的光催化效果优于P25型TiO2,且TiO2-1的光催化效果更好。     

絮凝—γ射线辐照技术处理印染废水

采用絮凝—γ射线辐照技术处理印染废水,研究了最佳絮凝条件以及吸收剂量率、吸收剂量、废水pH和H2O2浓度对废水辐照处理效果的影响.实验结果表明:采用絮凝和辐照技术联用对印染废水的处理效果明显优于两个方法单独使用的效果;辐照可以显著降低废水中COD、TOC、TC和苯胺类物质的含量,并提高废水的可生化性;吸收剂量率对废水处理效果影响不大;随废水中H2O2浓度增加,COD、TOC、TIC及苯胺类含量均有所下降.     

炭催化剂吸附剂标准物质的研制

本文介绍了炭催化剂吸附剂标准物质的研制过程。对标准物质的制备技术、均匀性检验、稳定性考察及定值和不确定度进行了逐项分析。采用活性炭浸渍、煅烧技术制得炭催化剂吸附剂标准物质。试验结果表明,该标准物质定值结果准确,均匀性、稳定性良好。铜含量的标准值为11．06％,扩展不确定度为0．13％。     

内部装修的消防安全隐患及对策

随着改革开放和市场经济的不断发展,人们生活质量的不断提高,对于建筑内部装修和布置要求也越来越高档、豪华、舒适,尤其是一些歌舞厅、KTV包厢、桑拿浴室、网吧等公共娱乐场所以及宾馆、饭店、大型商场等公共聚集场所和不在少数的居民家庭,为了减轻结构自重,方便建筑内空间的合理划分和追求室内装饰时尚、品味,忽视消防安全,在建筑中大量使用易燃、可燃高分子材料,并大量使用合成及塑料制作的家具.……     

Sb release characteristics of the solid waste produced in antimony mining smelting process

Sb release characteristics of blast furnace slag, mining waste rock and tailing sand were investigated in static immersion and dynamic leaching test. These three kinds of waste samples were collected from the antimony mine in Lengshuijiang, China, produced in mining smelting process. Effects of solid/liquid ratio, sample size and pH of leaching solution on Sb release characteristics were inspected based on the analysis of scanning electron microscope, pH and EC of leachate. The optimal parameters for Sb leaching of each sample were analyzed. For blast furnace slag and mining waste rock, Sb release contents increased along with the decline of solid/liquid ratio. The maximum accumulative release contents were 42.13, 34.26 mg/kg at the solid/liquid ratio of 1:20. While Sb release content for tailing sand decreased first and then increased with the reduction of solid/liquid ratio. When the solid/liquid ratio was 1:5, the accumulative Sb release content reached the most (24.30 mg/kg). Sb release content of mining waste rock increased with the drop of leaching solution pH, with the highest accumulative release content of 26.01 mg/kg at pH 2.0. Sb release contents of blast furnace slag and tailing sand showed positive correlation with the variation of leaching solution pH. The maximum accumulative release contents of these two samples were 215.91 and 147.83 mg/kg, respectively, when leaching solution pH was 7.0. In summary, Sb release capacity of the three samples in descending order was tailing sand, blast furnace slag and mining waste rock. pH and EC of the leachate in dynamic test varied independently with the initial pH of leaching solution while showing close relationship with mineral hydrolysis in the waste.