Use of multitracers for the study of water mixing in the Paraíba do Sul River estuary

Multitracers were used to study water mixing in the Paraíba do Sul River estuary region in August 2007 (dry season) and March 2008 (rainy season) and to evaluate the reach of the river plume in the direction of the open ocean. Two sampling campaigns were carried out, each in a different season. Based on these results, it was possible to conclude that the multitracers used in this study (salinity, Si, Ba and U, as well as the radium isotopes ²²³Ra, ²²⁴Ra, ²²⁶Ra and ²²⁸Ra) presented satisfactory results toward defining the plume reach and determining the residence time and water-mixing processes in the estuary. A strong correlation was observed between tracers and the distance to the coast. During the low river water discharge period, the riverine water took about 10 days to reach open ocean waters (salinity ∼ 35). During the rainy period this value decreased to 6 days. Based on the radium results, it was possible to calculate diffusion coefficients (K_h) of 23 km² d⁻¹ and 38 km² d⁻¹ for ²²⁴Ra and ²²³Ra, respectively, during the dry season (winter). Values of 65 km² d⁻¹ and 68 km² d⁻¹ for ²²³Ra and ²²⁴Ra, respectively, were found for the rainy period (summer).     

Decreased PCDD/F formation when co-firing a waste fuel and biomass in a CFB boiler by addition of sulphates or municipal sewage sludge

Polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) are formed during waste incineration and in waste-to-energy boilers. Incomplete combustion, too short residence times at low combustion temperatures (<700 °C), incineration of electronic waste and plastic waste containing chlorine are all factors influencing the formation of PCDD/Fs in boilers. The impact of chlorine and catalysing metals (such as copper and iron) in the fuel on PCDD/F formation was studied in a 12 MW_th circulating fluidised bed (CFB) boiler. The PCDD/F concentrations in the raw gas after the convection pass of the boiler and in the fly ashes were compared. The fuel types were a so-called clean biomass with low content of chlorine, biomass with enhanced content of chlorine from supply of PVC, and solid recovered fuel (SRF) which is a waste fuel containing higher concentrations of both chlorine, and catalysing metals. The PCDD/F formation increased for the biomass with enhanced chlorine content and it was significantly reduced in the raw gas as well as in the fly ashes by injection of ammonium sulphate. A link, the alkali chloride track, is demonstrated between the level of alkali chlorides in the gas phase, the chlorine content in the deposits in the convection pass and finally the PCDD/F formation. The formation of PCDD/Fs was also significantly reduced during co-combustion of SRF with municipal sewage sludge (MSS) compared to when SRF was fired without MSS as additional fuel.     

Size-assortative pairing across three developmental stages in the Zeus bug, Phoreticovelia disparata

The mechanisms underlying size-assortative pairing have received considerable attention. Typically, pairing is assumed to occur at, or just prior to, the adult phase of the life cycle. However, in many invertebrates, males commence associations with juvenile females who are more than a single moult away from sexual maturity. These species are ideal to explore the importance of reproductive and survival benefits as mechanisms driving size-assortative pairing. In the Zeus bug, Phoreticovelia disparata, adult males are found riding on juvenile (fourth and fifth instar) and adult females—a behaviour that is costly for females but has survival benefits for males. Using a combination of field collections and laboratory manipulations, we show that pairing is size-assortative both within and between female age classes and that riding males are smaller than non-riding males. In a series of mating trials, we revealed that males attempt to ride any female but that their riding success is dependent on female age. We also provide the first direct evidence of female resistance to male riding attempts in P. disparata. We propose that size-assortative pairing arises through adaptations that have evolved to minimise the potential costs of sexual conflict. We suggest that the selective pressure on males to maximise survival benefits is sufficiently high that it outweighs the reproductive benefits of discriminating against fourth instar females. Finally, given that female resistance is under direct selection in juvenile females, it is likely to be the main form of selective pressure for adult females.     

Multicriteria Decision Aid in Supporting Decisions Related to Groundwater Protection

In the recent decades, there have been frequent conflicts between groundwater resources and environmentally hazardous activities. An example is the construction of the new highway through the important glaciofluvial esker aquifer Nybroåsen, which passes the protection zone of the water supply for the Kalmar municipality, in the southeastern part of Sweden. The decision to build the new road through this important aquifer has been strongly questioned by the municipality and the public because the value of the water resources in Nybroåsen was not taken into consideration during the first phase of the decision-making process. Multicriteria decision aid (MCDA) is applied as a tool to structure and analyze the four road alternatives proposed in the environmental impact assessment for the above conflict. The alternatives, including the existing road, are in conflict with water resources, agriculture, natural, and cultural values. The impacts on the water resources have been predicted by a two-dimensional physically based time-variant flow and solute groundwater model, which has been calibrated and evaluated. The MCDA illustrates how it can be used to identify (1) actors and their concerns, (2) ranking of alternative road scenarios according to actors preferences, and (3) coalition groups of actors, i.e., groups that have similar views with regard to the road alternatives. The analysis shows that the two best compromise solutions obtained in the MCDA were unacceptable by the strongest coalition group, showing that either the family of criteria was not well chosen or new alternatives should have been developed.     

Monitoring and measurement of microalgae using the first derivative of absorbance and comparison with chlorophyll extraction method

Monitoring of microalgae in water supplies and industrial applications are becoming increasingly important, yet there are few options available that are simple and accurate, and can provide real-time information. The present work illustrates a new method to determine the concentration of microalgae in water and wastewater using spectrophotometry and the first derivative of absorbance. Chlorella vulgaris was used as an indicator microalga, spiked in water samples representing a range of water qualities (distilled water, surface water, and wastewater), and correlations among C. vulgaris concentrations, absorbance, and the first derivative of absorbance measurements were investigated. In addition, detection limits were established and sensitivity analyses were carried out to determine the lowest C. vulgaris concentrations that can be confidently measured in different water matrices. Finally, the study compared the performance and detection limits of the spectrophotometry-based methods with the well-accepted chlorophyll extraction method. A strong linear relationship (R²?>?0.97) was found between C. vulgaris concentration and absorbance at 695 nm. Using the first derivative of absorbance improved C. vulgaris detection limits by reducing the effects of the background noise and interferences from other substances. The detection limits established using the first derivative method were 0.47, 0.56, and 1.96 mg TVS/L in distilled water, surface water, and wastewater, respectively. In comparison, the detection limits of the chlorophyll extraction method were found to be 19.6, 38.6, and 48.3 mg TVS/L in the same water matrices. These results indicate that first derivative of absorbance can be successfully used for monitoring of microalgae in surface waters and environmental samples as well as in bioreactors used for microalgae cultivation in industrial applications.     

Double genetically modified symbiotic system for improved Cu phytostabilization in legume roots

Environmental Science and Pollution Research - Excess copper (Cu) in soils has deleterious effects on plant growth and can pose a risk to human health. In the last decade, legume-rhizobium...     

Influence of the recycled material percentage on the rheological behaviour of HDPE for injection moulding process

The amount of polymer material wasted during thermoplastic injection moulding is very high. It comes from both the feed system of the part, and parts necessary to set up the mould, as well as the scrap generated along the process due to quality problems. The residues are managed through polymer recycling that allows reuse of the materials in the manufacturing injection process. Recycling mills convert the parts into small pieces that are used as feed material for injection, by mixing the recycled feedstock in different percentages with raw material. This mixture of both raw and recycled material modifies material properties according to the percentage of recycled material introduced. Some of the properties affected by this modification are those related to rheologic behaviour, which strongly conditions the future injection moulding process. This paper analyzes the rheologic behaviour of material with different percentages of recycled material by means of a capillary rheometer, and evaluates the influence of the corresponding viscosity curves obtained on the injection moulding process, where small variations of parameters related to rheological behaviour, such as pressure or clamping force, can be critical to the viability and cost of the parts manufactured by injection moulding.     

Polycyclic aromatic hydrocarbons in clams Ruditapes decussatus (Linnaeus, 1758)

The concentration of sixteen individual polycyclic aromatic hydrocarbons (PAHs) was measured in the clam Ruditapes decussatus whole soft tissues from several places of the Ria Formosa lagoon (Portugal). Total PAH (tPAH) concentrations were higher in the summer (August) and winter (January) than in the other months and the distribution pattern of the individual PAHs was generally dominated by the 4 aromatic ring PAHs, followed by the 2 + 3 aromatic rings PAHs. Benzo[a]anthracene and acenaphthene were the most representative PAHs of the two fractions. Principal components analysis (PCA) revealed that, in the Ria Formosa, seasonal variations are more important than spatial variations, due to changes in PAH source. These sources ranged from petrogenic to pyrolytic or a mixture of both. The origin of clam PAHs was also assessed by partial least squares (PLS) analysis using nineteen different PAH signatures, taken from the literature. It was possible to identify boat traffic, especially in the summer, as one of the most relevant PAH sources to the Ria Formosa. The influence of boat traffic was revealed by several signatures including diesel soot, oil and weathered oil and a mixture of different individual PAHs usually found in harbour sediments. Other relevant sources included combustion of organic matter such as forest fires and diverse domestic activities, occurring mainly in the summer. Most of the clams were considered safe for human consumption, except for some point samples, which presented unusually high PAH concentrations, suggesting the need for a regular survey of PAHs in clam tissues.