Kinetics of aerobic and anaerobic biomineralization of atrazine in surface and subsurface agricultural soils in Ohio

The purpose of this study was to assess atrazine mineralization in surface and subsurface samples retrieved from vertical cores of agricultural soils from two farm sites in Ohio. The Defiance site (NW-Ohio) was on soybean-corn rotation and Piketon (S-Ohio) was on continuous corn cultivation. Both sites had a history of atrazine application for at least a couple of decades. The clay fraction increased at the Defiance site and the organic matter and total N content decreased with depth at both sites. Mineralization of atrazine was assessed by measurement of ¹⁴CO₂ during incubation of soil samples with [U-ring-¹⁴C]-atrazine. Abiotic mineralization was negligible in all soil samples. Aerobic mineralization rate constants declined and the corresponding half-lives increased with depth at the Defiance site. Anaerobic mineralization (supplemented with nitrate) was mostly below the detection at the Defiance site. In Piketon samples, the kinetic parameters of aerobic and anaerobic biomineralization of atrazine displayed considerable scatter among replicate cores and duplicate biometers. In general, this study concludes that data especially for anaerobic biomineralization of atrazine can be more variable as compared to aerobic conditions and cannot be extrapolated from one agricultural site to another.     

Duo-molecularly imprinted polymer-coated magnetic particles for class-selective removal of endocrine-disrupting compounds from aqueous environment

The removal of steroid and phenolic endocrine-disrupting compounds (EDCs) from an aqueous environment was investigated using magnetic particles encapsulated by a duo-molecularly imprinted polymer (duo-MIP). The effect of environmental variables on the binding efficiency was studied. Experimental results showed that the amount of EDCs adsorbed was neither affected by up to 10.0 mM NaCl nor significantly interfered by up to 10.0 mg/L humic acid. Negligible influence was observed from pH 3.3 to pH 6.8, but a decrease started at pH 9. Freundlich isotherm parameters indicated binding capacities in the order of DES?>?E2?～?E1?>?BPA. The applicability of class-selective removal was verified using river water samples spiked with these EDCs at 10 μg/L; the binding efficiencies were 90, 90, 88, and 98 % for estrone (E1), 17β-estradiol (E2), bisphenol A (BPA), and diethylstilbestrol (DES), respectively. A reuse investigation verified constant binding capacities exhibiting <2 % reduction after seven cycles of regeneration.     

Seasonal atmospheric deposition variations of polychlorinated biphenyls (PCBs) and comparison of some deposition sampling techniques

Introduction  

Ambient air and bulk deposition samples were collected between June 2008 and June 2009. Eighty-three polychlorinated biphenyl (PCB) congeners were targeted in the samples.     

Nanoflower synthesis,characterization and analytical applications: a review

Environmental Chemistry Letters - The occurrence of contaminants in the environment requires very sensitive analytical techniques for their determination. For that, analytical techniques have been...     

Synthesis of Ion-Imprinted Alginate Based Beads: Selective Adsorption Behavior of Nickel (II) Ions

Ni(II) imprinted and non-imprinted bioadsorbent alginate beads were prepared, and utilized in the selective adsorption of Ni(II) ions. The optimum adsorption capacity were 6.00 mmol g^?1 at 500 ppm initial metal ion concentration at pH 7 for Ni(II) imprinted alginate beads (IIP). The equilibrium data were applied to Langmuir and Freundlich adsorption isotherms, and it fitted both isotherm models. Thermodynamic parameters showed favorable and endothermic nature of adsorption. Ni(II) imprinted bead showed the strong ability to selective adsorption from Cu(II), Co(II) and Zn(II) ions. In conclusion, Ni(II) ion imprinted alginate beads could be used repeatedly without any significant reduce of adsorption capacity.     

Atmospheric ambient trace element concentrations of PM10 at urban and sub-urban sites: source apportionment and health risk estimation

In this study, PM₁₀ concentrations and elemental (Al, Fe, Sc, V, Cr, Mn, Co, Ni, Cu, Zn, As, Se, Mo, Ag, Cd, Sn, Sb, Ba, Pb, and Bi) contents of particles were determined in Düzce, Turkey. The particulate matter samplings were carried out in the winter and summer seasons simultaneously in both urban and sub-urban sampling sites. The average PM₁₀ concentration measured in the winter season was 86.4 and 27.3 μg/m³, respectively, in the urban and sub-urban sampling sites, while it was measured as 53.2 and 34.7 μg/m³ in the summer season. According to the results, it was observed that the PM₁₀ levels and the element concentrations reached higher levels, especially at the urban sampling site, in the winter season. The positive matrix factorization model (PMF) was applied to the data set for source apportionment. Analysis with the PMF model revealed six factors for both the urban (coal combustion, traffic, oil combustion, industry, biomass combustion, and soil) and sub-urban (industry, oil combustion, traffic, road dust, soil resuspension, domestic heating) sampling sites. Loadings of grouped elements on these factors showed that the major sources of the elements in the atmosphere of Düzce were traffic, fossil fuel combustion, and metal industry-related emissions.     

A puzzle over ecological footprint,energy consumption and economic growth: the case of Turkey

Environmental and Ecological Statistics - The paper investigates the non-linear causality from energy consumption and economic growth to ecological footprint for the case of Turkey by employing...     

Treatment of residual lubricating oil using rice husk-based material as ecological adsorbent

Journal of Material Cycles and Waste Management - One of the most significant environmental problems the world population faces is the inadequate disposal of petroleum derivatives. Lubricant oil is...     

Determination of Cadmium and Copper in Fish Samples from Sir And Menzelet Dam Lake Kahramanmaraş, Turkey

The cadmium and copper levels were determined in the total of 126 fish samples which belongs to five fish species collected from Sır and Menzelet Dam Lakes in Kahramanmaraş Province by Atomic Absorption Spectrophotometer. The concentrations of heavy metals were expressed as ppm wet weight of tissue. The mean levels of cadmium and copper in muscle, liver and gill tissues of Cyprinus carpiofrom the Menzelet Dam were found as 0.27, 0.91, 1.49 and 0.94, 1.2, 1.05, respectively. The mean levels of Cd in the muscle tissues of Leuciscus cephalusfrom the Menzelet Dam were found 0.32 ppm, Cd wasn't found in tissues of liver and gill. The mean levels of Cu in the muscle, liver and gill tissues were found as 3.17 ppm, 1.19 ppm, 0.96 ppm, respectively. The mean levels of the Cd and Cu in muscle and gill tissues of Acanthobrama marmid from the Sır Dam were found as 1.28, 2.64 and 0.72, 0.08, respectively. The levels of the Cd and Cu in muscle tissues of Cyprinus carpiofrom the Sır Dam were found 0.87 and 0.02 ppm, respectively. The mean levels of the Cd and Cu in the muscle and gill tissues of Chondrostoma regium from the Sır Dam were found to be 0.80, 2.62 and 0.67, 1.34 ppm, respectively. The mean levels of the Cd in the muscle tissues of the Silurus glanis was found as 0.60 ppm. In the muscle of the Silurus glanis from the Sır Dam, Cu was not found. The Sır Dam is more polluted than the Menzelet Dam from the point of Cd but less polluted than the Menzelet Dam From the point of Cu. A relationship was determined between species and their habitating region in terms of the levels reflected metal residues. In this study it was emphasized that the amounts of Cd and Cu in the samples were low, however, seas, lakes, rivers, soil, air and consumed foods etc. has to be controlled routinely.     

Characterization of the Leachate in an Urban Landfill by Physicochemical Analysis and Solid Phase Microextraction-GC/MS

The aim of this study is to evaluate extensively the characterization and identification of major pollutant parameters by paying attention to the organic chemical pollution for unregulated dumping site leachate in Eskişehir/Turkey. The study that is first and only one research has been very important data related with before new sanitary landfill site in Eskişehir city. For this purpose, in this study leachate samples were collected in-situ at monthly interval for a period of 8 months. Firstly, thirty three physicochemical parameters were monitored. Secondly, SPME technique was used for identification of organic pollutants. Meteorological data were also recorded for the same sampling period to correlate meteorological data and physicochemical parameters. Mean values are used in the correlation analysis. Correlation is shown only for the relationship between air temperature and NO₃ ⁻. No correlation has been found between rain and leachate quality parameters since the amount of rain was very low during the sampling period. However, analysis results were generally decreased in winter season when each parameter and each sampling point are examined separately. According to correlation between every parameter, especially solid content and dissolved oxygen concentration of leachate is affecting to other parameters. Also, sodium and potassium are changing proportionally with same parameters (suspended solids, fixed solids, dissolved oxygen) and high correlation between chloride and heavy metal concentration is showing. The results were statistically evaluated by use of SPSS 10.0 program. Second part of the study, the leachate was extracted by Solid Phase Microextraction (SPME) technique and then analyzed. Of the methodologies tested in this study, the best one selected was based on 100 μ m polydimethylsiloxane coated fiber (PDMS), headspace with heating (Δ HS) sampling mode and an extraction time of 15 min. at a temperature of 50 ^o C. Thirty three organic compounds in leachate were identified by GC/MS.