Evaluation of a fast wastewater odour characterisation procedure using a chemical sensor array

Sewage treatment works are one of the major sources that cause atmospheric odour pollution. The increase in the number of complaints about odour nuisance is due to the increase in environmental concerns. Unfortunately, the legislation on odour nuisance from sewage treatment works is very limited. In order to determine suitable thresholds on which to base legal standards, reliable and efficient odour measurement methods need to be defined. A chemical sensor array was developed for the purpose of measuring wastewater odour. This paper describes the development of the chemical sensor system which is specifically tuned to odours of wastewater origin and which can give an electronic measure of the wastewater odours. Odour emissions from a wastewater treatment facility were detected by using a quartz crystal microbalance (QCM) sensor array. The array consists of nine sensor elements, which were coated with different materials. In this paper, the usage of these novel instruments in the water industry was shown.     

Estimation of suspended sediment concentration in rivers using acoustic methods

Acoustic Doppler current meters (ADV, ADCP, and ADP) are widely used in water systems to measure flow velocities and velocity profiles. Although these meters are designed for flow velocity measurements, they can also provide information defining the quantity of particulate matter in the water, after appropriate calibration. When an acoustic instrument is calibrated for a water system, no additional sensor is needed to measure suspended sediment concentration (SSC). This provides the simultaneous measurements of velocity and concentration required for most sediment transport studies. The performance of acoustic Doppler current meters for measuring SSC was investigated in different studies where signal-to-noise ratio (SNR) and suspended sediment concentration were related using different formulations. However, these studies were each limited to a single study site where neither the effect of particle size nor the effect of temperature was investigated. In this study, different parameters that affect the performance of an ADV for the prediction of SSC are investigated. In order to investigate the reliability of an ADV for SSC measurements in different environments, flow and SSC measurements were made in different streams located in the Aegean region of Turkey having different soil types. Soil samples were collected from all measuring stations and particle size analysis was conducted by mechanical means. Multivariate analysis was utilized to investigate the effect of soil type and water temperature on the measurements. Statistical analysis indicates that SNR readings ob tained from the ADV are affected by water temperature and particle size distribution of the soil, as expected, and a prediction model is presented relating SNR readings to SSC mea surements where both water temperature and sediment characteristics type are incorporated into the model. The coefficients of the suggested model were obtained using the multivariate anal ysis. Effect of high turbidity conditions on ADV performance was also investigated during and after rain events.     

Mineral contents of seed and seed oils of Capparis species growing wild in Turkey

The mineral contents of seed and seed oils of Capparis species growing wild in Turkey were established by inductively coupled plasma–atomic emission spectrometry. Capparis spinosa var. spinosa (2010) and Capparis ovata var. canescens variety (2009) were determined to be rich in terms of mineral matter as 19,514.60 and 16,995.92 ppm as a total, respectively. C. spinosa var. spinosa collected from Mu?la-Milas region (2009) had the highest amount of Ca with 1,010.67 ppm in C. spinosa species and in C. ovata species. C. ovata var. canescens collected from Ankara-Beypazar? (2010) region had the highest amount of Ca with 833.92 ppm Ca amount in C. spinosa var. spinosa, inermis, herbaceae seeds decreased in 2010. C. spinosa var. inermis collected from Antalya-Serik (2010) in C. spinosa species had rich amount of Ca with 123.78 ppm and C. ovata var. palaestina seed oils collected from Mardin-Savur region (2009) had rich amount of Ca with 253.71 ppm in C. ovata species. The oil of C. spinosa var. herbaceae variety collected from Mardin-Midyat region (2010) was determined to have the highest major mineral matter (Ca, K, Mg, Na, and P) with 1,424.37 ppm in C. spinosa species. It was also determined that as a result, caper seed and oils were found to be important sources of nutrients and essential elements.     

The assessment of the relationship between various waterscapes and outdoor activities: Edirne,Turkey

The environment is very important in terms of the behaviours and actions of human beings, and activity–environment correlation is used frequently in outdoor arrangements. The environment must meet the requirements and expectations of society. Outdoor activities are the activities that contribute to the well-being of human beings in physical (heartbeat, respiration, blood pressure, etc.) (Ulrich, Journal of Environmental Psychology 11:210–230, 1991), psychological (fear, anxiety, depression, loneliness, stress, etc.) (Marcus and Barnes 1999) and behavioural (insomnia, nervousness, restlessness, passivity, etc.) (Ulrich 1999) terms. It is known that human beings are affected significantly by the environments they are in, and more importantly, it is known that the environment they are in affects their happiness status. The causes of this effect are the features and appearances of the spatial elements and components that mainly make up such environments. One of the elements that is used frequently in landscape is water. If one examines designed or natural open spaces, it may be observed that water has very distinctive features. Dynamic (in the form of a leak, with intense flow rate, cascade, foamy, squirting, jet, graded, etc.) and still water elements may be used with sculptures, plants, rocks and elevations (on land). This study aims to reveal which age groups of students enjoy the different types of activities with regards to water features and emotional associations that motion and characteristics of water bring out in human beings and also to reveal the water preferences of human beings, including their reasons for such preference. Thus, 20 different water compositions located in Edirne Province were selected, and in 2-min camera reels, the students of various age groups assessed water with various characteristic features via a survey. As a result, it was revealed that human beings from various age groups wish to perform different activities with water elements having distinctive characteristic features, and the types of water elements that are subject to various age groups’ like and dislike were determined. Kruskal–Wallis test was used during testing the effect of age differences. Chi-square analysis was used in order to examine the effect of age differences on preferences with regards to the activities that shall be performed at locations that include utilization of various water elements. The results reveal that while the use of water should be allowed in landscaping, selections regarding the elements of these water features should be made based on the type of activity and the age group of users in relation to the location.     

Quality of water used during cage cultivation of rainbow trout (Oncorhynchus mykiss) in Bereket HES IV Dam Lake (Muğla,Turkey)

A thorough investigation of the impact of rainbow trout (Oncorhynchus mykiss) cultivation on surface water quality in the area known as Bereket HES IV Dam Lake was conducted. Water samples were collected from October 2009 to June 2010 from four stations in the Dam Lake and analyzed for water temperature, pH, dissolved oxygen, electrical conductivity, nitrite nitrogen, nitrate nitrogen, and orthophosphate. Surface water quality was then evaluated based on the comparison of samples collected from three stations located near fish cages to those collected from a reference station outside the cultivation area as well as by the comparison with standards specified in the Water Pollution Registration Act. According to the Water Pollution Registration Act, the surface water quality of the Dam Lake was class I. Additionally, there were no significant differences in water quality within the Dam Lake among any of the sampling stations, including the reference station. Overall, these findings indicate that cage cultivation of rainbow trout may have a negative impact on the entire Dam Lake.     

Preparation, Thermal Properties and Thermal Reliability of Form-Stable Paraffin/Polypropylene Composite for Thermal Energy Storage

This study is focused on the preparation, characterization, and determination of thermal properties and thermal reliability of paraffin/polypropylene (PP) composite as a novel form-stable phase change material (PCM) for thermal energy storage applications. In the composite, paraffin acts as a PCM when PP is operated as supporting material. The composites prepared at different mass fractions of paraffin (50, 60, 70, 80, and 90 w/w%) by solution casting method were subjected to leakage test by heating the composites over the melting temperature of the PCM. The paraffin/PP composite (70/30 w/w%) is found as the maximum paraffin containing composite and was characterized using Fourier transform infrared spectroscopy, optic microscopy, differential scanning calorimetry (DSC), and thermal gravimetric analysis (TGA) techniques. DSC analysis indicated that the form-stable paraffin/PP composite melts at 44.77–45.52 °C and crystallizes at 53.55–54.80 °C. It has latent heats of 136.16 and −136.59 J/g for melting and crystallization, respectively. These thermal properties make it potential PCM for latent heat thermal energy storage (LHTES) purposes such as solar space heating applications. Accelerated thermal cycling tests indicated that the form-stable PCM had good thermal reliability. TGA also showed that the form-stable PCM degrades in two distinguishable steps and had good chemical stability.     

Effects of Alkali Treatment on the Properties of Short Flax Fiber–Poly(Lactic Acid) Eco-Composites

In this study, the influence of alkali (NaOH) treatment on the mechanical, thermal and morphological properties of eco-composites of short flax fiber/poly(lactic acid) (PLA) was investigated. SEM analysis conducted on alkali treated flax fibers showed that the packed structure of the fibrils was deformed by the removal non-cellulosic materials. The fibrils were separated from each other and the surface roughness of the alkali treated flax fibers was improved. The mechanical tests indicated that the modulus of the untreated fiber/PLA composites was higher than that of PLA; on the other hand the modulus of alkali treated flax fiber/PLA was lower than PLA. Thermal properties of the PLA in the treated flax fiber composites were also affected. T_g values of treated flax fiber composites were lowered by nearly 10 °C for 10% NaOH treatment and 15 °C for 30% NaOH treatment. A bimodal melting behavior was observed for treated fiber composites different than both of neat PLA and untreated fiber composites. Furthermore, wide angle X-ray diffraction analysis showed that the crystalline structure of cellulose of flax fibers changed from cellulose-I structure to cellulose-II.     

Amygdalin in bitter and sweet seeds of apricots

Hydrogen cyanide (HCN) poisoning due to amygdalin (AMY) in apricot seeds is one of the public health issues in Turkey. The aim of this study was to investigate the AMY content of 13 different apricot seeds including bitter and sweet ones, and which are either sulfurized or roasted. The AMY content was determined by a high-performance liquid chromatography. Release of HCN was predicted and total amount of seeds which can cause poisoning was calculated. The mean AMY content of bitter seeds was 26 ± 14 mg g^?1 and that of sweet seeds was 0.16 ± 0.09 mg g^?1. The consumption of small amounts of bitter seeds may cause cyanide poisoning.     

Grading of Parameters for Urban Tree Inventories by City Officials, Arborists, and Academics Using the Delphi Method

Tree inventories are expensive to conduct and update, so every inventory carried out must be maximized. However, increasing the number of constituent parameters increases the cost of performing and updating the inventory, illustrating the need for careful parameter selection. This article reports the results of a systematic expert rating of tree inventories aiming to quantify the relative importance of each parameter. Using the Delphi method, panels comprising city officials, arborists, and academics rated a total of 148 parameters. The total mean score, the top ranking parameters, which can serve as a guide for decision-making at practical level and for standardization of tree inventories, were: Scientific name of the tree species and genera, Vitality, Coordinates, Hazard class, and Identification number. The study also examined whether the different responsibilities and usage of urban tree databases among organizations and people engaged in urban tree inventories affected their prioritization. The results revealed noticeable dissimilarities in the ranking of parameters between the panels, underlining the need for collaboration between the research community and those commissioning, administrating, and conducting inventories. Only by applying such a transdisciplinary approach to parameter selection can urban tree inventories be strengthened and made more relevant.     

Assessment of the risk of phosphorus loading due to resuspended sediment

Resuspension is a multiphase phenomenon where suspended solids encounter water layers differing in physico-chemical properties that affect the reactions of phosphorus (P). The role of resuspended sediment as a sink or source of dissolved P was determined in a laboratory study of P desorption-sorption equilibria. Gradual mixing was simulated using decreasing solid concentrations and varying environmental conditions (pH, redox, ionic strength). To describe the P exchange when the particles encounter dissimilar water layers, the extent of P sorption to or desorption from solids was expressed as a function of P concentration in the bath solutions. The equilibrium phosphorus concentration (EPC), at which there is no net P release from or retention to the particles, proved to be a suitable parameter for assessment of P load risk. Under oxic conditions at pH 7, commonly prevailing in lakes, the EPC values ranged from 11 to 27 microg P L(-1). The larger the water volume the suspended material was mixed with, the higher the P concentration, allowing desorption to occur. As for chemical factors affecting P mobilization, EPC followed the order: pH 7 < pH 7 anoxic < pH 9. A separate extraction experiment revealed that elevated pH enhanced P mobilization more as the concentration of solids decresed. The results demonstrate that high pH (a common characteristic in eutrophic lakes during summer), when linked with intensive resuspension, may markedly increase the internal P loading risk. As for the risk assessment, the quantification of the internal P loading would be improved by isotherm studies combined with field observations.