Role of Amino Acids on <Emphasis Type="Italic">In Situ</Emphasis> Photografting of Jute Yarn with 3-(Trimethoxysilyl) Propylmethacrylate

To improve the mechanical performance of natural lignocellulosic jute yarn, grafting with [3-(trimethoxysilyl) propylmethacrylate] (TMSPM) monomer has been performed on in situ UV radiation and optimized the monomer concentration (30%) and irradiation time (30 min). Effect of various amino acids (1%) as additives in TMSPM with photografted jute yarn at optimized system has been studied. The polymer loading (PL) and tensile properties like tensile strength (TS) and elongation at break (Eb) of treated samples were enhanced by incorporation of amino acids and the highest properties (TS = 300% and Eb = 386%) achieved by the sample treated with l-Arginine (Arg) with 32.5% PL value. Weak acid like 3% acetic acid and inorganic acid like 1% sulfuric acid were also incorporated in the optimized system of TMSPM grafting and compared their effect on the tensile properties with amino acid treated samples. Water absorption and weathering resistance of treated and untreated samples were also performed and treated sample showed lesser water uptake as well as less weight loss and mechanical properties as compared to untreated samples.     

Pilot installation for the thermo-chemical characterisation of solid wastes

The increasing production and the large variety of wastes require operators of thermal treatment units to continuously adapt the installations or the functioning parameters to the different physical and chemical properties of the wastes. Usually, the treated waste is encountered in the form of heterogeneous mixtures. The classical tests such as thermogravimetry and calorimetric bomb operate component by component, separately. In addition to this, they can analyse only small quantities of waste at a time (a few grams). These common tests are necessary but insufficient in the global waste analysis in the view further thermal treatment. This paper presents an experimental installation, which was designed and built at the CNRS Science Division, Department of Industrial Methods, Compiègne University of Technology, France. It allows the determination of waste thermal and chemical properties by means of thermal treatment. Also, it is capable of continuously analysing significant quantities of waste (up to 50kg/h) as compared to the classical tests and it can work under various conditions: The installation reproduces the process conditions from incinerators or pyrolysis reactors. It also provides complete information on the kinetics of the waste thermal degradation and on the pollutant emissions. Using different mixtures of components present in the municipal solid waste and also in the reconstituted MSW samples, we defined a series of criteria for characterising waste behaviour during the stages of the main treatment process such as: feeding, devolatilisation/oxidation, advancement, solid residue evacuation, and pollutants emission.     

Preparation of aluminium-magnesium alloys and some valuable salts from used beverage cans

The purpose of this work is to recover standard aluminium-magnesium alloy(s) and some valuable salts from used beverage cans (UBCs). The suggested method updated the current recycling technology by augmenting removal of the coating paint, decreasing magnesium loss during melting process and improving hydrochloric acid leaching of the formed slag. Iron impurity present in the leaching solution, was removed by oxidation using oxygen gas or hydrogen peroxide and filtered as goethite. Results obtained revealed that a mixture of methyl ethyl ketone/dimethyl formamide entirely removes the paint coating at room temperature. The process compares favorably to the current methods involving firing or swell peeling. The coating decomposes to titanium dioxide by heating at 750 degrees C for 30 min. Standard compositions of Al-Mg alloys are formulated using secondary magnesium. The extent of recovery (R) of these alloy(s) is a function of the melting time and temperature and type of the flux. The maximum (R) value amounts to 94.4%. Sodium borate/chloride mix decreases magnesium loss to a minimum. The extent of leaching valuable salts from the slag increases with increasing the molarity, stoichiometric ratio and leaching temperature of the acid used. Removal of iron is a function of the potential of the oxidation process. Stannous chloride has been recovered from the recovered and dried salts by distillation at 700-750 degrees C.     

Development of a procedure for sustainable in situ aquifer denitrification

Denitrification experiments have provided data showing the pitfalls and successes in developing a sustainable injection/extraction system in a sand and gravel aquifer. Experiments increase in complexity from continuous injection at one well to automated‐pulsed eight well injections. In both continuous and pulsed injection of organic carbon, 40 mg NO_3‐N l^?1 was reduced below the detection limit of < 0.1 mg NO_3‐N l^?1 in the denitrification zones. Under continuous injection, accumulation of bacterial exudates in the vicinity of the injection well resulted in injection well clogging within ten days. Periodic cleaning of the injection well and the adjacent gravel matrix was accomplished by using a tool developed to circulate a cleaning solution composed of 5 percent H₂O₂ and 0.02 percent NaOCl; but, biofouling could not be eliminated. In the later experiments, acetate became the carbon amendment because ethanol promoted more biomass development. A specialized pulse injection procedure was developed to separate nitrate from acetate‐C and was successful in alleviating the proliferation of bacterial exudates without affecting the performance of the denitrification system. Using pulsed injection, a maximum of 72 percent nitrate reduction was accomplished in the extraction well water, and denitrification was sustained for three months without clogging. © 2003 Wiley Periodicals, Inc.     

Comparing Vapor Intrusion Mitigation System Performance for VOCs and Radon

This article summarizes a long‐term study of vapor intrusion mitigation system performance in a historic, unoccupied residential duplex with an extensive set of temporal variability observations. The experimental design included multiple cycles of subslab depressurization (SSD) system operation and shut‐off during a seven‐month period, followed by a year‐long period of continuous operation. Results showed that the system provided rapid pressure field extension and radon control as much as 100 days of operation before optimum volatile organic compound (VOC) mitigation was achieved. Greater variability in VOC concentrations than in radon concentrations was observed during the initial mitigation system cycling. Subslab VOC concentrations at numerous locations increased during this initial period of SSD operation, and indoor air VOC concentrations were more variable than radon. However, indoor air concentrations were considerably less variable (and lower) during the first year of continuous mitigation system operation. ©2015 Wiley Periodicals, Inc.     

Blending Linz–Donawitz and Blast Furnace slags with the Kambara reactor byproduct to improve their reuse in roadworks

Journal of Material Cycles and Waste Management - The use of industrial byproducts as replacement of natural aggregates has been extensively investigated to design eco-friendly roads. One of the...