Adsorption properties of kaolinite-based nanocomposites for Fe and Mn pollutants from aqueous solutions and raw ground water: kinetics and equilibrium studies

Raw kaolinite was used in the synthesis of metakaolinite/carbon nanotubes (K/CNTs) and kaolinite/starch (K/starch) nanocomposites. Raw kaolinite and the synthetic composites were characterized using XRD, SEM, and TEM techniques. The synthetic composites were used as adsorbents for Fe and Mn ions from aqueous solutions and natural underground water. The adsorption by the both composites is highly pH dependent and achieves high efficiency within the neutral pH range. The experimental adsorption data for the uptake of Fe and Mn ions by K/CNTs were found to be well represented by the pseudo-second-order kinetic model rather than the intra-particle diffusion model or Elovich model. For the adsorption using K/starch, the uptake results of Fe ions was well fitted by the second-order model, whereas the uptake of Mn ions fitted well to the Elovich model rather than pseudo-second-order and intra-particle diffusion models The equilibrium studies revealed the excellent fitting of the removal of Fe and Mn ions by K/CNTs and Fe using K/starch with the Langmuir isotherm model rather than with Freundlich and Temkin models. But the adsorption of Mn ions by K/starch is well fitted with Freundlich rather than Temkin and Langmuir isotherm models. The thermodynamic studies reflected the endothermic nature and the exothermic nature for the adsorption by K/CNTs and K/starch nanocomposites, respectively. Natural ground water contaminated by 0.4 mg/L Fe and 0.5 mg/L Mn was treated at the optimum conditions of pH 6 and 120 min contact time. Under these conditions, 92.5 and 72.5% Fe removal efficiencies were achieved using 20 mg of K/CNTs and K/starch nanocomposites, respectively. Also, K/CNTs nanocomposite shows higher efficiency in the removal of Mn ions as compared to K/starch nanocomposite.     

Cytotoxic effects of seven Tunisian hospital wastewaters on the proliferation of human breast cancer cell line MDA-231: correlation with their chemical characterization

Environmental Science and Pollution Research - Hospital wastewaters contain large amounts of pharmaceutical residues, which may eventually be discharged into the aquatic environment through...     

Growth-corruption-health triaca and environmental degradation: empirical evidence from Indonesia,Malaysia, and Thailand

Environmental Science and Pollution Research - This study examines the impact of economic growth, corruption, health, and poverty on environmental degradation for three countries from ASEAN, namely...     

Investigating the relationship between lead speciation and bioaccessibility of mining impacted soils and dusts

Environmental Science and Pollution Research - Lead (Pb) bioaccessibility measurements have been the subject of much research in recent years, given the desire to develop a cost-effective and...     

Spatio-temporal assessment and trend analysis of surface water salinity in the coastal region of Bangladesh

The study was designed to collect water samples over two seasons—wet-monsoon season (n = 96) (March–April) and dry-monsoon season (n = 44) (September–October)—to understand the seasonal variation in anion and cation hydrochemistry of the coastal rivers and estuaries contributing in the spatial trend in salinity. Hydrochemical examination of wet-monsoon season primarily revealed Ca–Mg–HCO₃ type (66%) and followed by Na–Cl type (17.70%) water. In the dry-monsoon season, the scenario reversed with primary water being Na–Cl type (52.27%) followed by Ca–Mg–HCO₃ type (31.81%). Analysis of Cl/Br molar ratio vs. Cl (mg/L) depicted sampling area affected by seawater intrusion (SWI). Spatial analysis by ordinary kriging method confirmed approximately 77% sample in the dry-monsoon, and 34% of the wet-monsoon season had shown SWI. The most saline-intruded areas in the wet-monsoon seasons were extreme south-west coastal zone of Bangladesh, lower Meghna River floodplain and Meghna estuarine floodplain and south-eastern part of Chittagong coastal plains containing the districts of Chittagong and Cox’s Bazar adjacent to Bay of Bengal. In addition, mid-south zone is also affected slightly in the dry-monsoon season. From the analyses of data, this study could further help to comprehend seasonal trends in the hydrochemistry and water quality of the coastal and estuarine rivers. In addition, it can help policy makers to obligate some important implications for the future initiatives taken for the management of land, water, fishery, agriculture and environment of coastal rivers and estuaries of Bangladesh.

     

Wheat productivity responses in the rice-based system under different no-till techniques and nitrogen sources

Environmental Science and Pollution Research - No-till wheat is gaining popularity in rice-based cropping system as it provides a better chance for timely planting of wheat, management of crop...     

Applying the three R’s: Reduce,reuse, and recycle in the chemical industry

Pollution prevention (P2) assessment was conducted by applying the three R’s, reduce, reuse, and recycle, in a chemical industry for the purpose of reducing the amount of wastewater generated, reusing paint wastewater in the manufacture of cement bricks, recycling cooling water, and improving water usage efficiency. The results of this study showed that the annual wastewater flow generated from the paint manufacturing can be reduced from 1,100 m³ to 488.4 m³ (44.4% reduction) when a high-pressure hose is used. Two mixtures were prepared. The first mixture (A) contains cement, coarse aggregate, fine aggregate, Addicrete BVF, and clean water. The second mixture (B) contains the same components used in the first mixture, except that paint wastewater was used instead of the clean water. The prepared samples were tested for water absorption, toxicity, reactivity, compressive strength, ignitability, and corrosion. The tests results indicated that using paint wastewater in the manufacture of the cement bricks improved the mechanical properties of the bricks. The toxicity test results showed that the metals concentration in the bricks did not exceed the U.S. EPA limits. This company achieved the goal of zero liquid discharge (ZLD), especially after recycling 2,800 m³ of cooling water. The total annual saving could reach $42,570 with a payback period of 41 days.

Implications: This research focused on improving the water usage efficiency, reducing the quantity of wastewater generated, and potentially reusing wastewater in the manufacture of cement bricks. Reusing paint wastewater in the manufacture of the bricks prevents the hazardous pollutants in the wastewater (calcium carbonate, styrene acrylic resins, colored pigments, and titanium dioxide) from entering and polluting the surface water and the environment. We think that this paper will help to find the most efficient and cost-effective way to manage paint wastewater and conserve fresh water resources. We also believe that this paper provides a rich agenda for future research in water conservation and industrial wastewater reuse subjects.     

Reuse paint wastewater in the manufacture of cement bricks and tiles

Journal of Material Cycles and Waste Management - Waste management is one of the most important and serious issues facing many developing countries. The main purpose of this research involves...     

Sugarcane Bagasse Paper Reinforced by Cellulose Nanofiber (CNF) and Bleached Softwood Kraft (BSWK) Pulp

This study explores the effects of bleached softwood kraft pulp (BSWK) as a conventional reinforcing material in comparison with cellulose nanofiber (CNF) as an emerging bionanomaterial on the bleached soda sugarcane bagasse (BSSB) paper furnish. Cationic polyacrylamide was selected as a retention aid along with the CNF addition to retain it on fiber surfaces during the papermaking process. The results showed that though the effects of CNF were similar to those of BSWK in the most of properties but there were some important differences which can industrially be noticeable. In one hand, both of cellulosic elements, when substituted for the BSSB at the 5 or 10 % levels, gave increases in the paper strength, i.e. samples containing 10 % CNF yielded similar tensile strength (53 N m/g) and a more consolidated structure (14 % increment of the density) than those produced with 10 % BSWK. CNF addition had opposite effects on the air-permeability of the resulting paper. Unlike BSKW, the addition of CNF had a strong favorable effect on tear strength, but it was markedly slowed the rate of drainage time when it was especially added at 10 % level of the final furnish.     

DRAINMOD-FOREST: Integrated Modeling of Hydrology, Soil Carbon and Nitrogen Dynamics, and Plant Growth for Drained Forests

We present a hybrid and stand-level forest ecosystem model, DRAINMOD-FOREST, for simulating the hydrology, carbon (C) and nitrogen (N) dynamics, and tree growth for drained forest lands under common silvicultural practices. The model was developed by linking DRAINMOD, the hydrological model, and DRAINMOD-N II, the soil C and N dynamics model, to a forest growth model, which was adapted mainly from the 3-PG model. The forest growth model estimates net primary production, C allocation, and litterfall using physiology-based methods regulated by air temperature, water deficit, stand age, and soil N conditions. The performance of the newly developed DRAINMOD-FOREST model was evaluated using a long-term (21-yr) data set collected from an artificially drained loblolly pine ( L.) plantation in eastern North Carolina, USA. Results indicated that the DRAINMOD-FOREST accurately predicted annual, monthly, and daily drainage, as indicated by Nash-Sutcliffe coefficients of 0.93, 0.87, and 0.75, respectively. The model also predicted annual net primary productivity and dynamics of leaf area index reasonably well. Predicted temporal changes in the organic matter pool on the forest floor and in forest soil were reasonable compared to published literature. Both predicted annual and monthly nitrate export were in good agreement with field measurements, as indicated by Nash-Sutcliffe coefficients above 0.89 and 0.79 for annual and monthly predictions, respectively. This application of DRAINMOD-FOREST demonstrated its capability for predicting hydrology and C and N dynamics in drained forests under limited silvicultural practices.