Degradation characteristics and metabolic pathway of 17alpha-ethynylestradiol by Sphingobacterium sp. JCR5

A 17alpha-ethynylestradiol (EE2)-degrading bacterium was isolated from the activated sludge of the wastewater treatment plant (WWTP) of an oral contraceptives producing factory in Beijing, China. On the basis of its morphology, biochemical properties and the 16S rDNA sequence analysis, this strain was identified as Sphingobacterium sp. JCR5. This strain grew on EE2 as sole source of carbon and energy, and metabolized up to 87% of the substrate added (30 mgl-1) within 10 d at 30 degrees C. In addition to EE2 the strain could be cultivated on steroidal estrogens like estrone (E1), 17beta-estradiol (E2), estriol (E3) and mestranol (MeEE2), the intermediates of contraceptive medicine processing and on some aromatic compounds. Mass spectrum analysis of the EE2 degradation showed that in the first step it is oxygenized to E1, 2-hydroxy-2,4-dienevaleric acid and 2-hydroxy-2,4-diene-1,6-dioic acid, which are the main catabolic intermediates. The former was analogous to the pathway of a previously reported testosterone-degrading bacterium Comamonas testosteroni TA441 and the latter is a metabolite with a different cleavage position of 3-hydroxy-4,5-9,10-disecoestrane-1(10),2-diene-5,9,17-trione-4-oic acid from the former.     

Monitoring and identification of airborne asbestos in unorganized sectors, India

Rajasthan state in India is credited to cater more than 90% of total production of asbestos in this country, of which around 60% is processed there in unorganized sectors including milling and manufacturing of asbestos-based products. Unorganized asbestos units particularly mills showed unhealthy occupational conditions, therefore industrial hygiene study was carried out focusing on the prevalence of asbestos fibres in air at work zone area of asbestos milling units. Fibre levels were in the range of 2.00-5.09f/cm(3) and 4.07-15.60f/cm(3) in unorganized asbestos mills of Rajasthan located at Beawer and Deogarh districts, respectively. Like asbestos concentration, fibre type and length are also vital factors in the health risk assessment of industrial workers. Phase contrast and polarized light microscopic study of asbestos fibres showed their amphibole nature registering about 90% as tremolite and rest as anthophyllite. Fibre length measured micrometrically were sub-grouped in <10microm, 11-20microm, 21-30microm and >30microm. About 30-40% fibres belonged to sub-group <10microm. It is concluded that unorganized asbestos mills bear poor industrial unhygienic conditions reflected specifically from their manyfold higher fibre concentrations than the Indian and International standards. Poor industrial unhygienic conditions are attributable to obsolete milling technology, lack of pollution control devices and escape from regulatory control.     

Petroleum contaminated soil in Oman: Evaluation of bioremediation treatment and potential for reuse in hot asphalt mix concrete

This paper presents a study that aims at evaluating the leaching characteristics of petroleum contaminated soils as well as their application in hot mix asphalt concrete. Soil samples are environmentally characterized in terms of their total heavy metals and hydrocarbon compounds and leachability. The total petroleum hydrocarbon (TPH) present in the PCS before and after treatment was determined to be 6.8% and 5.3% by dry weight, indicating a reduction of 1% in the TPH of PCS due to the current treatment employed. Results of the total heavy metal analysis on soils indicate that the concentrations of heavy metals are lower when extraction of the soil samples is carried out using hexane in comparison to TCE. The results show that the clean soils present in the vicinity of contaminated sites contain heavy metals in the following decreasing order: nickel (Ni), followed by chromium (Cr), zinc (Zn), copper (Cu), lead (Pb), and vanadium (V). The current treatment practice employed for remediation of the contaminated soil reduces the concentrations of nickel and chromium, but increases the concentrations of all remaining heavy metals.     

Bioavailable DDT residues in sediments: laboratory assessment of ageing effects using semi-permeable membrane devices

We describe the reduction in bioavailability of DDT in contaminated soil after it was incubated as sediment for 365 d. Bioavailability was assessed using semi-permeable membranes. Contaminated soils from three cattle dip sites, one spiked paired uncontaminated site, and one spiked OECD standard soil were studied. Sandy soil with residues of 1880 mg/kg summation operator DDT incurred since 1962, initially had 4.6% of summation operator DDT available, reducing to 0.6% following 365 d. Clay soil (1108 mg summation operator DDT/kg) had 4.1% initially available, reducing to 0.3% after 365 d. Freshly spiked soils had a greater amount of DDT initially available (10.9%), but this reduced to 1.5% by the end of the incubation. Of the DDT congeners, both o,p'-DDD and p,p'-DDD were most bioavailable in the soils, but also had the most significant decrease following incubation.     

Changes in water-extractability of soil inorganic phosphate induced by chloride and sulfate salts

GOAL, SCOPE AND BACKGROUND: One of the principal experimental variables which effect the results of phosphorus (P) sorption studies is the ionic composition, in addition to both species and concentrations of the contacting solution. In spite of the realization that ionic species, concentrations and their compositions effect P sorption and/or desorption, most of the salt-related studies are confined to Cl- (anion) in association with different cations. While the knowledge about the comparative response of P to Cl- and SO4(2-) ions was lacking, the current study was conducted to evaluate the comparative effects of anions (in association with cations) on inorganic P release and P fractions in the soil. METHODS: The test soil was amended with livestock compost manure (OP); KH2PO4 (IPk) or Ca(H2PO4)2 (IPc) at a rate of 1ppm. Soil was subjected to one salt and nine subsequent water extractions and different P fractions were measured. Four salt types, NaCl, Na2SO4, KCl and K2SO4, were used at levels of 0.5 M. RESULTS: Irrespective of P sources, P release was substantially increased in the salt-pretreated soil as compared to the non-saline soil. Sulfate salts released more P in subsequent water extractions than Cl-. Phosphorus release decreased for salt types with Na2SO4 > NaCl > K2SO4 > KCl and for P sources with OP approximately IPk > Control (without P application) > IPc, respectively. DISCUSSION: No previous study was found to compare the results of more P release by SO4(2-) than Cl- salt. Most of the previous studies focused on anion sorption capacities, but the mechanism for their adsorption is not fully known. Most of the authors suggested that the mechanisms of SO4(2-) and PO4(3-) adsorption are similar, and that both ions compete for the same sorption sites (Kamprath et al. 1956, Couto et al. 1979, Pasricha and Fox 1993). Although adsorbed SO4(2-) does not compete strongly with PO4(3-), there is likely to be some competition for sorption between these anions which may cause comparatively more P release by SO4(2-) than Cl- salts. Higher P release by Na-saturation could be due to the release of P associated with oxide surfaces or due to dissolution of Ca-P phases (Curtin et al. 1987). CONCLUSIONS: Study clearly showed that not only cations species differ for P desorption capacity, but associated anions also play a vital role in the fate of P under saline environments. Synergetic effects exist between Na and SO4(2-) ions which enhanced the P release. This study has also confirmed the fact that P from organic sources is available as well as from inorganic P sources. However, P release depends more on the type of P source applied than on total P. RECOMMENDATIONS AND PERSPECTIVES: It is highly recommended that more than one anion species must be used in the research plans for evaluating the P response in a saline environment. The results have important implications from the point of view of research, as most of the researchers focus on different cations only for evaluating P response to salts from an environmental point of view. However, our study has made it clear that anions in association with cations differed for their effects on P release.     

Genotypic variation of nitrogen use efficiency in Indian mustard

This experiment was conducted to investigate the variation of nitrogen efficiency (NE), nitrogen uptake efficiency (UE), physiological nitrogen use efficiency (PUE) among Indian mustard genotypes, grown under N-insufficient and N-sufficient conditions. Nitrogen efficiency varied from 52.7 to 92.8. Seed yield varied from 1.14 t ha(-1) to 3.21 t ha(-1) under N-insufficient condition, while 2.14 t ha(-1)-3.33 t ha(-1) under N-sufficient condition. Physiological basis of this difference was explained in terms of nitrogen uptake efficiency and physiological nitrogen use efficiency, and their relationship with the growth and yield characteristics. While nitrogen uptake efficiency was positively correlated with plant biomass (0.793**), leaf area index (0.664*), and leaf nitrogen content (0.783**), physiological nitrogen use efficiency is positively correlated with photosynthetic rate (0.689**) and yield (0.814**). This study suggests that genotype having high nitrogen uptake efficiency and high physiological nitrogen use efficiency might help in reducing the nitrogen load on soil without any penalty on the yield.     

Use of constructed wetland for the removal of heavy metals from industrial wastewater

This study was conducted to investigate the effectiveness of a continuous free surface flow wetland for removal of heavy metals from industrial wastewater, in Gadoon Amazai Industrial Estate (GAIE), Swabi, Pakistan. Industrial wastewater samples were collected from the in-let, out-let and all cells of the constructed wetland (CW) and analyzed for heavy metals such as lead (Pb), cadmium (Cd), iron (Fe), nickel (Ni), chromium (Cr) and copper (Cu) using standard methods. Similarly, samples of aquatic macrophytes and sediments were also analyzed for selected heavy metals. Results indicate that the removal efficiencies of the CW for Pb, Cd, Fe, Ni, Cr, and Cu were 50%, 91.9%, 74.1%, 40.9%, 89%, and 48.3%, respectively. Furthermore, the performance of the CW was efficient enough to remove the heavy metals, particularly Cd, Fe, and Cu, from the industrial wastewater fed to it. However, it is suggested that the metal removal efficiency of the CW can be further enhanced by using proper management of vegetation and area expansion of the present CW.     

The effects of drainage basin geomorphometry on minimum low flow discharge: the study of small watershed in Kelang River Valley in Peninsular Malaysia

This study investigate the relationships between genomorphometric properties and the minimum low flow dischare of undisturbed drainage basins in the Taman BukitCahaya Seri Alam Forest Reserve,Peninsular Malaysia.The drainage basins selected were third-order basins so as to facilitate a common base for sampling and performing an unbiased statistical analyses.Three levels of relationships were observed in the study.Significant relationships exised between the genomorphometric properties as shown by the correlation network analysis;secondly,individual geomorphometric properties were observed to influence minimum flow discharge;and finally,the multiple regression model set up showed that minimum flow discharge(Qnub)was dependent of basin area(AU),stream length(LS),maximum relief(Hmax),average relief (HAV) and stream frequency(SF).These findings further enforced other studies of this nature that drainage basins were dynamic and functional entities whose operations were governed by complex interrelationships occurring within the basins.Changes to any of the geomorphometric properties would influence their role as basin regulators thus influencing a change in basin response.In the case of the basin‘s minimum low flow,a change in any of the properties considered in the regression model influenced the “time to peak”of flow.A shorter time period would mean higher discharge,which is generally considered the prerquisite to flooding.This research also conclude that the role of geomorphometric properties to control the water supply within the stream through out the year even though during the drought and less precipitations months .Drainage basins are sensitive entities and any deterioratons involve will generate reciprocals and response to water supply as well as the habitat within the areas.     

Waste management strategies for concrete

Recycling and reuse of waste such as building rubble, concrete lumps, etc. generated at construction and demolition sites form part of a wider, complex issue, primarily relating to improving supplies of construction material and solving problems of disposal of waste construction material. Within the framework of the sustainable development of the environment, the use of waste materials with minimum environmental impact has received much attention. The conversion of a large amount of demolished waste into an alternative resource will conserve the depleting natural resources of building materials. Demolished waste is mainly used as a non-stabilized base or sub-base in highway construction. The present paper discusses the recycling process and makes an effort to assess a safe and economic use of recycled concrete as a structural grade material for the construction industry. Extensive tests of structural properties such as compressive strength, flexural strength and split tensile strength of recycled concrete were carried out, in which cement and similarly fine aggregate were partially replaced by demolished waste to obtain recycled concrete and recycled aggregate concrete whose properties were compared with results for the conventional concrete.     

Heavy metal contamination in water, soil, and vegetables of the industrial areas in Dhaka, Bangladesh

Concentrations of Cu, Zn, Pb, Cr, Cd, Fe, and Ni have been estimated in soils and vegetables grown in and around an industrial area of Bangladesh. The order of metal contents was found to be Fe > Cu > Zn > Cr > Pb > Ni > Cd in contaminated irrigation water, and a similar pattern Fe > Zn > Ni > Cr > Pb > Cu > Cd was also observed in arable soils. Metal levels observed in different sources were compared with WHO, SEPA, and established permissible levels reported by different authors. Mean concentration of Cu, Fe, and Cd in irrigation water and Cd content in soil were much above the recommended level. Accumulation of the heavy metals in vegetables studied was lower than the recommended maximum tolerable levels proposed by the Joint FAO/WHO Expert Committee on Food Additives (1999), with the exception of Cd which exhibited elevated content. Uptake and translocation pattern of metal from soil to edible parts of vegetables were quite distinguished for almost all the elements examined.