People's Perception About Participatory Developmental Programs: Lessons from the Mountain Risk Engineering Program in the Indian Central Himalaya

The Indian Himalayan Region (IHR) is suffering from environmental degradation due to population pressure and infra-structural needs. This is coupled with a natural setting, which creates problems of accelerated soil erosion and mass wasting. In view of these environmental difficulties and the growing concern for effective restoration, there has become an urgent need for multi-disciplinary coordinated improvement schemes. The mitigation of risk arising from hazardous mass wasting processes, through a careful and systematic approach, has helped in the development of the concept of Mountain Risk Engineering (MRE). The MRE practices involve an integrated approach to solving the infra-structural engineering problems of hilly and mountainous areas through environmentally conscious cost-effective and site-specific designs. However, the role of people's participation is extremely crucial for the success of such programs. This paper analyzes the perception of the local people about the approaches adopted in MRE participatory developmental programs and throws light on the intricacies of peoples' participation.     

Impact of Drip Irrigation Method,Soil, and Virus Type on Tomato and Cucumber Contamination

The goal of this study was to better quantify the degree of viral contamination of tomato and cucumber in relationship to virus type, soil type, and irrigation method. Tomatoes and cucumbers were grown in ten-gallon (37.8 L) buckets filled with Pima clay loam or Brazito sandy loam soils. Plants were irrigated with secondary wastewater effluent using surface drip irrigation or subsurface drip irrigation. At specified time intervals irrigation water was seeded with bacteriophages MS-2 and P22, poliovirus type 1 (PV1), enteric adenovirus 40 (Ead 40), and hepatitis A virus. Surface drip irrigation always resulted in viral contamination of both the above and below ground parts of both crops. The roots showed the greatest level of contamination, followed by leaves and fruits. In contrast, with subsurface drip irrigation no viruses were detected in any of the above ground plant surfaces. It was found that under similar soil type and irrigation method, risk of crop contamination was similar for all of the viruses studied. It can be concluded that method of irrigation is the single most critical factor in the contamination trend of different parts of crop plants. Plant parts can be categorized into three groups (root, stem, and leaf/fruit) based on the risk of viral contamination from irrigation water.     

Performance of a small-scale solar-powered adsorption cooling system

In this study, an experimental investigation on the performance of a small-scale residential-size solar-driven adsorption (silica gel-water) cooling system that was constructed at Assiut University campus, Egypt is carried out. As Assiut area is considered as hot, arid climate, field tests for performance assessment of the system operation during the summer season are performed under different environmental operating conditions. The system consists of an evacuated tube with a reflective concentration parabolic surface solar-collector field with a total area of 36 m², a silica gel-water adsorption chiller of 8 kW nominal cooling capacity, and hot and cold water thermal storage tanks of 1.8 and 1.2 m³ in volume, respectively. The results of summer season field test show that under daily solar insolation varying from 21 to 27 MJ/m², the solar collectors employed in the system had high and almost constant thermal efficiency. The daily solar-collector efficiency during the period of system operation ranged from about 50% to 78%. The adsorption chiller performance shows that the chiller average daily coefficient of performance (COP) was 0.41 with the average cooling capacity of 4.4 kW when the cooling-water and chilled-water temperatures were about 31°C and 19°C, respectively. As the chiller cooling water is cooled by the cooling tower in the hot arid area, the cooling water is at a higher temperature than the design point of the chiller. Therefore, an experiment was carried out using the city water for cooling. The results show that an enhancement in the chiller COP by 40% and the chilling power by 17% has been achieved when the city water was 27.7°C.     

Blood-Pb and hair-Pb levels in donor-matched samples

Lead concentrations in blood and scalp hair of 200 school boys, aged 6-8 years, were measured by electrothermal atomic absorption spectrometry. The mean blood-Pb concentration was 6.8 microg dl(-1) and the mean hair-Pb concentration was 9.7 microg g(-1) (dry weight). These values are well within the normal range for the respective tissues, indicating that the children studied are presently at relatively low risk from environmental lead pollution. A correlation analysis carried out on the data failed to show any statistically significant correlation (r = 0.13, p < 0.05) between the blood-Pb and hair-Pb concentrations.     

Delineating shallow saline groundwater zones from Southern India using geophysical indicators

A geophysical survey was conducted over an industrial belt encompassing 80 functional leather factories in Southern India. These factories discharge untreated effluents which pollute shallow groundwater where electrical conductivity (EC) value had a wide range between 545 and 26,600 μS/cm (mean, 3, 901 μS/cm). The ranges of Na⁺ and Cl^? ions were from 46 to 4,850 mg/L (mean, 348 mg/L) and 25 to 10,390 mg/L (mean, 1,079 mg/L), respectively. Geoelectrical layer parameters of 37 vertical electrical soundings were analyzed to demarcate fresh and saline water zones. However, the analysis not did lead to a unique resolution of saline and fresh waters. It was difficult to assign a definitive value to the aquifer resistivity of any area. Thus, geophysical indicators, namely longitudinal unit conductance (S), transverse unit resistance (T), and average longitudinal resistivity (R _s), were calculated for identifying fresh and saline waters. Spatial distributions of S, T, and R _s reflected widely varying ranges for the saline and fresh water zones. Further, the empirical relation of formation factor (F) was established from pore-water resistivity and aquifer resistivity for fresh and saline aquifers, which may be used to estimate local EC values from the aquifer resistivity, where well water is not available.     

Uncurtaining the pivotal role of ABC transporters in diabetes mellitus

Environmental Science and Pollution Research - The metabolic disorders are the edge points for the initiation of various diseases. These disorders comprised of several diseases including diabetes,...     

Distribution and availability of potentially toxic metals in soil in central area of Belgrade,Serbia

Belgrade, capital city of Serbia, has over 1,600,000 inhabitants and over 400,000 vehicles trafficking every day on its streets. The investigation of soil pollution was performed by sequential extraction analysis to investigate the availability of potentially toxic metals (Zn, Cd, Pb, Co, Ni, Cu, Cr and Mn) under different oxidation and pH conditions. All investigated metals were mainly extracted from soils with neutral or acidic extractants. Serious pollution was observed along roads and streets with high traffic frequency, but Pb and Ni pollution was the highest since their concentrations exceed both soil Serbian standard and Canadian guidance values and is characteristic for all investigated sites. Cd, Cu, Cr and Zn concentrations are moderately high since they are between Canadian guideline and Serbian standard.     

Systematic Development of an Artificial Neural Network Model for Real-Time Prediction of Ground-Level Ozone in Edmonton,Alberta, Canada

Abstract

Ground-level ozone is a secondary pollutant that has recently gained notoriety for its detrimental effects on human and vegetation health. In this paper, a systematic approach is applied to develop artificial neural network (ANN) models for ground-level ozone (O₃) prediction in Edmonton, Alberta, Canada, using ambient monitoring data for input. The intent of these models is to provide regulatory agencies with a tool for addressing data gaps in ambient monitoring information and predicting O₃ events. The models are used to determine the meteorological conditions and precursors that most affect O₃ concentrations. O₃ time-series effects and the efficacy of the systematic approach are also assessed. The developed models showed good predictive success, with coefficient of multiple determination values ranging from 0.75 to 0.94 for forecasts up to 2 hr in advance. The inputs most important for O₃ prediction were temperature and concentrations of nitric oxide, total hydrocarbons, sulfur dioxide, and nitrogen dioxide.     

Analyses of phenolic compounds occurring in olive oil mill wastewaters by GC–MS

Phenolic compounds in olive oil mill wastewaters were analysed by HRGC–MS after extracting the acidified solution with ethyl acetate and derivatization with N,O-bis(trimethylsilyl)trifluoroacetamide. Both simple and complex phenols were detected with the latter being the most abundant. 1,2-dihydroxybenzene (catechol), p-hydroxyphenyl ethanol (tyrosol), 3,4-dihydroxyphenyl ethanol (hydroxytyrosol) and 4-hydroxy-3-methoxyphenyl ethanol (homovanillyl alcohol) predominated among the simple phenols using a gas chromatograph coupled with a mass selective detector.     

Residues of PCDD,PCDF, and PCBs in some marine organisms in Lake Temsah,Ismailia, Egypt

Residues of PCDDs/F, non-ortho, mono-ortho PCBs, and other PCBs were monitored in the tissues of mullet fish, bolti fish, bivalves and crab taken from Lake Temsah, at Ismailia, Egypt.

Results showed that 2,3,7,8 Tetra CDD and 1,2,3,7,8 Penta CDD were the most frequently detected PCDD congeners. Similarly, 2,3,7,8 Tetra CDF, 1,2,3,7,8 Penta CDF and 2,3,4,7,8 Penta CDF were the most frequently detected PCDF congeners. No relationship was apparent between the concentrations of detected PCDDs congeners and the degree of chlorination, except with crab samples in which an increase in the chlorination coincided with a decrease in the concentrations of the congeners.

In PCDF congeners, detected residues have had a reversed relationship with chlorination increase. In PCDD congeners, Octa CDD had the highest detected concentrations in the two fish species, while in the bivalves and crab, 2,3,7,8 Tetra CDD had the highest concentrations. The mullet fish had the highest total PCDDs concentration, at 0.398?pg/g fresh weight, followed by crab at 0.395?pg/g fresh weight, then bivalves and bolti fish at 0.187 and 0.062?pg/g fresh weight, respectively. In all the examined organisms, the total concentrations of PCDFs were much higher than the total concentrations of the PCDD congeners. The WHO–TEQ values were 11.92, 39.12, 25, and 3.6?pg/g fresh weight, for mullet fish, bolti fish, bivlaves and crab, respectively. The concentration of the mono-ortho congeners CB 118 was the highest detected of all non-ortho and mono-ortho PCBs congeners, with values of 0.382, 0.022, 0.231 and 0.357?ng/g fresh weight, in mullet fish, bolti fish, bivalves and crab, respectively. The WHO–TEQ concentrations were 0.799, 0.003?pg/g fw, 0.05?pg/g fresh weight, 0.676?pg/g, and 0.799?pg/g fresh weight, for the same species, respectively. The total concentration of PCBs 28, 52, 95, 99, 101, 105, 110, 118, 138, 146, 149, 151, 153, 170, 177, 180, 187 were 6.86?ng/g fresh weight for mullet fish, 0.2?ng/g fresh weight, for bolti fish, 2.72?ng/g fresh weight for bivalves and 2.8?ng/g fresh weight for crab, respectively.