Challenge of the Future

ABSTRACT

The separation of Cr(III) from collagen in chromium-tanned leather (wet-blue) is achieved by a combination of the protein (collagen) stabilization (protective cross-linking) and a subsequent labilization of the Cr(III) species bound to the protein. During the separation collagen retains the tertiary triple helical and higher (fibril) structures. The model proposed for the protective cross-linking involves inter- rather than intramolecular bridging, that is, a supramolecular bridging. The process of chromium removal takes place in a restricted aqueous environment, and it can be characterized as semihomogeneous or semiheterogeneous.     

An introduction to decision science for conservation

Biodiversity conservation decisions are difficult, especially when they involve differing values, complex multidimensional objectives, scarce resources, urgency, and considerable uncertainty. Decision science embodies a theory about how to make difficult decisions and an extensive array of frameworks and tools that make that theory practical. We sought to improve conceptual clarity and practical application of decision science to help decision makers apply decision science to conservation problems. We addressed barriers to the uptake of decision science, including a lack of training and awareness of decision science; confusion over common terminology and which tools and frameworks to apply; and the mistaken impression that applying decision science must be time consuming, expensive, and complex. To aid in navigating the extensive and disparate decision science literature, we clarify meaning of common terms: decision science, decision theory, decision analysis, structured decision-making, and decision-support tools. Applying decision science does not have to be complex or time consuming; rather, it begins with knowing how to think through the components of a decision utilizing decision analysis (i.e., define the problem, elicit objectives, develop alternatives, estimate consequences, and perform trade-offs). This is best achieved by applying a rapid-prototyping approach. At each step, decision-support tools can provide additional insight and clarity, whereas decision-support frameworks (e.g., priority threat management and systematic conservation planning) can aid navigation of multiple steps of a decision analysis for particular contexts. We summarize key decision-support frameworks and tools and describe to which step of a decision analysis, and to which contexts, each is most useful to apply. Our introduction to decision science will aid in contextualizing current approaches and new developments, and help decision makers begin to apply decision science to conservation problems.     

Use of headspace SPME-GC-MS for the analysis of the volatiles produced by indoor molds grown on different substrates

An automated headspace solid phase microextraction method followed by GC-MS analysis was used to evaluate and compare the in vitro production of microbial volatile organic compounds (MVOCs) on malt extract agar, plasterboard and wallpaper. Five fungal strains were isolated from the walls of water-damaged houses and identified. In addition, four other common molds were studied. In general, MVOC production was the highest on malt extract agar. On this synthetic medium, molds typically produced 2-methylpropanol, 2-methylbutanol and 3-methylbutanol. On wallpaper, mainly 2-ethylhexanol, methyl 2-ethylhexanoate and compounds of the C8-complex such as 1-octene-3-ol, 3-octanone, 3-octanol and 1,3-octadiene were detected. The detection of 2-ethylhexanol and methyl 2-ethylhexanoate indicates an enhanced degradation of the substrate by most fungi. For growth on plasterboard, no typical metabolites were detected. Despite these metabolite differences on malt extract agar, wallpaper and plasterboard, some molds also produced specific compounds independently of the used substrate, such as trichodiene from Fusarium sporotrichioides and aristolochene from Penicillium roqueforti. Therefore, these metabolites can be used as markers for the identification and maybe also mycotoxin production of these molds. All five investigated Penicillium spp. in this study were able to produce two specific diterpenes, which were not produced by the other species studied. These two compounds, which remain unidentified until now, therefore seem specific for Penicillium spp. and are potentially interesting for the monitoring of this fungal genus. Further experiments will be performed with other Penicillium spp. to study the possibility that these two compounds are specific for this group of molds.     

Bio-tarp alternative daily cover prototypes for methane oxidation atop open landfill cells

Final landfill covers are highly engineered to prevent methane release into the atmosphere. However, methane production begins soon after waste placement and is an unaddressed source of emissions. The methane oxidation capacity of methanotrophs embedded in a “bio-tarp” was investigated as a means to mitigate methane release from open landfill cells. The bio-tarp would also serve as an alternative daily cover during routine landfill operation.Evaluations of nine synthetic geotextiles identified two that would likely be suitable bio-tarp components. Pilot tarp prototypes were tested in continuous flow systems simulating landfill gas conditions. Multilayered bio-tarp prototypes consisting of alternating layers of the two geotextiles were found to remove 16% of the methane flowing through the bio-tarp. The addition of landfill cover soil, compost, or shale amendments to the bio-tarp increased the methane removal up to 32%. With evidence of methane removal in a laboratory bioreactor, prototypes were evaluated at a local landfill using flux chambers installed atop intermediate cover at a landfill. The multilayered bio-tarp and amended bio-tarp configurations were all found to decrease landfill methane flux; however, the performance efficacy of bio-tarps was not significantly different from controls without methanotrophs. Because highly variable methane fluxes at the field site likely confounded the test results, repeat field testing is recommended under more controlled flux conditions.     

Rotary drum soil blending for source zone remediation: Various application scenarios

Mechanical blending of contaminated soil with amendments has recently reemerged as an important treatment technology. From its original application using large‐diameter augers in the early 1990s to the current use of rotary drum blenders, soil blending is being used as an alternative to other remediation technologies like amendment injection and soil vapor and groundwater extraction. Shallow (approximately 10 m below ground surface [bgs] or less) soil blending also offers an alternative to excavation and disposal. Soil blending has been used to remediate a site with various contaminants including, but not limited to, chlorinated solvents, petroleum, and metals. The types of soils susceptible to soil blending vary from sands and gravels to silts and clays to fractured rock and combinations of all of these. The types of amendments blended include oxidants, reducing agents, biological enhancements, and stabilizing amendments. Soil blending systems deliver the power to the mixing head to adequately mix the soil and amendment to enhance remediation effectiveness. Since long‐term contamination is often a result of heterogeneously distributed residual contaminant in localized source zones that are difficult to access, the typical aim of soil blending is to homogenize the soil while effectively distributing amendment to these zones made accessible by blending. By effectively homogenizing the soil, however, soil blending will increase the void ratio and disrupt the shear strength and bearing capacity of the soil so an important component of a soil blending technology is proper recovery of these geotechnical parameters. This can be achieved by using well‐known soil improvement techniques such as amending all or a portion of the blended area with Portland cement or lime. Several case studies of soil blending treatments of different contaminants and amendments in various soil types are provided.     

Analysis of bacterial activity, biomass and diversity during windrow composting

Two contrasting compost windrows were monitored for various physical, chemical and microbiological parameters for a period of 106 days. The different input materials and management practises gave rise to different temperature, moisture, and oxygen consumption profiles as composting proceeded. However, despite the different composting conditions, the specific respiratory activity, as determined by oxygen consumption per bacterial cell, was remarkably similar for both windrows. Further investigations into diversity dynamics were done through DGGE and cloning and sequencing of bacterial 16S rDNA PCR products. Although sequence analysis showed differing bacterial communities across time and between the different windrows, similarities in the progression were noted. The majority of sequences recovered from the first sampling period (day 1) were highly similar to previously isolated organisms. The clone libraries from the last sampling period (day 106) contained organisms that showed lower homology to their closest relatives, often with other uncultured organisms, and in phyla that contain few cultured representatives. These data suggest that specific respiratory activity may be an important driver of bacterial diversity in composting environments.     

Selective accumulation of mycosporine-like amino acids in ovaries of the green sea urchin Strongylocentrotus droebachiensis is not affected by ultraviolet radiation

Field sampling and laboratory experiments examined whether ultraviolet radiation (UVR) affects the reproduction or the accumulation of mycosporine-like amino acids (MAAs) and ascorbic acid in ovaries of the green sea urchin Strongylocentrotus droebachiensis (Müller). Ovaries of sea urchins sampled across a depth gradient (0.5–10 m) in March 1998 did not differ in their gonadal index, or in concentrations of MAAs, or ascorbic acid. Concentrations of MAAs and ascorbic acid in ovaries were higher in sea urchins collected from a kelp bed compared with those collected from a community of crustose coralline algae. The concentrations of MAAs in ovaries varied seasonally, peaking in March, when sea urchins had high gonadal indices just before spawning. Ovaries of sea urchins maintained on controlled diets from October 1997 to April 1998 accumulated significantly higher concentrations of MAAs when fed a diet rich in MAAs than did ovaries of sea urchins fed an alga lacking MAAs, but the gonadal indices did not differ between diets. Sea urchins accumulated principally one MAA, shinorine, but not others that were available in high concentrations in their diet. Neither the gonadal index nor the ovarian concentrations of MAAs were affected by daily exposure of adult urchins to UVR for 6 months. Concentrations of ascorbic acid in ovaries did not differ among diets or UV-treatments. The percentages of nutritive phagocytes and gametic cells were not affected by diet or UVR, and did not co-vary with concentrations of MAAs or ascorbic acid in ovaries. These data support previous demonstrations that female sea urchins accumulate MAAs from their diet of macroalgae, but further show that the accumulation is selective for specific MAAs, particularly shinorine, and that adult S. droebachiensis do not accumulate MAAs in their ovaries or eggs in response to UV-exposure. These are also the first experimental studies to address whether MAAs are affected by or regulate gametogenesis, and indicate that they do not. Received: 5 May 2000 / Accepted: 29 September 2000     

Climatic risks and impacts in South Asia: extremes of water scarcity and excess

Regional Environmental Change - This paper reviews the current knowledge of climatic risks and impacts in South Asia associated with anthropogenic warming levels of 1.5–4 °C...     

Long-Term Biological Monitoring of an Impaired Stream: Synthesis and Environmental Management Implications

The long-term ecological recovery of an impaired stream in response to an industrial facility’s pollution abatement actions and the implications of the biological monitoring effort to environmental management is the subject of this special issue of Environmental Management. This final article focuses on the synthesis of the biological monitoring program’s components and methods, the efficacy of various biological monitoring techniques to environmental management, and the lessons learned from the program that might be applicable to the design and application of other programs. The focus of the 25-year program has been on East Fork Poplar Creek, an ecologically impaired stream in Oak Ridge, Tennessee with varied and complex stressors from a Department of Energy facility in its headwaters. Major components of the long-term program included testing and monitoring of invertebrate and fish toxicity, bioindicators of fish health, fish contaminant accumulation, and instream communities (including periphyton, benthic macroinvertebrate, and fish). Key parallel components of the program include water chemistry sampling and data management. Multiple lines of evidence suggested positive ecological responses during three major pollution abatement periods. Based on this case study and the related literature, effective environmental management of impaired streams starts with program design that is consistent across space and time, but also adaptable to changing conditions. The biological monitoring approaches used for the program provided a strong basis for assessments of recovery from remedial actions, and the likely causes of impairment. This case study provides a unique application of multidisciplinary and quantitative techniques to address multiple and complex regulatory and programmatic goals, environmental stressors, and remedial actions.