Monitoring and identification of airborne asbestos in unorganized sectors, India

Rajasthan state in India is credited to cater more than 90% of total production of asbestos in this country, of which around 60% is processed there in unorganized sectors including milling and manufacturing of asbestos-based products. Unorganized asbestos units particularly mills showed unhealthy occupational conditions, therefore industrial hygiene study was carried out focusing on the prevalence of asbestos fibres in air at work zone area of asbestos milling units. Fibre levels were in the range of 2.00-5.09f/cm(3) and 4.07-15.60f/cm(3) in unorganized asbestos mills of Rajasthan located at Beawer and Deogarh districts, respectively. Like asbestos concentration, fibre type and length are also vital factors in the health risk assessment of industrial workers. Phase contrast and polarized light microscopic study of asbestos fibres showed their amphibole nature registering about 90% as tremolite and rest as anthophyllite. Fibre length measured micrometrically were sub-grouped in <10microm, 11-20microm, 21-30microm and >30microm. About 30-40% fibres belonged to sub-group <10microm. It is concluded that unorganized asbestos mills bear poor industrial unhygienic conditions reflected specifically from their manyfold higher fibre concentrations than the Indian and International standards. Poor industrial unhygienic conditions are attributable to obsolete milling technology, lack of pollution control devices and escape from regulatory control.     

Characterization of tannery effluent wastewater by proton-induced X-ray emission (PIXE) analysis to investigate their role in water pollution

Introduction  

Over the last few decades, the chromium-based tanning industry has shown rapid growth in Pakistan. However, the rules and regulations promulgated by the government are not strictly followed for processing the effluent discharge from the tanneries. Consequently, tannery effluents have become a great source of water pollution in surrounding areas.     

Cadmium-tolerant bacteria induce metal stress tolerance in cereals

Cadmium usually hampers plant growth, but bacterial inoculation may improve stress tolerance in plants to Cd by involving various mechanisms. The objective was to characterize and identify bacteria that improve plant growth under Cd stress and reduce Cd uptake. Cadmium-tolerant bacteria were isolated from rhizosphere soil, which was irrigated with tannery effluent, and six strains were selected as highly tolerant to Cd, showing minimum inhibitory concentration as 500 mg L^?1 or 4.45 mmol L^?1. These strains were identified by 16S rRNA gene analysis and functional analysis in regard to plant growth promotion characteristics. To determine their effect on cereal growth under Cd stress, seeds were inoculated with these strains individually and grown in soil contaminated with three Cd levels (0, 40 and 80 mg kg^?1). Biomass production, relative water content (RWC), electrolyte leakage (ELL) and tissue Cd concentration were measured. Biomass of both cereals was inhibited strongly when exposed to Cd; however, bacterial inoculation significantly reduced the suppressive effect of Cd on cereal growth and physiology. The bacterial isolates belonged to the genera Klebsiella, Stenotrophomonas, Bacillus and Serratia. Maize was more sensitive than wheat to Cd. Klebsiella sp. strain CIK-502 had the most pronounced effects in promoting maize and wheat growth and lowering Cd uptake under Cd stress.     

An integrated assessment of seawater intrusion in a small tropical island using geophysical,geochemical, and geostatistical techniques

In this study, geophysics, geochemistry, and geostatistical techniques were integrated to assess seawater intrusion in Kapas Island due to its geological complexity and multiple contamination sources. Five resistivity profiles were measured using an electric resistivity technique. The results reveal very low resistivity <1 Ωm, suggesting either marine clay deposit or seawater intrusion or both along the majority of the resistivity images. As a result, geochemistry was further employed to verify the resistivity evidence. The Chadha and Stiff diagrams classify the island groundwater into Ca-HCO₃, Ca-Na-HCO₃, Na-HCO₃, and Na-Cl water types, with Ca-HCO₃ as the dominant. The Mg²⁺/Mg²⁺+Ca²⁺, HCO₃ ^?/anion, Cl^?/HCO₃ ^?, Na⁺/Cl^?, and SO₄ ^2?/Cl^? ratios show that some sampling sites are affected by seawater intrusion; these sampling sites fall within the same areas that show low-resistivity values. The resulting ratios and resistivity values were then used in the geographical information system (GIS) environment to create the geostatistical map of individual indicators. These maps were then overlaid to create the final map showing seawater-affected areas. The final map successfully delineates the area that is actually undergoing seawater intrusion. The proposed technique is not area specific, and hence, it can work in any place with similar completed characteristics or under the influence of multiple contaminants so as to distinguish the area that is truly affected by any targeted pollutants from the rest. This information would provide managers and policy makers with the knowledge of the current situation and will serve as a guide and standard in water research for sustainable management plan.     

Enhancing transverse mixing in streams with submerged vanes

In order to maintain the water quality of moving streams, it is essential to know the process of pollutant mixing. The transverse mixing is very important which is needed to be modeled to understand mixing phenomenon. It was observed that transverse mixing is a strong function of secondary currents, thus, submerged vanes, which are aerofoil skewed at angle of 10°–40° with respect to flow, generate transverse circulations that can be utilized to induce secondary currents in the flow to enhance transverse mixing. Present study is an attempt to utilize submerged vanes as an instrument to enhance the transverse mixing by incorporating various vane configurations. In order to study the effect of vane generated circulations on transverse mixing, experimentations were conducted on three vane sizes and for various row arrangements of vanes attached to bed. An attempt is made to investigate the effect of submerged vane size and rows on transverse velocity, concentration profile and transverse mixing coefficient. It was observed by measurement of concentration profile that transverse mixing was more enhanced for submerged vanes of higher height. It was also observed that as the number of rows is proportional to the transverse mixing. By measuring the transverse velocity profile, it was observed that more and more fluid was advected in transverse direction for higher rows of vanes. By utilizing the observed transverse mixing coefficients, number of vane rows and relative height of vane, a predictor was derived to predict transverse mixing coefficient in the presence of submerged vane rows. It was observed that the derived predictor shows a fair amount of agreement in the result predicted.     

Heavy metal phytoextraction—natural and EDTA-assisted remediation of contaminated calcareous soils by sorghum and oat

The abilities of sorghum (Sorghum bicolor L.) and oat (Avena sativa L.) to take up heavy metals from soils amended with ethylenediaminetetraacetic acid (EDTA) were assessed under greenhouse conditions. Both plants were grown in two soils contaminated with heavy metals (Gujranwala—silty loam and Pacca—clay loam). The soils were treated with 0, 0.625, 1.25, and 2.5 mM EDTA kg^?1 soil applied at both 45 and 60 days after sowing (DAS); the experiment was terminated at 75 DAS. Addition of EDTA significantly increased concentrations of Cd, Cr, and Pb in roots and shoots, and bio-concentration factors and phytoextraction rates were also increased. Post-harvest soil analysis showed that soluble fractions of metals were also increased significantly. The increase in Cd was ≈ 3-fold and Pb was ≈ 15-fold at the highest addition of EDTA in Gujranwala soil; in the Pacca soil, the increase was less. Similarly, other phytoremediation factors, such as metal translocation, bio-concentration factor, and phytoextraction, efficiency were also maximum when soils were treated with 2.5 mM EDTA kg^?1 soil. The study demonstrated that sorghum was better than oat for phytoremediation.     

Removing ammonia from air with a constant pH,slightly acidic water spray wet scrubber using recycled scrubbing solution

Slightly acidic solutions are a practical means of removing ammonia from air Scrubbed NH₃ accumulates in solution as NH₄⁺ and should be an excellent fertilizer Increased air velocity decreased NH₃ removal and increased NH₄⁺ collection Previous research on wet scrubbers has only studied highly acidic scrubbing solutions because of their high ammonia capture efficiencies; however, the high acidity created practical problems. Lower acidity solutions would reduce corrosion, maintenance, and cost; however, designers may need to use strategies for increasing scrubber effectiveness, such as using lower air velocities. The objective of this study was to determine if a spray scrubber with slightly acidic and higher pH scrubbing solution (pH from 2 to 8) could effectively remove NH₃ from NH₃ laden air (such as animal building exhaust air), and also collect this valuable resource for later use as a fertilizer. A bench-scale spray wet scrubber treated 20 ppmv NH₃/air mixture in a countercurrent contact chamber. First, the solution pH was varied from 2 to 8 while maintaining constant air velocity at 1.3 m·s⁻¹. Next, air velocity was increased (2 and 3 m·s⁻¹) while solution pH remained constant at pH6. At 1.3 m·s⁻¹, NH₃ removal efficiencies ranged between 49.0% (pH8) and 84.3% (pH2). This study has shown that slightly acidic scrubbing solutions are a practical means of removing ammonia from air especially if the scrubber is designed to increase collisions between solution droplets and NH₃ molecules. The NH₃ removed from the air was held in solution as NH₄⁺ and accumulates over time so the solution should be an excellent fertilizer.     

Clean electrochemical deposition of calcium carbonate to prevent scale formation in cooling water systems

Calcium carbonate (CaCO₃) deposited in water systems leads to scale formation, decreases flow rate, reduces heat transfer and favors microbial proliferation of toxic bacteria such as Legionella. This issue may be solved by electrochemical deposition, without adding toxic chemicals. Therefore, we studied here the deposition of CaCO₃ by electrochemical reduction of oxygen into hydroxide ions with stainless steel and titanium (Ti) working electrodes. Analysis was done using cyclic voltammetry, chronoamperometry, dynamic impedance spectroscopy, scanning electron microscopy, and energy-dispersive X-ray spectroscopy (EDX) coupled with X-ray diffraction (XRD). Results show that optimal formation of CaCO₃ is done at ?1.2 V with the stainless steel electrode and at ?1.4 V for the Ti electrode. More negative potentials induce the formation of calcite. Using the Ti electrode, we found that aragonite is the major form (82 %), with only one capacitive loop. Using the stainless steel electrode at 1.2 V, we found 47 % of aragonite and 38 % of calcite. Overall, our findings demonstrate the feasibility of the electrochemical deposition of CaCO₃ in cooling water systems, without the addition of any chemical.     

Petroleum contaminated soil in Oman: Evaluation of bioremediation treatment and potential for reuse in hot asphalt mix concrete

This paper presents a study that aims at evaluating the leaching characteristics of petroleum contaminated soils as well as their application in hot mix asphalt concrete. Soil samples are environmentally characterized in terms of their total heavy metals and hydrocarbon compounds and leachability. The total petroleum hydrocarbon (TPH) present in the PCS before and after treatment was determined to be 6.8% and 5.3% by dry weight, indicating a reduction of 1% in the TPH of PCS due to the current treatment employed. Results of the total heavy metal analysis on soils indicate that the concentrations of heavy metals are lower when extraction of the soil samples is carried out using hexane in comparison to TCE. The results show that the clean soils present in the vicinity of contaminated sites contain heavy metals in the following decreasing order: nickel (Ni), followed by chromium (Cr), zinc (Zn), copper (Cu), lead (Pb), and vanadium (V). The current treatment practice employed for remediation of the contaminated soil reduces the concentrations of nickel and chromium, but increases the concentrations of all remaining heavy metals.     

Radiological impacts of phosphogypsum

This study was carried out to assess the radiological impact of Syrian phosphogypsum (PG) piles in the compartments of the surrounding ecosystem. Estimating the distribution of naturally occurring radionuclides (i.e. (226)Ra, (238)U, (232)Th, (210)Po and (210)Pb) in the raw materials, product and by-product of the Syrian phosphate fertilizer industry was essential. The data revealed that the concentrations of the radionuclides were enhanced in the treated phosphate ore. In PG, (226)Ra content had a mean activity of 318 Bq kg(-1). The uranium content in PG was low, ca. 33 Bq kg(-1), because uranium remained in the phosphoric acid produced. Over 80% of (232)Th, (210)Po and (210)Pb present partitioned in PG. The presence of PG piles did not increase significantly the concentration of (222)Rn or gamma rays exposure dose in the area studied. The annual effective dose was only 0.082 mSv y(-1). The geometric mean of total suspended air particulates (TSP) ca. 85 μg m(-3). The activity concentration of the radionuclides in filtrates and runoff waters were below the detection limits (ca. 0.15 mBq L(-1) for (238)U, 0.1 mBq L(-1) for (232)Th and 0.18 mBq L(-1) for both of (210)Po and (210)Pb); the concentration of the radionuclides in ground water samples and Qattina Lake were less than the permissible limits set for drinking water by the World Health Organisation, WHO, (10, 1 and 0.1 Bq L(-1) for (238)U, (232)Th and both of (210)Po and (210)Pb, respectively). Eastern sites soil samples of PG piles recorded the highest activity concentrations, i.e. 26, 33, 28, 61 and 40 Bq kg(-1) for (226)Ra, (238)U, (232)Th, (210)Po and (210)Pb, respectively, due to the prevailing western and north-western wind in the area, but remained within the natural levels reported in Syrian soil (13-32 Bq kg(-1) for (226)Ra, 24.9-62.2 Bq kg(-1) for (238)U and 10-32 Bq kg(-1) for (232)Th). The impact of PG piles on plants varied upon the plant species. Higher concentrations of the radionuclides were recorded for grass in comparison to broad-leaved plants. Among the species that grow naturally on PG piles, Inula, Ecballium and Polygonium may be radionuclides accumulators. A determined effort is needed at a national level to achieve a common and coherent approach to regulate PG piles or to consider it a resource material rather than waste or residue.