Red-list status and extinction risk of the world's whales,dolphins, and porpoises

To understand the scope and scale of the loss of biodiversity, tools are required that can be applied in a standardized manner to all species globally, spanning realms from land to the open ocean. We used data from the International Union for the Conservation of Nature Red List to provide a synthesis of the conservation status and extinction risk of cetaceans. One in 4 cetacean species (26% of 92 species) was threatened with extinction (i.e., critically endangered, endangered, or vulnerable) and 11% were near threatened. Ten percent of cetacean species were data deficient, and we predicted that 2–3 of these species may also be threatened. The proportion of threatened cetaceans has increased: 15% in 1991, 19% in 2008, and 26% in 2021. The assessed conservation status of 20% of species has worsened from 2008 to 2021, and only 3 moved into categories of lesser threat. Cetacean species with small geographic ranges were more likely to be listed as threatened than those with large ranges, and those that occur in freshwater (100% of species) and coastal (60% of species) habitats were under the greatest threat. Analysis of odontocete species distributions revealed a global hotspot of threatened small cetaceans in Southeast Asia, in an area encompassing the Coral Triangle and extending through nearshore waters of the Bay of Bengal, northern Australia, and Papua New Guinea and into the coastal waters of China. Improved management of fisheries to limit overfishing and reduce bycatch is urgently needed to avoid extinctions or further declines, especially in coastal areas of Asia, Africa, and South America.     

A Preliminary Evaluation of the DDT Contamination of Sediments in Lakes Natron and Bogoria (Eastern Rift Valley,Africa)

Dichlorodiphenyltrichloroethane (DDT) is still used in Africa for the indoor control of malaria and it may represent a potential hazard for wildlife. The littoral sediments of two alkaline-saline lakes, Natron (Tanzania) and Bogoria (Kenya), in the Eastern Rift Valley, supporting large populations of lesser flamingos (Phoeniconaias minor), were analysed for DDT residues. Physical–chemical analyses (temperature, conductivity, pH and dissolved oxygen) were also performed on the water of the two lakes and in the tributaries of Lake Natron, to evaluate the influence of the environmental variables on pollutant occurrence. At Lake Natron, around 1 km from the sediment collection sites, tree leaves of Acacia tortilis were also collected. The main metabolite found in all sediment samples was pp’DDE, whilst equal concentrations of pp’DDT and pp’DDE were measured in acacia leaves. The levels of DDTs measured in the sediments were within 5.9–30.9 ng g⁻¹ d.w., reaching the maximum value in a tributary of Lake Natron. On the whole, the contamination of Lake Natron and Lake Bogoria basins seems to be quite moderate. Nevertheless, the pp’DDE/pp’DDT ratio equals 1 in the Acacia tortilis leaves, which makes one suppose that the input of the parent compound was rather recent and could have been from aerial transport or dust from relatively close-by old pesticides storage sites.     

Comparative assessment of metribuzin sorption efficiency of biochar,hydrochar and vermicompost

Abstract

In this study, we used two biochars (BC) produced from grapevine pruning residues (BCgv) and red spruce wood (BCrs), two hydrochars (HC) from urban pruning residues (HCup) and the organic fraction of municipal solid wastes (HCuw), and two vermicomposts (VC) obtained vermicomposting digestates from buffalo manure (VCbm) and mixed feedstock (VCmf). Adsorption kinetics and isotherms of metribuzin onto these materials were performed. Sorption kinetics followed preferentially a pseudo-second-order model, thus indicating the occurrence of chemical interactions between the sorbate and the adsorbents. Adsorption constants were calculated using the Freundlich and Langmuir models. Metribuzin sorption data on BCgv and both HC fitted preferentially the Freundlich equation, whereas on the other materials data fitted both isotherms well (r?>?0.95). Metribuzin sorption capacity of the materials followed the trend BC?>?HC?>?VC. Sorption constants of metribuzin normalised per organic carbon content (K_OC) on BCgv, BCrs, HCup, HCuw, VCbm and VCmf were 561, 383, 251, 214, 102 and 84?L kg^?1, respectively. A significant positive correlation (P?=?0.016) was calculated between distribution coefficients (K_d) of all materials and the corresponding organic carbon contents, thus indicating a prominent role of the organic fraction of these materials in the adsorption of metribuzin.     

Life cycle energy and CO2 emissions analysis of food packaging: an insight into the methodology from an Italian perspective

Packaging is strictly connected to environmental issues as it is a product characterised by high material consumption rate; it is often transported over long distances and has a short life. Providing environmental analysis is, therefore, urgent to identify energy and resources efficient solutions. The paper, taking advantage of a real case study, presents a life cycle-based comparative analysis among three different food packaging systems. The paper compares the life cycle of tin steel, polypropylene and glass-based packaging of an Italian preserves producer. The analysis leads to the conclusion that, for the baseline scenario, polypropylene packaging represents the greenest solution, whereas glass packaging is the worst choice. The paper presents a scenario analysis varying both the method used for accounting for recycling as well as the recycling rates of the packaging materials. Changes in overall results with parameters analysis changing are calculated and highlighted throughout the paper. The impact of a reuse policy of the glass-based solution is also analysed; a model for disposable glass packaging is proposed and the obtained results are compared with the single use polypropylene and tin steel-based packaging. In order to analyse the impact of different End of Life scenarios on the present case study, collecting as well as recycling rates of some European countries have been used. The results revealed a significant fluctuation both in energy consumption and in CO₂ emission as the nation changes. Summing up, a methodology for packaging environmental impact analysis is applied to a real case study, some crucial aspects of the methodology have been analysed in depth in order to give a contribution in packaging environmental impact analysis.     

HEAVY METAL DISTRIBUTION AND SPECIATION IN THE NORTHERN ADRIATIC SEA

In the present study the concentrations of cobalt, copper, iron, manganese, zinc were analysed and the speciation of copper and zinc performed, with a summer and winter sampling, for two areas in the Northern Adriatic Sea and crossing at the farthest zones of the Po river-sea water interface. Results show that when salinity increases the concentrations of all investigated metals (with the exception of cobalt) present some degree of biogeochemical cycling. Copper is the element whose dissolved phase has the highest importance in metal transport across the salinity gradient. Results of speciation analysis demonstrate that the presence of excess amounts (5-8 fold) of unbound ligands confers a buffering capacity for potential inputs of dissolved metals into the Northern Adriatic Sea. The speciation of both copper and zinc in the dissolved phase was dominated by organic complexation.     

Heavy metal removal from industrial effluents by sorption on cross-linked starch: chemical study and impact on water toxicity

Batch sorption experiments using a starch-based sorbent were carried out for the removal of heavy metals present in industrial water discharges. The influence of contact time, mass of sorbent and pollutant load was investigated. Pollutant removal was dependent on the mass of sorbent and contact time, but independent of the contaminant load. The process was uniform, rapid and efficient. Sorption reached equilibrium in 60 min irrespective of the metal considered (e.g. Zn, Pb, Cu, Ni, Fe and Cd), reducing concentrations below those permitted by law. The material also removed residual turbidity and led to a significant decrease in the residual chemical oxygen demand (COD) present in the industrial water discharge. The germination success of lettuce (Lactuca sativa) was used as a laboratory indicator of phytotoxicity. The results show that the sorption using a starch-based sorbent as non-conventional material, is a viable alternative for treating industrial wastewaters.     

Waste tyre rubberized concrete: Properties at fresh and hardened state

The main objective of this paper is to investigate the properties of various concrete mixtures at fresh and hardened state, obtained by a partial substitution of coarse and fine aggregate with different volume percentages of waste tyres rubber particles, having the same dimensions of the replaced aggregate. Workability, unit weight, compressive and flexural strength and post-cracking behaviour were evaluated and a comparison of the results for the different rubcrete mixtures were proposed in order to define the better mix proportions in terms of mechanical properties of the rubberized concrete. Results showed in this paper were also compared to data reported in literature. Moreover, a preliminary geometrical, physical and mechanical characterization on scrap tyre rubber shreds was made.The rubberized concrete mixtures showed lower unit weight compared to plain concrete and good workability. The results of compressive and flexural tests indicated a larger reduction of mechanical properties of rubcrete when replacing coarse aggregate rather than fine aggregate. On the other hand, the post-cracking behaviour of rubberized concrete was positively affected by the substitution of coarse aggregate with rubber shreds, showing a good energy absorption and ductility indexes in the range observed for fibrous concrete, as suggested by standard (ASTM C1018-97, 1997).     

Safety management systems: Performance differences between adopters and non-adopters

The aim of this paper is to assess, through an empirical investigation, whether the performance of safety management systems (SMSs) adopting and non-adopting companies statistically differ. To achieve such aim, empirical data were collected on a sample of 116 companies, encompassing both SMSs adopters and non-adopters. Hypotheses testing was performed to assess whether SMSs adopters experience significantly higher performance against (i) definition of safety and security goals and their communication to employees; (ii) risk data updating and risk analysis; (iii) identification of risks and definition of corrective actions; (iv) employees training. Results show that companies adopting SMSs exhibit higher performance against all the topics identified. These outcomes could be the starting point for providing empirical evidence of benefits achievable thanks to SMSs implementation.     

Serum concentrations of persistent organic pollutants (POPs) in the inhabitants of a Sicilian city

Background

Polychlorinated biphenyls (PCBs) and organochlorine pesticides are common environmental contaminants that have been associated with human health problems.

Objectives

To assess serum concentrations of several organochlorine contaminants in general population living in a city with an ancient agricultural tradition and to identify possible exposure sources in Sicily.

Methods

A cross-sectional study was conducted on 101 individuals. Each participant answered a face-to-face questionnaire submitted by well-trained personnel and provided a serum sample which was analyzed for the concentrations of PCBs, HCB, HCHs and DDTs by using gas-chromatography coupled with mass spectrometry.

Results

HCB, p,p′-DDE, PCB 138, PCB 153 and PCB 180 were detected in more than 80% of the study participants. The ng g⁻¹ lipid median concentrations were: 18.6 for HCB; 175.1 for p,p′-DDE; 22. for PCB 138; 32.5 for PCB 153 and 23.0 for PCB 180. PCB 153 and PCB 138, PCB 138 and PCB 180, PCB 153 and PCB 180, and p,p′-DDE and HCB showed a high correlation each other (p < 0.05). HCB and p,p′-DDE concentrations were significantly higher in subjects >49 years old (adj-p = 0.03 in 50-69 years old and adj-p < 0.001 in >69 years old, respectively) whereas PCB 138, PCB 153 and PCB 180 concentrations were higher in males (adj-p = 0.03), in subjects >69 years old (adj-p = 0.04) and in current smokers (adj-p = 0.04).

Conclusions

The present study shows that serum concentrations of organochlorine compounds detected in subjects living in a small Sicilian city with ancient agricultural tradition are similar to those found in subjects living in urban areas of other countries. However, further investigations are needed to compare data from rural/urban areas in the same country, assessing correlations between serum concentrations of several chemical compounds and potential health effects in general population.     

A new generation of coastal monitoring platforms

The need for new instruments and systems for environment monitoring encouraged the development of a network of coastal platforms combining a high versatility with ease of use and affordability. Almost every instrument can be fitted on the platforms, thanks to the large amount of available power provided by both solar panels and wind generators. All the platforms host a pumping system that pumps water from five depths into a measurement chamber where a multiparametric probe is fitted and from where other devices (e.g. samplers or analysers) can draw samples. In situ temperature measurements are provided at the same pumping depths. A colorimetric nutrient analyser and a meteorological station complete the basic equipment. On one of the platforms, a remotely controlled water sampler and an ADCP are also fitted. The data-acquisition and transmission system enables the platform to be controlled remotely using a special macro-commands set. Several examples of use are presented.