Climate change and forests in India: adaptation opportunities and challenges

Climate change is projected to lead to shift of forest types leading to irreversible damage to forests by rendering several species extinct and potentially affecting the livelihoods of local communities and the economy. Approximately 47% and 42% of tropical dry deciduous grids are projected to undergo shifts under A2 and B2 SRES scenarios respectively, as opposed to less than 16% grids comprising of tropical wet evergreen forests. Similarly, the tropical thorny scrub forest is projected to undergo shifts in majority of forested grids under A2 (more than 80%) as well as B2 scenarios (50% of grids). Thus the forest managers and policymakers need to adapt to the ecological as well as the socio-economic impacts of climate change. This requires formulation of effective forest management policies and practices, incorporating climate concerns into long-term forest policy and management plans. India has formulated a large number of innovative and progressive forest policies but a mechanism to ensure effective implementation of these policies is needed. Additional policies and practices may be needed to address the impacts of climate change. This paper discusses an approach and steps involved in the development of an adaptation framework as well as policies, strategies and practices needed for mainstreaming adaptation to cope with projected climate change. Further, the existing barriers which may affect proactive adaptation planning given the scale, accuracy and uncertainty associated with assessing climate change impacts are presented.     

Manganese and iron oxide immobilized activated carbons precursor to dead biomasses in the remediation of cadmium-contaminated waters

The aim of the present investigation was to exploit the high specific surface area of activated carbons in immobilizing the manganese and iron oxides as to obtain a suitable, efficient and cost effective and environment benign wastewater treatment process in the remediation of cadmium-contaminated waters. The manganese and iron oxides were impregnated in situ onto the surface and pores of the activated carbons precursors to the rice hulls and areca nut wastes. The solids were characterized with the help of Fourier transform infrared spectroscopy and X-ray diffraction analytical data, and the BET specific surface area as obtained. The surface morphology of these solids was discussed with the help of scanning electron microscopic images. The activated carbon samples along with the manganese and iron immobilized activated carbons were further employed in the batch and column reactor operations in the remediation of cadmium-contaminated waters. The batch data showed that an increase in sorptive pH from 2.0 to 10.0 and concentration from 1.0 to 20 mg/L favoured the uptake of cadmium by these solids. Moreover, the 1,000 times increase in background electrolyte concentrations NaNO₃ caused an insignificant decrease in cadmium uptake by these solids, which inferred that sorbing ions/species were sorbed specifically and forming ‘inner-sphere’ complexes onto the solid surface. The concentration dependence data were utilized to model various adsorption isotherms and indicated that Freundlich adsorption isotherm was reasonably fitted well. The kinetic data was fitted well to the pseudo-second-order rate equations; hence, the equilibrium sorption capacity was estimated. Furthermore, the dynamic experiments carried out by the column experiments and the breakthrough data were fitted well to the non-linear Thomas equations; accordingly, the loading capacity of the column was estimated. Iron or manganese immobilized activated carbons showed relatively higher loading capacity compared to its precursor activated carbons hence showing its possible implication in the remediation processes. Moreover, among these modified ACs, IIAC showed higher removal capacity than the MIAC solid.     

Towards the Prediction of Heat and Mass Transfer in an Air-Conditioned Environment for a Life Support System in Space

Long-term flights or the establishment of permanent bases in space provide serious challenges for life support systems. Plants are essential companion life forms for such space missions, where human habitats must mimic the cycles of life on earth to generate and recycle food, oxygen and water. Nowadays, the chemical–mechanical recycling systems used in the international space station are much more compact, less labour intensive and more reliable than plant-based systems, but these systems would be too expensive for the long-term human exploration. In order to improve living conditions for humans and plants, we need an accurate characterisation of the mass transfer phenomena related to condensation of humid air. We are interested in developing an experimental protocol, which would help us to establish a theoretical model describing the heterogeneous transfers along a wall or a plant in an air-conditioned environment. Initially, we started in dry conditions by measuring the velocity profiles within the boundary layer that develop on a horizontal or a vertical flat plate in a wind tunnel. The velocity ranged from 0.5 to 2.5 m s^?1. Existing coupled heat and mass transfer measurement results relevant to our applications are discussed.     

Toxic effect of stem bark and leaf of Euphorbia hirta plant against freshwater vector snail Lymnaea acuminata

The aqueous stem bark and leaf extracts of plant Euphorbia hirta (family-Euphorbiaceae) have potent molluscicidal activity. Sub-lethal doses (40% and 80% of LC50) of aqueous stem bark and leaf extracts of this plant also significantly (P<0.05) alter the levels of total protein, total free amino acid, nucleic acids (DNA and RNA) and the activity of enzyme protease and acid and alkaline phosphatase in various tissues of the vector snail Lymnaea acuminata in time and dose dependent manner. Euphorbia hirta (family-Euphorbiaceae) commonly known as Dudhi, is a common medicinal plant of India, which is used in variety of diseases i.e. cough, asthma, colic, dysentery, genito urinary diseases.     

Thermal analysis of tilted wick solar distillation-cum-drying system

The performance of the designed tilted wick solar water distillation-cum-drying unit has been tested at water flow rates of 50 and 65 ml/min in the distillation unit. Effect of water flow rates on the heat transfer coefficients of distillation and drying unit for drying ginger has been evaluated. The energy and exergy efficiency of the distillation system have also been evaluated. Average distillates of 2.36 and 2.2 l/m² were collected from the tilted wick solar still at flow rates of 50 and 65 ml/min, respectively. Large variation in convective and evaporative heat transfer coefficients of distillation unit has been observed at given water flow rates. Water flow rate in the distillation unit significantly affects the performance of the drying unit. Average convective heat transfer coefficients of 6.56 and 3.75 W/m^{2 o}C have been observed for drying ginger at flow rates of 50 and 65 ml/min, respectively. Energy and exergy efficiency of the distillation unit have been found to be nearly 19% and 0.9%, respectively. Experimental uncertainty has also been evaluated for distillation and drying units. The distillate cost for the developed distillation-cum-drying unit is calculated as $0.03729/l along with dried ginger of about 2.5 kg/m²/day.     

Exergy analysis of the transcritical N2O refrigeration cycle with a vortex tube

In this article, a comparative study is presented for the transcritical cycle with expansion valve (TCEV) and transcritical cycle with vortex tube (TCVT) mainly based on the second law of thermodynamics. Natural refrigerant nitrous oxide (N₂O) is used in both the cycles for analysis. The evaporator and gas cooler temperatures are varied from ?55°C to 5°C and 35°C to 60°C, respectively. The effects of various operating and design parameters on the optimum heat rejection pressure, coefficient of performance (COP), exergy loss (irreversibility), and the exergetic efficiency are studied. Exergy analysis of each component in TCEV and TCVT is performed to identify the amount and locations of irreversibility. It is observed that the use of the vortex tube in place of the expansion valve reduces the total exergy losses and increases the exergetic efficiency as well as COP. The exergetic efficiency and COP of the TCVT are on average 10–12% higher compared to TCEV for the considered operating conditions. The computed values of the exergetic efficiency for TCVT using refrigerant N₂O are the highest at an evaporator temperature of ?55°C, and the corresponding values of exergetic efficiency and exergy losses varies between 25.35% and 15.67% and between 74.65% and 84.33%, respectively. However, COP at the same evaporator temperature of ?55°C varies between 0.83 and 0.51. Furthermore, the optimum heat rejection pressure in TCVT is lower compared to that in TCEV. The results offer significant help for the optimum design and operating conditions of TCVT with refrigerant N₂O.     

PM<Subscript>2.5</Subscript> pollution from household solid fuel burning practices in Central India: 2. Application of receptor models for source apportionment

USEPA’s UNMIX, positive matrix factorization (PMF) and effective variance-chemical mass balance (EV-CMB) receptor models were applied to chemically speciated profiles of 125 indoor PM_2.5 measurements, sampled longitudinally during 2012–2013 in low-income group households of Central India which uses solid fuels for cooking practices. Three step source apportionment studies were carried out to generate more confident source characterization. Firstly, UNMIX6.0 extracted initial number of source factors, which were used to execute PMF5.0 to extract source-factor profiles in second step. Finally, factor analog locally derived source profiles were supplemented to EV-CMB8.2 with indoor receptor PM_2.5 chemical profile to evaluate source contribution estimates (SCEs). The results of combined use of three receptor models clearly describe that UNMIX and PMF are useful tool to extract types of source categories within small receptor dataset and EV-CMB can pick those locally derived source profiles for source apportionment which are analog to PMF-extracted source categories. The source apportionment results have also shown three fold higher relative contribution of solid fuel burning emissions to indoor PM_2.5 compared to those measurements reported for normal households with LPG stoves. The previously reported influential source marker species were found to be comparatively similar to those extracted from PMF fingerprint plots. The comparison between PMF and CMB SCEs results were also found to be qualitatively similar. The performance fit measures of all three receptor models were cross-verified and validated and support each other to gain confidence in source apportionment results.     

Assessment of persistent organic pollutants in soil and sediments from an urbanized flood plain area

Polycyclic aromatic hydrocarbons (PAHs), organochlorine pesticides (OCPs) and phenolic compounds (PCs) are persistent organic compounds. Contamination of these potentially toxic organic pollutants in soils and sediments is most studied environmental compartments. In recent past, studies were carried out on PAHs, OCPs and PCs in various soils and sediments in India. But, this is the first study on these pollutants in soils and sediments from an urbanized river flood plain area in Delhi, India. During 2018, a total of fifty-four samples including twenty-seven each of soil and sediment were collected and analyzed for thirteen priority PAHs, four OCPs and six PCs. The detected concentration of ∑PAHs, ∑OCPs and ∑PCs in soils ranged between 473 and 1132, 13 and 41, and 639 and 2112 µg/kg, respectively, while their concentrations in sediments ranged between 1685 and 4010, 4.2 and 47, and 553 and 20,983 µg/kg, respectively. PAHs with 4-aromatic rings were the dominant compounds, accounting for 51 and 76% of total PAHs in soils and sediments, respectively. The contribution of seven carcinogen PAHs (7CPAHs) in soils and sediments accounted for 43% and 61%, respectively, to ∑PAHs. Among OCPs, p, p’-DDT was the dominant compound in soils, while α-HCH was found to be dominated in sediments. The concentrations of ∑CPs (chlorophenols) were dominated over ∑NPs (nitrophenols) in both the matrices. Various diagnostic tools were applied for the identification of their possible sources in soil and sediments. The observed concentrations of PAHs, OCPs and PCs were more or less comparable with the recently reports from various locations around the world including India. Soil quality guidelines and consensus-based sediment quality guidelines were applied for the assessment of ecotoxicological health effect.

     

Distribution of improved cook stoves: analysis of field experiments using strategic niche management theory

Close to three billion people globally and over 800 million in India are dependent on direct combustion of unprocessed solid biomass fuels in inefficient traditional mud stoves. Current cooking practices, besides causing serious health problems, are also being linked to emissions of climate change and pollution agents such as black carbon and ozone precursors. In India several initiatives have been taken up to tackle the problem but the present trajectory of limited technical and social change in cooking energy use is nonetheless persistent in rural areas. In order to develop and scale up alternative cooking technology options, we have analyzed, using the principles of strategic niche management, two projects implemented by The Energy and Resources Institute (TERI) in nine villages in India. The assessment, while highlighting reasons for stability of the current cooking regime, also points to triggers that can destabilize the regime. The focus is also on assessing the influence of protection in the form of subsidies on the process of transition. User preferences relating to social and technical aspects have been analyzed, pointing to forced draft cookstoves as the preferred option notwithstanding cost reductions to address affordability concerns. The assessment indicates that while it is critically important to understand and address the preferences of users and to improve the technology, scaling up will depend on stove cost reduction through further research. Creativity in effective financing schemes and support structures put in place by fostering public–private partnerships are also needed.     

Biomass-derived materials in the remediation of heavy-metal contaminated water: removal of Cadmium(II) and copper(II) from aqueous solutions

Manganese-coated activated carbon (MCAC) and activated carbon were used in batch experiments for the removal of cadmium(II) and copper(II). Results showed that uptake of Cd(II) and Cu(II) was unaffected by increases in pH (3.0 to 8.5) or concentration (1 to 20 mg/L). Increased ionic strength (from 0.001 to 1 M NaNO3), however, significantly affected the uptake of Cd(II); adsorption of Cu(II) was not affected. Freundlich adsorption isotherm results indicated that MCAC possessed higher sorption capacity than activated carbon. Second-order rate constants were found to be 0.0386 for activated carbon and 0.0633 g/mg x min for MCAC for Cd(II) and 0.0774 for AC and 0.1223 g/mg x min for MCAC for Cu(II). Column experiments showed that maximum sorption capacity of MCAC was 39.48 mg/g for Cu(II) and 12.21 mg/g for Cd(II).