Determination of dioxin concentrations in fish and seafood samples using a highly sensitive reporter cell line, DR-EcoScreen cells

There is a strong need for the development of relatively rapid and low-cost bioassays for the determination of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), and dioxin-like polychlorinated biphenyls (dl-PCBs) in environmental and food samples. In this study, we applied a reporter gene assay using DR-EcoScreen cells (DR-cell assay), which is highly sensitive to dioxins, to the determination of PCDD/Fs and dl-PCBs in fish and seafood samples. The PCDD/Fs and dl-PCBs were extracted from homogenated samples (10 g) of 30 fish and shellfish, purified by clean-up procedure using a multilayered silica gel column and an alumina column, and applied to DR-cell assay. Interestingly, the bioanalytical equivalent (BEQ) values obtained from the DR-cell assay [<0.1 ∼ 5.4 pg BEQ g⁻¹ wet weight (ww)] were closely correlated with the toxicity equivalent (TEQ) values from conventional high-resolution gas chromatography/high-resolution mass spectrometry (HRGC-HRMS) analysis (r² = 0.912), and the slope of regression line was 0.913. Therefore, we multiplied the BEQ values from the DR-cell assay by a conversion coefficient (1.095, the reciprocal of 0.913) to approximate the TEQ values from the HRGC-HRMS analysis. Furthermore, we used this DR-cell assay to perform a prescreening test of PCDD/Fs and dl-PCBs in 16 fish and seafood samples purchased from a supermarket, revealing that a sample from the fatty flesh of a bluefin tuna exceeded 8 pg TEQ g⁻¹ ww (the European Union-tolerance limit). Taken together, these results suggest that the DR-cell assay might be applicable as a rapid and low-cost prescreening method to determine dioxin levels in fish and seafood samples.     

International comparative study of 3R and waste management policy developments

Reduce, reuse, and recycle (3R) policies form the basis of waste management and global warming countermeasures globally, so we conducted a comparative study of 3R and waste management policies in the European Union (EU), USA, Korea, Japan, China, and Vietnam. An international workshop for 3R and waste management policymakers was held in Kyoto, Japan, and a bibliographic survey was also conducted to collect data. 3R policies are clearly given priority in the hierarchy of waste management in every country studied. Thermal recovery, which includes power generation from waste heat and methane gas collected from organic waste, is also a priority; this is consistent with the increased use of countermeasures to reduce greenhouse gas (GHG) emissions. In the EU, waste management is characterized by practical and effective 3R policies through the development of realistic regulations and by the policymakers??desire to simplify management systems. The policy ideal in China, however, is the development of a circular economy that targets reductions in the amount and hazardousness of waste. Limits on the number of final disposal sites, strategies for procuring resources, and GHG emission countermeasures are closely linked with 3R policies, and further development of 3R policies in parallel with such issues is expected.     

Thermal analysis of polyethylene glycol: evolved gas analysis with ion attachment mass spectrometry

The thermal decomposition of polyethylene glycol was investigated by using a technique combining evolved gas analysis (time-resolved pyrolysis) with ion-attachment mass spectrometry. This technique allows the detection of intact pyrolysis products and, therefore, offers the opportunity for direct real-time monitoring of thermal by-products. Unstable products can thus be detected; for instance, many highly reactive organic peroxides, such as CH₃OOH and HOCH₂OOH, were found in this study. Classification analysis revealed 10 major compositional formulas among the product species: C_nH_2n+2O, C_nH_2n+2O₂, C_nH_2n+2O₃, C_nH_2n+2O₄, C_nH_2n+2O₅, C_nH_2n+2O₆, C_nH_2n+2O₇, C_nH_2nO, C_nH_2nO₂, and HO(CH₂CH₂O)_nH ethylene glycol oligomers. The Li⁺ ion adduct mass spectra showed a characteristic profile in terms of both the appearance of unique components and the distribution of pyrolysis products. Among the products of the thermal decomposition of PEG, formaldehyde (HCHO) and organic peroxides were particularly interesting. Formaldehyde, one of the 10 most abundant products, is a known human carcinogen. The detection of peroxides suggests that they may form during the incineration of PEG, which may have important environmental implications. The existence of peroxide products may have implications for chemical evolution in incinerator systems.     

The simulation of long-range transport of ¹³⁷Cs from East Asia to Japan in 2002 and 2006

To evaluate the quantities of ¹³⁷Cs from past nuclear tests being transported to and deposited in Japan by naturally-occurring phenomena, the authors developed long-range transport models for ¹³⁷Cs considering Asian dust. The simulation using these models backed the observed recent increase of ¹³⁷Cs deposition along the coast of the Sea of Japan in early spring. For the sake of public safety, it is vital to ascertain whether an increase of radioactive deposition is caused by natural phenomena or a nuclear accident. The observations in recent years have suggested that dust and soil containing ¹³⁷Cs is transported from the regions around Inner Mongolia to Japan by the wind. In this paper, using observation data from the early spring of 2002 and 2006, the authors have found good agreement between the simulations and the measurements. The simulations reproduced the entrainment of ¹³⁷Cs and subsequent transport to Japan caused by strong winds associated with low pressure areas around the Inner Mongolian grasslands. The most likely cause of high-level ¹³⁷Cs deposition over northern Japan during March 2002 was ¹³⁷Cs associated with particles transported at low-altitude (1 km) and subjected to precipitation on the 22nd to 24th.     

A study on the self-assembly behavior of dark materials from molasses

We have previously demonstrated that dark materials (DM) in acidified molasses are effectively adsorbed to Amberlite XAD7HP resin and are eluted from the resin with 0.1 M sodium hydroxide. In this paper, we have characterized the self-assembly behavior of molasses DM by using dynamic and static light scattering in combination with isoelectric focusing and infrared absorption spectroscopy in order to better understand the resin adsorption mechanism. One of DM derivatives, X-G2, contained carboxyl and hydroxyl groups and had a weight-average molar mass of 9.39?×?10³ to 4.42?×?10⁴ at pH 2.1–11.5. The aggregates retained their spherical shape over the full pH range and the large gyration radius (66.4–80.0 nm) indicated that the inner structure was loosely packed. Furthermore, X-G2 had an isoelectric point of 1.8, and its density increased sharply at pH 5.9 and then approached a nearly constant value under alkaline conditions. In summary, the self-assembly processes of DM are controlled by intermolecular hydrogen-bonding and hydrophobic interactions. The aggregates adsorb to the resin through hydrophobic interactions and are eluted when excess carboxylate anions are generated.     

Atmospheric mercury emissions from waste combustions measured by continuous monitoring devices

Atmospheric mercury emissions have attracted great attention owing to adverse impact of mercury on human health and the ecosystem. Although waste combustion is one of major anthropogenic sources, estimated emission might have large uncertainty due to great heterogeneity of wastes. This study investigated atmospheric emissions of speciated mercury from the combustions of municipal solid wastes (MSW), sewage treatment sludge (STS), STS with waste plastics, industrial waste mixtures (IWM), waste plastics from construction demolition, and woody wastes using continuous monitoring devices. Reactive gaseous mercury was the major form at the inlet side of air pollution control devices in all combustion cases. Its concentration was 2.0–70.6 times larger than elemental mercury concentration. In particular, MSW, STS, and IWM combustions emitted higher concentration of reactive gaseous mercury. Concentrations of both gaseous mercury species varied greatly for all waste combustions excluding woody waste. Variation coefficients of measured data were nearly equal to or more than 1.0. Emission factors of gaseous elemental mercury, reactive gaseous mercury, and total mercury were calculated using continuous monitoring data. Total mercury emission factors are 0.30 g-Hg/Mg for MSW combustion, 0.21 g-Hg/Mg for STS combustion, 0.077 g-Hg/Mg for STS with waste plastics, 0.724 g-Hg/Mg for industrial waste mixtures, 0.028 g-Hg/Mg for waste plastic combustion, and 0.0026 g-Hg/Mg for woody waste combustion. All emission factors evaluated in this study were comparable or lower than other reported data. Emission inventory using old emission factors likely causes an overestimation.

Implications Although waste combustion is one of major anthropogenic sources of atmospheric mercury emission, estimated emission might have large uncertainty due to great heterogeneity of wastes. This study investigated speciated mercury emissions from the combustions of municipal solid wastes, sewage treatment sludge with/without waste plastics, industrial waste mixtures, waste plastics from construction demolition, and woody wastes using continuous monitoring devices. Reactive gaseous mercury was the major form in all combustion cases and its concentration in the gas had large fluctuation. All emission factors evaluated in this study were comparable or lower than other reported data. Emission inventory using old emission factors likely causes an overestimation.     

Polychlorinated biphenyl (118) activates osteoclasts and induces bone resorption in goldfish

To analyze the effect of polychlorinated biphenyl (PCB) 118 on fish bone metabolism, we examined osteoclastic and osteoblastic activities, as well as plasma calcium levels, in the scales of PCB (118)-injected goldfish. In addition, effect of PCB (118) on osteoclasts and osteoblasts was investigated in vitro. Immature goldfish, in which the endogenous effects of sex steroids are negligible, were used. PCB (118) was solubilized in dimethyl sulfoxide at a concentration of 10 ppm. At 1 and 2 days after PCB (118) injection (100 ng/g body weight), both osteoclastic and osteoblastic activities, and plasma calcium levels were measured. In an in vitro study, then, both osteoclastic and osteoblastic activities as well as each marker mRNA expression were examined. At 2 days, scale osteoclastic activity in PCB (118)-injected goldfish increased significantly, while osteoblastic activity did not change significantly. Corresponding to osteoclastic activity, plasma calcium levels increased significantly at 2 days after PCB (118) administration. Osteoclastic activation also occurred in the marker enzyme activities and mRNA expressions in vitro. Thus, we conclude that PCB (118) disrupts bone metabolism in goldfish both in vivo and in vitro experiments.     

Spatial trends of polybrominated diphenyl ethers in avian species: utilization of stored samples in the Environmental Specimen Bank of Ehime University (es-Bank)

The present study determined concentrations and patterns of polybrominated diphenyl ethers (PBDEs) and polychlorinated biphenyls (PCBs) in specimens of open sea, and Japanese coastal and inland avian species, which have been stored in the Environmental Specimen Bank of Ehime University (es-Bank), to examine the spatial trends. PBDEs and PCBs were detected in all the muscle samples analyzed, suggesting that PBDE pollution has spread even to the remote open sea areas, as in the case of PCBs. Japanese coastal and inland birds accumulated higher concentrations of PBDEs than open sea birds. In addition, higher PBDE/PCB concentration ratios were observed in Japanese coastal and inland birds than in open sea birds, indicating the input of PBDEs into the Japanese terrestrial environment. Compositions of PBDEs varied among avian species with a predominance of BDE47 or BDE153. This could be due to differences in their habitat, food habit and/or biotransformation capacity of PBDEs.     

Mass balance and long-term fate of PCDD/Fs in a lagoon sediment and paddy soil, Niigata, Japan

Polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) in a sediment core and in samples of surface sediment and paddy soil collected from the Toyano lagoon and Kameda basin in Niigata, Japan, were analyzed to elucidate the temporal trends of their concentrations in the lagoon sediment and the relationship between the sediment and the paddy soil. The mass balance of these pollutants was also estimated to determine their long-term fate in surface waters. An analysis by chemical mass balance identified the agrochemicals pentachlorophenol and 2,4,6-trichlorophenyl 4-nitrophenyl ether as the major sources of PCDD/Fs. On the basis of the findings regarding the mass balance in the Kameda basin over the last 40 years, we estimate that more than half the input of PCDD/Fs to the Kameda basin has disappeared. We suggest that the PCDD/Fs that flowed out from the paddy fields have been transferred to the lower basin.     

Butyltin residues in blue mussels (Mytilus edulis) and arkshells (Scapharca broughtonii) collected from Korean coastal waters

Butyltin compounds (BTs) including tributyltin (TBT) and its degradation products, di- (DBT) and mono-butyltin (MBT), were determined in bivalves such as blue mussels (Mytilus edulis) and arkshells (Scapharca broughtonii) collected from Korean coastal waters. BTs were detected in all the blue mussels and arkshells analyzed. The concentrations of total butyltin (sigmaBTs: MBT + DBT + TBT) in blue mussels and arkshells ranged from 49 to 2500 ng/g and 29 to 87 ng/g wet weight, respectively. Higher concentrations of BTs were found in blue mussels collected from Okpo and Kohyonsong Bays and Jangsengpo Harbor where large shipyards and harbors are located with dry-dock facilities. This suggested that maritime activities nearby the harbors play a major role as the source of BTs. Concentrations of TBT in mussels collected from Korea were one of the highest values reported, suggesting ongoing TBT contamination in Korea. Among BTs, TBT was the predominant compound both in blue mussels and arkshells collected from almost all the sampling locations, indicating the fresh input of TBT in Korean coastal waters. Smaller mussels tended to accumulate BTs at higher concentrations than larger ones, which may be due to higher filtration rate of small mussels and/or contact with surface microlayer in intertidal zones.