Efficient water desalination using photo-responsive ZnO polyamide thin film nanocomposite membrane

Environmental Chemistry Letters - Membrane separation technology has become one of the most frequently used techniques to secure adequate water resources for human consumption and other...     

Effects of physicochemical factors on PAH degradation by Planomicrobium alkanoclasticum

Polycyclic aromatic hydrocarbons (PAHs) are environmental pollutants that are mutagenic, carcinogenic, and toxic to living organisms. Here, the ability and effectiveness of selected bacteria isolated from an oil‐contaminated area in biodegrading PAHs were evaluated, and the optimal conditions conducive to bacterial PAH biodegradation were determined. Of six bacterial isolates identified based on their 16S rRNA sequences, Planomicrobium alkanoclasticum could subsist on and consume nearly all hydrocarbons according to the 2,6‐dichlorophenolindophenol assay. The efficacy of this isolate at PAH biodegradation was then empirically confirmed. After 30 days of incubation, P. alkanoclasticum degraded 90.8% of the 16 PAH compounds analyzed and fully degraded eight of them. The optimum P. alkanoclasticum growth conditions were 35°C, pH 7.5, and NaNO₃ as the nitrogen source. Under these biostimulant conditions, P. alkanoclasticum degraded 91.4% of the total PAH concentration and completely decomposed seven PAHs after 15 days incubation. Hence, P. alkanoclasticum is an apt candidate for the biodegradation of PAHs and the bioremediation of sites contaminated by them.     

Development of shopping centres in Jeddah

Recently developed shopping centres have become one of the main features of shopping activities in Jeddah. In fact the city of Jeddah experienced a surprising increase in the development of shopping centres during the last decade. Developers entered the land development process with the intention of realising profits from a long‐term investment, but a considerable number of shopping centres were developed on the basis of insufficient or no feasibility studies thereby underestimating or neglecting expected rate of return and occupancy. Spatially, shopping centres present distinctive spatial and rental value patterns. This article is concerned with explaining the supply side of shopping centres by examining the development process through which they were built. The analytical framework is based on discussing the interaction of three sets of variables: contextual factors, including land policy and market mechanisms; site characteristics, and the developer's characteristics.     

我国南方某省1988～1992年工伤调查分析

通过对南方某省１９８８～１９９２年工伤发生情况的调查，五年间工伤事故数、工伤死亡率及重伤率有逐年增加的趋势，煤炭、交通、建筑三个行业的工伤死亡人数约占工伤死亡总数的５０％；县以下乡镇企业中的工伤事故数、死亡率及重伤率均居首位。工伤事故中造成死亡的原因主要集中在物体打击、触电、高空坠落；引起重伤的原因集中在机械伤害、物体打击、车辆伤害和高空坠落。因此在劳动安全卫生管理工作上，要采取一些强有力的干预措施，特别要加强对乡镇工业企业及那些易发生工伤事故企业的管理。     

Green examination: integration of technology for sustainability

The recent development of infrastructure all around the world has resulted in an increasing trend of online examination in universities. The paper is an approach in theory and practical aimed at analyzing the feasibility of sustainable examination in four universities and its environmental impact reducing the paper use terming it as green examination. The paper studied the integration of sustainability through the use of computers and technology in the examination of the universities viz. King Khalid University (KKU), Saudi Arabia, Integral University (IU), India, Aligarh Muslim University (AMU), India, and The Hague University (HU), The Netherlands. The study has analyzed the trend of paper requirement, paper utilized and paper wasted in all the four universities. The environmental impact resulting from reduced paper use has been also analyzed. The feasibility of e-examination, its implementation and the implications has been undertaken in the study. The study concludes that the e-examination can almost make the examinations paperless and feasible in the four universities.     

Distribution and baseline values of trace elements in the sediment of Var River catchment,southeast France

This study reports on the determination of trace element (TE)—Li, As, Co, Cs, Cu, Pb, U, and Zn—and major element (ME)—Si, Al, Fe, Mg, Ca, Mn, Na, and K—concentrations in 18 riverbed sediments and a sediment core from the Var River catchment using inductively coupled plasma mass spectrometry (ICP-MS). The results were compared with those of a reference sediment core, and the contribution of clay and organic carbon contents in the distribution of TE and ME in the sediment samples was investigated. The mean concentrations of the ME were comparable in both core and riverbed samples and were within the natural averages. In the case of TE, the concentrations were lower in riverbed sediment samples than those found in the sediment core. High mean concentration of As was observed (7.6 μg g^?1) in both core and riverbed sediments, relatively higher than the worldwide reported values. The obtained data indicated that the natural high level of arsenic might be originated from the parent rocks, especially metamorphic rocks surrounding granites and from Permian sediments. Statistical approach, viz., Pearson correlation matrix, was applied to better understand the correlation among TE in both riverbed and sediment core samples. No significant metallic contamination was detected in the low Var valley despite of the localization of several industrial facilities. Therefore, results confirm that the concentrations of the TE obtained in the riverbed sediments could be considered as a baseline guide for future pollution monitoring program.     

The hydrogeology of a tailings impoundment formed by central discharge of thickened tailings: implications for tailings management

The Kidd Creek Cu–Zn sulfide mine is located near Timmins, Ontario. Mill tailings are thickened and deposited as a slurry in a circular impoundment with an area of approximately 1200 ha. Deposition of tailings as a thickened slurry from a central discharge ramp results in a conical-shaped tailings deposit with low perimeter dykes, a uniform grain-size distribution, uniform and low hydraulic conductivity, and a tension-saturated zone above the water table up to 5 to 6 m thick. These characteristics provide benefits over conventionally disposed tailings with respect to tailings management. The thick tension-saturated zone within the tailings limits the thickness of unsaturated tailings that are susceptible to rapid sulfide oxidation. The conical shape of the deposit results in the formation of a recharge area near the centre of the impoundment and discharge in the peripheral areas. In contrast, the elevated nature of many conventional, unthickened tailings impoundments results in recharge over most of the surface of the impoundment, with discharge occurring outside the impoundment through large containment dykes. Three-dimensional pore water flow modelling suggests that approximately 90% of the total discharge from the thickened tailings occurs within the tailings impoundment. When discharge is confined within the impoundment, there is improved control over low-quality effluent, and an opportunity to design passive control measures to reduce treatment costs and minimize environmental impacts.     

Determination of spatially-resolved porosity, tracer distributions and diffusion coefficients in porous media using MRI measurements and numerical simulations

This work is focused on measuring the concentration distribution of a conservative tracer in a homogeneous synthetic porous material and in heterogeneous natural sandstone using MRI techniques, and on the use of spatially resolved porosity data to define spatially variable diffusion coefficients in heterogeneous media. The measurements are made by employing SPRITE, a fast MRI method that yields quantitative, spatially-resolved tracer concentrations in porous media. Diffusion experiments involving the migration of H(2)O into D(2)O-saturated porous media are conducted. One-dimensional spatial distributions of H(2)O-tracer concentrations acquired from experiments with the homogeneous synthetic calcium silicate are fitted with the one-dimensional analytical solution of Fick's second law to confirm that the experimental method provides results that are consistent with expectations for Fickian diffusion in porous media. The MRI-measured concentration profiles match well with the solution for Fick's second law and provide a pore-water diffusion coefficient of 1.75×10(-9)m(2)s(-1). The experimental approach was then extended to evaluate diffusion in a heterogeneous natural sandstone in three dimensions. The relatively high hydraulic conductivity of the sandstone, and the contrast in fluid density between the H(2)O tracer and the D(2)O pore fluid, lead to solute transport by a combination of diffusion and density-driven advection. The MRI measurements of spatially distributed tracer concentration, combined with numerical simulations allow for the identification of the respective influences of advection and diffusion. The experimental data are interpreted with the aid of MIN3P-D - a multicomponent reactive transport code that includes the coupled processes of diffusion and density-driven advection. The model defines local diffusion coefficients as a function of spatially resolved porosity measurements. The D(e) values calculated for the heterogeneous sandstone and used to simulate diffusive and advective transport range from 5.4×10(-12) to 1.0×10(-10)m(2)s(-1). These methods have broad applicability to studies of contaminant migration in geological materials.     

Manganese and trace-metal mobility under reducing conditions following in situ oxidation of TCE by KMnO4: a laboratory column experiment

The stability of Mn oxides, and the potential for mobilization of associated trace metals, were assessed by simulating the onset of microbially-mediated reducing conditions in a continuous-flow column experiment. The column had previously been used for an in situ chemical oxidation (ISCO) experiment in which trichloroethylene was reacted with permanganate in the presence of aqueous trace metals, which produced Mn oxyhydroxides (MnO(x)) that sequestered the trace metals and coated the column sand. The column influent solution represented the incursion of ambient groundwater containing dissolved organic carbon (DOC) into an ISCO treatment zone. The influx of DOC-containing groundwater initiated a series of cation-exchange, surface-complexation and reductive-dissolution reactions that controlled the release of aqueous metals from the system. Peak concentrations in the effluent occurred in the order Na, Mo, Cr, Zn, K, Mn, Fe, Pb, Mg, Ni, Cu and Ca. Manganese release from the column was controlled by a combination of cation exchange, reductive dissolution and precipitation of rhodochrosite. The trend in Fe concentrations was similar to that of Mn, and also resulted from a combination of reductive dissolution and cation exchange. Cation exchange and/or surface-complexation were the primary mechanisms controlling Cu, Ni, Mo and Pb release to solution, while Zn and Cr concentrations did not display coherent trends. Although metal release from the treatment zone was evident in the data, concentrations of trace metals remained below 0.05 mg L(-1) with the exception of Mo which reached concentrations on the order of 1 mg L(-1). The establishment of anaerobic conditions in ISCO-treated aquifers may result in a prolonged flux of aqueous Mn(II), but with the exception of MoO(4)(2-), it is unlikely that trace metals sequestered with MnO(x) during ISCO will be released to the groundwater in elevated concentrations.