Changes in water quality in agricultural catchments after deployment of wastewater treatment plant

Insufficient wastewater remediation in small communities and nonpoint source pollution are the key factors in determining the water quality of small streams in an agricultural landscape. Despite the current extensive construction of municipal wastewater treatment facilities in small communities, the level of organic substances and nutrients in the recipient catchments has not decreased in many areas. This paper analyzes the changes in the water quality of the small streams after the deployment of wastewater treatment plants that were designed to address sources of pollution from small municipalities. The analysis is based on the results from a water quality monitoring network in the small watersheds in the Czech Republic. Five rural catchments with one dominant municipal pollution source, where a wastewater treatment plant was deployed during the monitoring period, were selected according to a predefined set of criteria, from a series of 317 profiles. Basic water quality indicators were selected for the assessment: O₂, BOD-5, COD, TOC, conductivity, NH₄-N, NO₂-N, NO₃-N, PT, and PO₄-P. Results of the analysis showed that the simple deployment of the water treatment facilities at these streams often did not lead to a reduction of contamination in the streams. The expected post-deployment changes, namely, a significant and permanent reduction of stream contamination, occurred only in one catchment, whereas in the remainder of the catchments, only marginal changes or even increased concentrations of the contaminants were detected. As the critical factors that determined the efficiency of wastewater treatment were studied, the need for the consideration of the local conditions during the design of the facility, particularly regarding the size of the catchments, initial level of contamination, proper system of operation, and process optimization of the treatment facility, emerged as the important factor.     

Contaminated area instability along Ångermanälven River,northern Sweden

Industrially utilized river basins are frequently exposed to contaminants originating from polluting activities. However, the physical instability and probability of mass movement mobilization of contaminated soil into rivers have only received little attention. In this study, we present a GIS-based method to produce a regional overview of where and how contaminated areas are potentially exposed to slope instability. A landslide susceptibility-index was used to study the degree and distribution of overlap between contaminated sites and unstable ground. A contaminated area instability hazard classification was produced integrating slope instability and contamination risk classification. Our results indicate that mass movement can be tied mainly to a slope gradient ≥16°, a proximity to the river that is <500 m, a distance of <500 m from roads, concave surface curvature, and sand- and silt soils. Forty-six (22%) of all considered contaminated sites are located within areas with a non-negligible slope instability, of which a majority, 30 sites (14%) are situated on ground with a low or moderate instability. Three sites with a class 2 contamination risk (the 2nd highest class) are located on ground with a very high slope instability.     

Simplified determination of lipophilic metabolites of nonylphenol ethoxylates: method development and application in aqueous samples from Buenos Aires, Argentina

In the present work we have developed an analytical methodology for the determination of nonylphenol (NP) and nonylphenol mono- and di-ethoxylates (NP1EO and NP2EO) in water samples. The applicability of this methodology was proved by means of the analysis of environmentally relevant aqueous samples from Buenos Aires. This constitutes a starting point for a rigorous assessment of the incidence of NPnEO surfactants in Argentina, as only very few, qualitative or semi-quantitative data on the occurrence of these compounds in local systems were available up to this time. Enrichment of the analytes was carried out by solid-phase extraction on a C-18 sorbent, followed by elution with ethyl acetate. Normal-phase high performance liquid chromatography on an amino-silica column and fluorescence detection at excitation-emission wavelengths of 230-300 nm were employed for separation and quantification of the analytes. Confirmation of peak assignment in selected real samples was performed by off-line coupling HPLC with GC-MS analysis. A non-polar GC capillary column was used, and a characteristic peak pattern was obtained for the alkyl chain isomers of each ethoxylated homologue and NP. GC-MS analyses yielded in all cases purity levels higher than 80% for the HPLC collected fractions. The elevated concentrations found for the estrogenic metabolites of NPnEO are in accordance with an unrestricted use of this class of non-ionic surfactants in the country.     

The comparison of heavy metal accumulation ratios of some fish species in Enne Dame Lake (Kütahya/Turkey)

The metal accumulation levels for muscle, skin, gill, liver and intestine tissues of some Cyprinidae species (Carassius carassius, Condrostoma nasus, Leuciscus cephalus and Alburnus alburnus) in Enne Dame Lake (Kütahya/Turkey), which is mostly fed by hot spring waters, were investigated. Analyses were performed for copper (Cu), zinc (Zn), manganese (Mn), iron (Fe), cobalt (Co), magnesium (Mg), nickel (Ni), chrome (Cr) and boron (B) using inductively coupled plasma-optic emission spectroscopy (ICP-OES), and cadmium (Cd) using atomic absorption spectrophotometer (AAS) utilizing microwave digestion techniques. The concentrations of the heavy metals found in the fish varied in the follow ing ranges: Cu: < DL-7.04, Zn: 6.96-357.25, Mn: < DL-20.70, Ni: < DL-6.21, Fe: 9.62-2500.33, Cr: < DL-1.74, Co: < DL-0.54, Cd: 0.01-0.27 and Mg: 197.44-904.90 mg/kg wet weight. While B had the second highest concentration in the water of the lake, it was not encountered in any tissue of the investigated species. In all tissues and the species, While the bioaccumulation factors (BAFs) of Mn, Zn, Fe and Cu were remarkably high, the BAFs of Mg, Cr, Co, and B were also fairly low or none. Although the heavy metal accumulation levels for the muscle were generally lower than other tissues, there were some exceptions. Cd level in the muscle of C. carassius was higher than the permissible limit stated by Turkish legislation, FAO and WHO. The mean metal amounts for all the investigated tissues and species are statistically compared and discussed in this study.     

Microbial contamination of dental unit waterlines and effect on quality of indoor air

The microbiological quality in dental unit waterlines (DUWLs) is considered to be important because patients and dental staff with suppressed immune systems are regularly exposed to water and aerosols generated from dental units (DUs). Opportunistic pathogens like Pseudomonas, Legionella, Candida, and Aspergillus can be present in DUWLs, while during consultations, bioaerosols can be dispersed in the air, thus resulting in effects on microbiological quality of indoor air. This present study represents microbiological air and water quality in dental offices (DOs) and also concerns the relationship between the quality of DO air and dental unit water. This study aimed to assess both the microbial quality of dental unit water and the indoor air in 20 DOs and to survey the effect on the quality of the indoor air with the existing microorganisms in dental unit water. Fourteen out of 20 (70 %) DUWLs were found to be contaminated with a high number of aerobic mesophilic heterotrophic bacteria. In terms of bacterial air contamination levels, in 90 % of DOs, a medium level (<500 colony-forming units (CFU)/m³) of contamination was determined, while in terms of microfungal air contamination, in all DOs, a low level (<100 CFU/m³) of contamination was determined. Potential infection or allergen agents, such as Pseudomonas, Micrococcus, Staphylococcus, Alternaria, Cladosporium, Penicillium, Aspergillus, and Paecilomyces were isolated from water and air samples. This study’s determination of contamination sources and evaluation of microbial load in DOs could contribute to the development of quality control methods in the future.     

Using process-based models to filter out natural variability in observed concentrations of nitrogen and phosphorus in river water

Advances in process-based modelling of loads of nitrogen and phosphorus carried by rivers have created new possibilities to interpret time series of water quality data. We examined how model runs with constant anthropogenic forcing can be used to estimate and filter out weather-driven variation in observational data and, thereby, draw attention to other features of such data. An assessment of measured and modelled nutrient concentrations at the outlets of 45 Swedish rivers provided promising results for total nitrogen. In particular, joint analyses of observational data and outputs from the catchment model S-HYPE strengthened the evidence that downward trends in nitrogen were due to mitigation measures in agriculture. Evaluation of modelled and observed total phosphorus concentrations revealed considerable bias in the collection or chemical analysis of water samples and also identified weaknesses in the model outputs. Together, our results highlight the need for more efficient two-way communication between environmental modelling and monitoring.     

Water chemistry in 179 randomly selected Swedish headwater streams related to forest production,clear-felling and climate

From a policy perspective, it is important to understand forestry effects on surface waters from a landscape perspective. The EU Water Framework Directive demands remedial actions if not achieving good ecological status. In Sweden, 44 % of the surface water bodies have moderate ecological status or worse. Many of these drain catchments with a mosaic of managed forests. It is important for the forestry sector and water authorities to be able to identify where, in the forested landscape, special precautions are necessary. The aim of this study was to quantify the relations between forestry parameters and headwater stream concentrations of nutrients, organic matter and acid-base chemistry. The results are put into the context of regional climate, sulphur and nitrogen deposition, as well as marine influences. Water chemistry was measured in 179 randomly selected headwater streams from two regions in southwest and central Sweden, corresponding to 10 % of the Swedish land area. Forest status was determined from satellite images and Swedish National Forest Inventory data using the probabilistic classifier method, which was used to model stream water chemistry with Bayesian model averaging. The results indicate that concentrations of e.g. nitrogen, phosphorus and organic matter are related to factors associated with forest production but that it is not forestry per se that causes the excess losses. Instead, factors simultaneously affecting forest production and stream water chemistry, such as climate, extensive soil pools and nitrogen deposition, are the most likely candidates The relationships with clear-felled and wetland areas are likely to be direct effects.     

Models for waste life cycle assessment: Review of technical assumptions

A number of waste life cycle assessment (LCA) models have been gradually developed since the early 1990s, in a number of countries, usually independently from each other. Large discrepancies in results have been observed among different waste LCA models, although it has also been shown that results from different LCA studies can be consistent. This paper is an attempt to identify, review and analyse methodologies and technical assumptions used in various parts of selected waste LCA models. Several criteria were identified, which could have significant impacts on the results, such as the functional unit, system boundaries, waste composition and energy modelling. The modelling assumptions of waste management processes, ranging from collection, transportation, intermediate facilities, recycling, thermal treatment, biological treatment, and landfilling, are obviously critical when comparing waste LCA models.This review infers that some of the differences in waste LCA models are inherent to the time they were developed. It is expected that models developed later, benefit from past modelling assumptions and knowledge and issues. Models developed in different countries furthermore rely on geographic specificities that have an impact on the results of waste LCA models. The review concludes that more effort should be employed to harmonise and validate non-geographic assumptions to strengthen waste LCA modelling.     

Erratum to: High optoelectronic and antimicrobial performances of green synthesized ZnO nanoparticles using Aesculus hippocastanum

Environmental Chemistry Letters - Nanosized materials are of increasing interest due to their optical and electrical properties. In particular, the semiconductor ZnO has a wide band gap of...     

Approaches to assess biocover performance on landfills

Methane emissions from active or closed landfills can be reduced by means of methane oxidation enhanced in properly designed landfill covers, known as “biocovers”. Biocovers usually consist of a coarse gas distribution layer to balance gas fluxes placed beneath an appropriate substrate layer. The application of such covers implies use of measurement methods and evaluation approaches, both during the planning stage and throughout the operation of biocovers in order to demonstrate their efficiency. Principally, various techniques, commonly used to monitor landfill surface emissions, can be applied to control biocovers. However, particularly when using engineered materials such as compost substrates, biocovers often feature several altered, specific properties when compared to conventional covers, e.g., respect to gas permeability, physical parameters including water retention capacity and texture, and methane oxidation activity. Therefore, existing measuring methods should be carefully evaluated or even modified prior to application on biocovers. This paper discusses possible strategies to be applied in monitoring biocover functionality. On the basis of experiences derived from investigations and large-scale field trials with compost biocovers in Austria, an assessment approach has been developed. A conceptual draft for monitoring biocover performance and recommendations for practical application are presented.