Biodegradation of petroleum hydrocarbon vapors: laboratory studies on rates and kinetics in unsaturated alluvial sand

Predictions of natural attenuation of volatile organic compounds (VOCs) in the unsaturated zone rely critically on information about microbial biodegradation kinetics. This study aims at determining kinetic rate laws for the aerobic biodegradation of a mixture of 12 volatile petroleum hydrocarbons and methyl tert-butyl ether (MTBE) in unsaturated alluvial sand. Laboratory column and batch experiments were performed at room temperature under aerobic conditions, and a reactive transport model for VOC vapors in soil gas coupled to Monod-type degradation kinetics was used for data interpretation. In the column experiment, an acclimatization of 23 days took place before steady-state diffusive vapor transport through the horizontal column was achieved. Monod kinetic parameters Ks and vmax could be derived from the concentration profiles of toluene, m-xylene, n-octane, and n-hexane, because substrate saturation was approached with these compounds under the experimental conditions. The removal of cyclic alkanes, isooctane, and 1,2,4-trimethylbenzene followed first-order kinetics over the whole concentration range applied. MTBE, n-pentane, and chlorofluorocarbons (CFCs) were not visibly degraded. Batch experiments suggested first-order disappearance rate laws for all VOCs except n-octane, which decreased following zero-order kinetics in live batch experiments. For many compounds including MTBE, disappearance rates in abiotic batch experiments were as high as in live batches indicating sorption. It was concluded that the column approach is preferable for determining biodegradation rate parameters to be used in risk assessment models.     

Mono- to tri-chlorinated dibenzodioxin (CDD) and dibenzofuran (CDF) congeners/homologues as indicators of CDD and CDF emissions from municipal waste and waste/coal combustion

Total homologue concentrations and select congener concentrations from amongst the mono- to tri-chlorinated dibenzodioxins (CDDs) and dibenzofurans (CDFs) are used to model both Total (mono- to octa-) CDD + CDF emissions and the toxicity equivalent (TEQ) of the 2,3,7,8-chlorine-substituted emissions. Analysis of emission data from two facilities indicates that use of total homologue concentrations shows limited, facility-specific correlations with Total CDDs/CDFs and TEQ. Concentrations of select mono- to tri-CDD/CDF congeners show promising correlation with CDD/CDF TEQ across facilities, suggesting that these compounds can act as TEQ indicators.     

Characterization of industrial aqueous discharges by the TLC/Ames’ assay

The $\text{in situ}$ detection of mutagens by the TLC/Ames’ assay has been applied to aqueous discharges from a textile plant. The samples were fractionated in acid/neutral and basic fractions which subsequently were subject to the TLC/Ames’ test. The results demonstrate the presence of a number of both direct and indirect mutagens in the waste water. The chemical properties of these compounds are discussed in light of their chromatographic behaviour. The applicability of this method for characterizing mutagens in complex mixtures is demonstrated.     

Sampling and analysis of polycyclic aromatic hydrocarbons (PAH) from two-stroke chain-saw engines

A sampling and analysis method for PAH from two-stroke engines is described. The method, which uses a standard glass fiber filter with a back-up section of Amberlite XAD-2 for sampling and GC or GC-MS for analysis, is suitable for both emission studies and occupational studies during logging. Filters and XAD-2 are desorbed with cyclohexane in an ultrasonic bath. After separation on a silica-gel micro column, the samples are submitted to analyses by capillary GC. The method is simple and covers both gaseous and particulate PAH. Naphthalene and alkyl substituted naphthalenes are also quantified.     

Impact of a flood disaster on sediment toxicity in a major river system--the Elbe flood 2002 as a case study

The ecotoxicological implications of a flooding disaster were investigated with the exceptional Elbe flood in August 2002 as an example. Sediment samples were taken shortly after the flood at 37 sites. For toxicity assessment the midge Chironomus riparius (Insecta) and the mudsnail Potamopyrgus antipodarum (Gastropoda) were exposed to the sediment samples for 28 days. For a subset of 19 sampling sites, the contamination level and the biological response of both species were also recorded before the flood in 2000. The direct comparison of biological responses at identical sites revealed significant differences for samples taken before and immediately after the flood. After flood sediments of the river Elbe caused both higher emergence rates in the midge and higher numbers of embryos in the mudsnail. Contrary to expectations the toxicity of the sediments decreased after the flood, probably because of a dilution of toxic substances along the river Elbe and a reduction in bioavailability of pollutants as a result of increasing TOC values after the flood.     

Bioaugmentation with a Bacillus sp. to reduce the phytoavailable Cd of an agricultural soil: comparison of free and immobilized microbial inocula

In order to reduce the cadmium potentially available for plants, soil bioaugmentation was performed by using a Bacillus sp. In a pot experimentation, sterilized and non-sterilized soils were inoculated using free or immobilized cells entrapped in alginate beads. This test was carried out with different inoculum sizes (2 x 10(10) and 2 x 10(11)CFU kg(-1) dw of soil) and alginate bead compositions (10 and 15 g of both alginate and CaCl(2) l(-1)). Then, the soil pots were incubated at 20 degrees C and the soil humidity was kept at a level of 20%. After 3 weeks of a batch incubation, the potentially phytoavailable Cd was reduced up to a factor of 14. The bioaugmentation resulted in the soil colonization by Bacillus sp. thanks to an increase of the cell concentration up to 1.8 log units. However, in comparison to the cells being inoculated in a free mode, the immobilization of the cells did not significantly improve the survival of the cells in the soil. Although the resulting effect not being highly pronounced, the potentially phytoavailable Cd correlated with the cell concentration in a surprisingly positive way. What is more, the Bacillus concentrations in the soil were positively correlated with the inoculum, too.     

Simulated distributions of Baltic Sea-ice in warming climate and consequences for the winter habitat of the Baltic ringed seal

Sea-ice in the Baltic Sea in present and future climates is investigated. The Rossby Centre Regional Atmosphere-Ocean model was used to perform a set of 30-year-long time slice experiments. For each of the two driving global models HadAM3H and ECHAM4/OPYC3, one control run (1961-1990) and two scenario runs (2071-2100) based upon the SRES A2 and B2 emission scenarios were conducted. The future sea-ice volume in the Baltic Sea is reduced by 83% on average. The Bothnian Sea, large areas of the Gulf of Finland and Gulf of Riga, and the outer parts of the southwestern archipelago of Finland will become ice-free in the mean. The presented scenarios are used to study the impact of climate change on the Baltic ringed seal (Phoca hispida botnica). Climate change seems to be a major threat to all southern populations. The only fairly good winter sea-ice habitat is found to be confined to the Bay of Bothnia.     

Kinematic analysis of solute mass flows in rock fractures with spatially random parameters

Field data of physical properties in heterogeneous crystalline bedrock, like porosity and fracture aperture, is associated with uncertainty that can have a significant impact on the analysis of solute transport in rock fractures. Solutions to the central temporal moments of the residence time probability density function (PDF) are derived in a closed form for a solute Dirac pulse. The solutions are based on a model that takes into account advection along the fracture plane, diffusion into the rock matrix and sorption kinetics in the rock matrix. The most relevant rock properties including fracture aperture and several matrix properties as well as flow velocity are assumed to be spatially random along transport pathways. The mass transport is first solved in a general form along one-dimensional pathways, but the results can be extended to multi-dimensional flows simply by substituting the expected travel time for inert water parcels. Based on data obtained with rock samples taken at Asp? Hard Rock Laboratory in Sweden, the solutions indicate that the heterogeneity of the rock properties contributes to increasing significantly both the variance and the skewness of the residence time probability density function for a pulse travelling in a fracture. The Asp? data suggests that the bias introduced in the variance of the residence time PDF by neglecting the effect of heterogeneity of the rock properties on the radionuclide migration is very large for fractures thinner than a few tenths of a millimetre.     

Assessing village authenticity with satellite images: a method to identify intact cultural landscapes in Europe

The village with its characteristic zones of different land use from the center to the periphery is a basic unit of Europe's cultural landscapes. However, loss of the authentic pre-industrial village structure characterized by a fine-grained structure of arable land and wooded grasslands is a threat to both cultural heritage and biodiversity in many rural landscapes. Therefore, it is important that the extent and rate of change of such authentic villages in a landscape can be monitored. We studied to what extent loss of authenticity with increasing time after abandonment can be assessed by quantitative analysis and visual interpretation of satellite images. The study was carried out in the Bieszczady Mountains, SE Poland in 1999. Using Landsat Thematic Mapper data from 1998, both the grain size of landscape elements (size of fields) and land-cover composition (encroachment of shrub and forest) were quantitatively described 6 type villages representing different stages of deterioration of the authentic village structure. Historical maps were used to delineate the border of the villages and the former extension of forest and open land was measured. The present land use and the degree of abandonment expressed as grain size and forest encroachment were mapped using satellite data. Deterioration occurred along 2 transformation paths: abandonment and ultimately becoming forest, or intensified agriculture, respectively. To validate these results we classified 22 other villages in a 1000 km2 area by visual interpretation of the original satellite images into 1 of 4 types. We then collected historical data on human population changes over the past six decades. The classification of village authenticity was clearly related to the rate of human population decline. We address the importance of validating and applying this approach for rapid assessment of the authenticity of cultural landscapes in European regions being subject to ongoing as well as expected future change, related to expansion of the European Union. Finally, we argue that the village represents a scale at which integration of natural and social sciences is possible.     

Development of a simple selective SFE method for the determination of desorption behaviour of PCBs in two Swedish sediments

A simple selective supercritical fluid extraction (SFE) method was developed for the determination of desorption behaviour of PCBs in sediments. This method was applied to determine the distribution of individual PCB congeners among sites of differing bonding strengths in two Swedish sediments (Lake J?rnsj?n and Baltic bay Orserumsviken). Four different PCB fractions were distinguished in each sediment by applying consecutively harsher supercritical fluid extraction conditions on the same sample. Even though the two sediments had completely different textures, they showed very similar extraction behaviour. It was shown that, in both sediments, a major part of the PCBs (58% and 65%, respectively) were located at "fast sites", from which they were extractable already with the mildest extraction conditions (60 min, 40 degrees C and 120 bar). Only a small fraction of the PCBs were so tightly bound to the sediments (located at "slow sites"), that they could be extracted only under the harshest conditions (60 min, 150 degrees C and 400 bar). Information of this kind should be of great value for the determination of bioavailability of pollutants in sediments and soils, and it is the author's belief that this technique has the potential to develop into a powerful tool in environmental risk assessment.