Evaluation of the effect of a cover layer on radon exhalation from uranium mill tailings: transient radon flux analysis

An experimental study concerning the transport of 222Rn in uranium mill tailings (UMTs) and in the cover layer was launched in 1997 with the participation of the French uranium mining company (COGEMA). Evaluation of the cover layer's effectiveness in reducing 222Rn flux emanating from UMTs was one of its objectives. In the first phase, the 222Rn flux densities were measured regularly on a UMT layer. In the second phase, the UMT was covered with a one-meter layer of compacted material consisting of crushed waste rock derived from mining activities. Radon-222 flux was then measured at the surface of this cover layer. Observations were compared with radon flux calculated using TRACI, a model for vertical water and gas flow and radon transport. The results show that the calculations bear a fair resemblance to the observations in both cases. They also show that the effectiveness of the cover layer calculated with TRACI, using the thickness and textural properties of the cover material, is very close to the measured effectiveness.     

Nesting habits shape feeding preferences and predatory behavior in an ant genus

We tested if nesting habits influence ant feeding preferences and predatory behavior in the monophyletic genus Pseudomyrmex (Pseudomyrmecinae) which comprises terrestrial and arboreal species, and, among the latter, plant-ants which are obligate inhabitants of myrmecophytes (i.e., plants sheltering so-called plant-ants in hollow structures). A cafeteria experiment revealed that the diet of ground-nesting Pseudomyrmex consists mostly of prey and that of arboreal species consists mostly of sugary substances, whereas the plant-ants discarded all the food we provided. Workers forage solitarily, detecting prey from a distance thanks to their hypertrophied eyes. Approach is followed by antennal contact, seizure, and the manipulation of the prey to sting it under its thorax (next to the ventral nerve cord). Arboreal species were not more efficient at capturing prey than were ground-nesting species. A large worker size favors prey capture. Workers from ground- and arboreal-nesting species show several uncommon behavioral traits, each known in different ant genera from different subfamilies: leaping abilities, the use of surface tension strengths to transport liquids, short-range recruitment followed by conflicts between nestmates, the consumption of the prey’s hemolymph, and the retrieval of entire prey or pieces of prey after having cut it up. Yet, we never noted group ambushing. We also confirmed that Pseudomyrmex plant-ants live in a kind of food autarky as they feed only on rewards produced by their host myrmecophyte, or on honeydew produced by the hemipterans they attend and possibly on the fungi they cultivate.     

Displacement and sweep efficiencies in a DNAPL recovery test using micellar and polymer solutions injected in a five-spot pattern

Soil washing with micellar solutions is a promising alternative for the remediation of DNAPL source zones. As with any flushing technology, the success of soil washing with micellar solutions depends in a very large part on the ability of the solution to contact the contaminant (sweep efficiency) and then on the efficiency of contaminant removal once this contact is made (displacement efficiency). We report here on a field test where a micellar solution was used to recover a DNAPL in an open five-spot pattern in which polymer solutions were also injected before and after the washing solution to improve sweep efficiency. The washing solution formulation was optimised in the laboratory prior to the test to obtain good dissolution capacity. For a high-concentration and low-volume soil flushing remediation test such as the one performed (0.8 pore volumes of actual washing solution injected), slug sizing of the washing solution is critical. It was evaluated by an analytical solution. In a five-spot pattern, the displacement efficiency of the washing solution was observed to vary in the porous medium as a function of the radial distance from the injection well because: (1) the volume of the washing solution flowing through a section of the test cell changes (maximum close to the injection well and minimal at the pumping wells); (2) the in situ velocity changes (maximum at the wells and minimum between the wells) and; (3) the contact time of the washing solution with the NAPL changes as a function of the distance from the injection well. The relative importance of the recovery mechanisms, mobilisation and dissolution, was also observed to vary in the test cell. The reduced velocity increased the contact time of the washing solution with the DNAPL enhancing its dissolution, but the decrease of the capillary number caused less mobilisation. The washing process is much more extensive around the injection well. The use of an injection-pumping pattern allowing a complete sweep of the remediated area is essential. Following a comprehensive characterisation, modeling is an efficient tool to design the injection-pumping scheme and to optimise injection and pumping rates providing the best areal sweep. The vertical sweep can be controlled by using a polymer solution (Xanthan gum). The polymer solution also has a positive effect on front stability between the solutions injected. The injection rate of the polymer solution that follows the washing solution must be kept minimal initially to prevent dilution of the washing solution by fingering.     

Tobacco Plants Detect a Decrease of Environmental Genotoxicity in Toulouse (France)

Tobacco plants, heterozygous for two independent loci involved in the chlorophyll parenchyma differentiation, allow the genotoxic effects of the atmosphere of the industrial estate South of Toulouse to be estimated. Somatic spots of green cellular colonies on yellow-green background, were counted to calculate the cellular rates of reversion. Two experiments were carried out in 1981, and in 1997. A general decrease of genotoxic effects was observed. These observations were interpreted as being due to a general decrease of the air pollution evaluated by the development of the concentrations of three toxic gases before and after the implementation of cleanup devices. The results obtained demonstrate the efficiency of this bio-indicator, which is easy to use and capable of integrating, in situ, genotoxic variations throughout the duration of plants' growth.     

A hydrological modeling framework for defining achievable performance standards for pesticides

This paper proposes a hydrological modeling framework to define achievable performance standards (APSs) for pesticides that could be attained after implementation of recommended management actions, agricultural practices, and available technologies (i.e., beneficial management practices [BMPs]). An integrated hydrological modeling system, Gestion Intégrée des Bassins versants à l'aide d'un Système Informatisé, was used to quantify APSs for six Canadian watersheds for eight pesticides: atrazine, carbofuran, dicamba, glyphosate, MCPB, MCPA, metolachlor, and 2,4-D. Outputs from simulation runs to predict pesticide concentration under current conditions and in response to implementation of two types of beneficial management practices (reduced pesticide application rate and 1- to 10-m-wide edge-of-field and/or riparian buffer strips, implemented singly or in combination) showed that APS values for scenarios with BMPs were less than those for current conditions. Moreover, APS values at the outlet of watersheds were usually less than ecological thresholds of good condition, when available. Upstream river reaches were at greater risk of having concentrations above a given ecological thresholds because of limited stream flows and overland loads of pesticides. Our integrated approach of "hydrological modeling-APS estimation-ecotoxicological significance" provides the most effective interpretation possible, for management and education purposes, of the potential biological impact of predicted pesticide concentrations in rivers.     

Calibration and validation of an integrated nitrate transport model within a well capture zone

Groundwater contamination by nitrate was investigated in an agricultural area in southern Quebec, Canada, where a municipal well is the local source of drinking water. A network of 38 piezometers was installed within the capture zone of the municipal well to monitor water table levels and nitrate concentrations in the aquifer. Nitrate concentrations were also measured in the municipal well. A Water flow and Nitrate transport Global Model (WNGM) was developed to simulate the impact of agricultural activities on nitrate concentrations in both the aquifer and municipal well. The WNGM first uses the Agriflux model to simulate vertical water and nitrate fluxes below the root zone for each of the seventy agricultural fields located within the capture zone of the municipal well. The WNGM then uses the HydroGeoSphere model to simulate three-dimensional variably-saturated groundwater flow and nitrate transport in the aquifer using water and nitrate fluxes computed with the Agriflux model as the top boundary conditions. The WNGM model was calibrated by reproducing water levels measured from 2005 to 2007 in the network of piezometers and nitrate concentrations measured in the municipal well from 1997 to 2007. The nitrate concentrations measured in the network of piezometers, however, showed greater variability than in the municipal well and could not be reproduced by the calibrated model. After calibration, the model was validated by successfully reproducing the decrease of nitrate concentrations observed in the municipal well in 2006 and 2007. Although it cannot predict nitrate concentrations in individual piezometers, the calibrated and validated WNGM can be used to assess the impact of changes in agricultural practices on global nitrate concentrations in the aquifer and in the municipal well.     

Effects of long exposure to low temperatures on nitrifying biofilm and biomass in wastewater treatment

Attached growth biological treatment systems are a promising solution to ammonia removal in cold-temperature climates. Environmental scanning electron microscopy (ESEM) and confocal laser scanning microscopy in combination with fluorescent in situ hybridization (FISH) was used to investigate the effects of 4 months of exposure to 4 degrees C on nitrifying biofilm and biomass. These molecular and microscopic methods were modified to minimize loss of mass and distortion of in situ perspectives. Environmental scanning electron microscopy revealed that nitrifying biofilm did not exhibit significant changes in volume with exposure to 4 degrees C. Confocal laser scanning microscopy in combination with FISH showed that the number of ammonia-oxidizing bacteria (AOB) cells present in the biofilm was statistically consistent during exposure to 4 degrees C. The RNA content of AOB cells remained sufficient for FISH enumeration. The number of nitrite-oxidizing bacteria cells remained steady during exposure to 4 degrees C; however, the RNA content of the cells appeared to decrease with exposure to 4 degrees C, thereby preventing their enumeration using FISH.     

Degradation in an Inert Solid Medium of Poly(Lactic Acid) Polymeric Material by Kibdelosporangium aridum

The aim of this work was to estimate the biodegradation of a poly(lactic acid) polymeric material by the actinomycetes Kibdelosporangium aridum using a vermiculite based inert solid medium which could simulate compost medium and enable us to achieve complete carbon balances. The mineralisation rate at the end of the test was compared to those obtained for two basal media. It was shown that cumulative mineralisation after 45 days of degradation was greater (70%) in vermiculite with a basal medium containing gelatin than in vermiculite with a basal medium containing glucose (20%).     

Exposure assessment of French women and their newborns to tetrabromobisphenol-A: occurrence measurements in maternal adipose tissue, serum, breast milk and cord serum

A French monitoring study was initiated to evaluate the exposure of fetus and newborn to brominated flame retardants (BFR). A previously developed multi-residue analytical method was used for measuring the main classes of BFR (tetrabromobisphenol-A, and tri- to decabomodiphenyl ethers) in various human biological matrices. Analyzed samples (maternal and cord serum, adipose tissue and breast milk) were collected from 93 volunteer women during caesarean deliveries. TBBPA was detected in 44% of the analyzed breast milk samples, at levels varying from 0.06 to 37.34 ng g(-1) lipid weight, but was not detected in adipose tissue. This compound was also detected in 30% of the analyzed serum samples, with similar average values in maternal and cord serum (154 pg g(-1) fresh weight versus 199 pg g(-1) fresh weight, respectively). The interpretation of the collected data permitted the demonstration of (1) a significant exposure to TBBPA both for mothers and fetuses and (2) a possible risk of overexposure of newborns through breastfeeding.