The Impact of a Building Implosion on Airborne Particulate Matter in an Urban Community

Abstract

In response to community concerns, the air quality impact of imploding a 22-story building in east Baltimore, MD, was studied. Time- and space-resolved concentrations of indoor and outdoor particulate matter (PM) (nominally 0.5–10 µm) were measured using a portable nephelometer at seven and four locations, respectively. PM₁₀ levels varied in time and space; there was no measurable effect observed upwind of the implosion. The downwind peak PM₁₀ levels varied with distance (54,000–589 µg/m³) exceeding pre-implosion levels for sites 100 and 1130 m 3000- and 20-fold, respectively. Estimated outdoor 24-hr integrated mass concentrations varied from 15 to 72 µg/m³. The implosion did not result in the U.S. Environmental Protection Agency (EPA) National Ambient Air Quality Standard (NAAQS) for PM₁₀ being exceeded. X-ray fluorescence analysis indicated that the elemental composition was dominated by crustal elements: calcium (57%), silicon (23%), aluminum (7.6%), and iron (6.1%). Lead was above background but at a low level (0.17 µg/m³). Peak PM₁₀ concentrations were short-lived; most sites returned to background within 15 min. No increase in indoor PM₁₀ was observed even at the most proximate 250 m location. These results demonstrate that a building implosion can have a severe but short-lived impact on community air quality. Effective protection is offered by being indoors or upwind.     

PM10 Dispersion Modeling for Treasure Valley,Idaho

ABSTRACT

The recorded exceedances of the 24-hr PM₁₀ National Ambient Air Quality Standard (NAAQS) in Treasure Valley, Idaho, have been associated with prolonged stagnation periods during the winter. A comprehensive modeling study of PM₁₀ impact in Treasure Valley was performed to support the State Implementation Plan (SIP). The study included base-year and short-term episodic conditions. The ISCST3 (Industrial Source Complex Short Term 3) model, using the base-year meteorology and gridded emissions of mobile sources, point sources, and wood burning as input, generally agreed well with measurements in both temporal patterns and annual averages. The WYNDvalley model was evaluated using monitoring data and was used to simulate the PM₁₀ impact for episodic exceedances during stagnant winter conditions. An emission inventory was prepared for a base year (1995) and then extrapolated to the years 2000, 2005, 2010, and 2015 in order to determine air quality planning requirements. According to the simulations using base-year emissions and meteorology, exceedances are not expected. However, exceedances at some stations could be expected using projected emissions and episodic meteorology. Results from emission control strategies we developed indicate that mobile-source emissions have the most significant impact; reduction of 25% would be needed to eliminate the simulated exceedances in all projected years.     

Mutualism as reciprocal exploitation: African plant-ants defend foliar but not reproductive structures

The foundation of many plant-ant mutualisms is ant protection of plants from herbivores in exchange for food and/or shelter. While the role of symbiotic ants in protecting plants from stem- and leaf-feeding herbivores has been intensively studied, the relationship between ant defense and measures of plant fitness has seldom been quantified. We studied ant aggression, damage by herbivores and seed predators, and fruit production among Acacia drepanolobium trees occupied by four different acacia-ant species in an East African savanna. Levels of ant aggression in response to experimental disturbance differed strongly among the four species. All four ant species recruited more strongly to new leaf growth on host plants following disturbance, while recruitment to developing fruits was on average an order of magnitude lower. Host plants occupied by more aggressive ant species suffered significantly less vegetative damage from leaf-feeding insects, stem-boring beetles, and vertebrate browsers than host plants occupied by less aggressive ant species. However, there were no differences among fruiting host plants occupied by different ant species in levels of seed predation by bruchid seed predators. Fruit production on host trees was significantly correlated with tree stem diameter but not with the identity of resident ants. Our results demonstrate that defense of host plants may differ substantially among ant species and between vegetative and reproductive structures and that fruit production is not necessarily correlated with high levels of aggression by resident ants.     

Observations of urban airborne particle number concentrations during rush-hour conditions: analysis of the number based size distributions and modal parameters

A summertime study of the number concentration and the size distribution of combustion derived nanometre sized particles (termed nanoparticles) from diesel and spark-ignition (SI) engine emissions were made under rush-hour and free-flow traffic conditions at an urban roadside location in Leeds, UK in July 2003. The measured total particle number concentrations (N(TOTAL)) were of the order 1.8 x 10(4) to 3.4 x 10(4) cm(-3), and tended to follow the diurnal traffic flow patterns. The N(TOTAL) was dominated by particles < or =100 nm in diameter which accounted for between 89-93% of the measured particle number. By use of a log-normal fitting procedure, the modal parameters of the number based particle size distribution of urban airborne particulates were derived from the roadside measurements. Four component modes were identified. Two nucleation modes were found, with a smaller, more minor, mode composed principally of sub-11 nm particles, believed to be derived from particles formed from the nucleation of gaseous species in the atmosphere. A second mode, much larger in terms of number, was composed of particles within the size range of 10-20 nm. This second mode was believed to be principally derived from the condensation of the unburned fuel and lube oil (the solvent organic fraction or SOF) as it cooled on leaving the engine exhaust. Third and fourth modes were noted within the size ranges of 28-65 nm and 100-160 nm, respectively. The third mode was believed to be representative of internally mixed Aitken mode particles composed of a soot/ash core with an adsorbed layer of readily volatilisable material. The fourth mode was believed to be composed of chemically aged, secondary particles. The larger nucleation and Aitken modes accounted for between 80-90% of the measured N(TOTAL), and the particles in these modes were believed to be derived from SI and diesel engine emissions. The overall size distribution, particularly in modes II-IV, was observed to be strongly related to the number of primary particle emissions, with larger count median diameters observed under conditions where low numbers of primary soot based particles were present.     

Willingness to accept mobility opportunities: Destination makes a difference

Previous research on employee willingness to accept mobility opportunities involving geographic relocation has generally not specified characteristics of potential destination communities. However, studies of employee adjustment following relocation suggest that community characteristics are critical to employee satisfaction. In order to better understand the factors that influence employees' acceptance of mobility opportunities, we investigated differences in both levels and antecedents of willingness to accept mobility opportunities involving relocation between similar communities and relocation between dissimilar communities. Results suggest that employees were particularly reluctant to accept moves between dissimilar communities, and that the role of career factors, community attachment, and location preferences as antecedents varied depending on the specific nature of the mobility opportunity. Implications for research and practice are discussed.     

Host preference,site fidelity,and homing behavior of the symbiotically luminous cardinalfish,Siphamia tubifer (Perciformes: Apogonidae)

The sea urchin cardinalfish, Siphamia tubifer (Perciformes: Apogonidae), is unusual among coral reef fishes for its use of bioluminescence, produced by symbiotic bacteria, while foraging at night. As a foundation for understanding the relationship between the symbiosis and the ecology of the fish, this study examined the diel behavior, host urchin preference, site fidelity, and homing of S. tubifer in June and July of 2012 and 2013 at reefs near Sesoko Island, Okinawa, Japan (26°38′N, 127°52′E). After foraging, S. tubifer aggregated in groups among the spines of the longspine sea urchin, Diadema setosum, and the banded sea urchin, Echinothrix calamaris. A preference for D. setosum was evident (P < 0.001), especially by larger individuals (>25 mm standard length, P < 0.01), and choice experiments demonstrated the ability of S. tubifer to recognize and orient to a host urchin and to conspecifics. Tagging studies revealed that S. tubifer exhibits daily fidelity to a host urchin; 43–50 and 26–37 % of tagged individuals were associated with the same urchin after 3 and 7 days. Tagged fish also returned to their site of origin after displacement; by day two, 23–43 and 27–33 % of tagged individuals returned from displacement distances of 1 and 2 km. These results suggest that S. tubifer uses various environmental cues for homing and site fidelity; similar behaviors and cues might be used by larvae for recruitment to settlement sites and for the acquisition of luminous symbiotic bacteria.     

Determination of the persistence of pharmaceuticals in biosolids using liquid-chromatography tandem mass spectrometry

Sludge generated in waste water treatment process can be a major sink for some pharmaceutical and personal care products (PPCPs). The land application of sewage sludge (in the form of biosolids in the United States) can therefore potentially introduce PPCPs into the environment. After treatment, biosolids are often subjected to a storage period before land application. However, little information is available with regard to the fate of PPCPs in biosolids during the storage. In this work, the persistence of seven pharmaceuticals and one antibacterial was evaluated using ultrasonic extraction and liquid-chromatography tandem mass spectrometry (LC-MS/MS). The impacts of aeration and sunlight exposure were investigated. During the experiment, no elimination was observed for carbamazepine, triclosan, and ciprofloxacin while elimination was found for tetracycline, doxycycline, clindamycin, erythromycin, and clarithromycin. Using an availability-adjusted kinetic model, the 50% dissipation time was 37 to >77d for tetracycline, 53 to >77d for doxycycline, 1.0-1.6d for clindamycin, 1.1-1.9d for clarithromycin, and 7.0-17d for erythromycin. Those compounds were found more persistent under anaerobic conditions than aerobic condition with a longer 50% dissipation time by a factor of 1.5-2. However, minor impact was observed from sunlight irradiation.     

A dynamic simulation based water resources education tool

Educational tools to assist the public in recognizing impacts of water policy in a realistic context are not generally available. This project developed systems with modeling-based educational decision support simulation tools to satisfy this need. The goal of this model is to teach undergraduate students and the general public about the implications of common water management alternatives so that they can better understand or become involved in water policy and make more knowledgeable personal or community decisions. The model is based on Powersim, a dynamic simulation software package capable of producing web-accessible, intuitive, graphic, user-friendly interfaces. Modules are included to represent residential, agricultural, industrial, and turf uses, as well as non-market values, water quality, reservoir, flow, and climate conditions. Supplementary materials emphasize important concepts and lead learners through the model, culminating in an open-ended water management project. The model is used in a University of Arizona undergraduate class and within the Arizona Master Watershed Stewards Program. Evaluation results demonstrated improved understanding of concepts and system interactions, fulfilling the project's objectives.     

Long-Term Variability in Bioassessments: A Twenty-Year Study from Two Northern California Streams

Long-term variability of bioassessments has not been well evaluated. We analyzed a 20-year data set (1984–2003) from four sites in two northern California streams to examine the variability of bioassessment indices (two multivariate RIVPACS-type O/E scores and one multimetric index of biotic integrity, IBI), as well as eight metrics. All sites were sampled in spring; one site was also sampled in summer. Variability among years was high for most metrics (coefficients of variation, CVs ranging from 16% to 246% in spring) but lower for indices (CVs of 22–26% for the IBI and 21–32% for O/E scores in spring), which resulted in inconsistent assessments of biological condition. Variance components analysis showed that the time component explained variability in all metrics and indices, ranging from 5% to 35% of total variance explained. The site component was large (i.e., >40%) for some metrics (e.g., EPT richness), but nearly absent from others (e.g., Diptera richness). Seasonal analysis at one site showed that variability among seasons was small for some metrics or indices (e.g., Coleoptera richness), but large for others (e.g., EPT richness, O/E scores). Climatic variables did not show consistent trends across all metrics, although several were related to the El Ni?o Southern Oscillation Index at some sites. Bioassessments should incorporate temporal variability during index calibration or include climatic variability as predictive variables to improve accuracy and precision. In addition, these approaches may help managers anticipate alterations in reference streams caused by global climate change and high climatic variability.     

Effects of improved spatial and temporal modeling of on-road vehicle emissions

Numerous emission and air quality modeling studies have suggested the need to accurately characterize the spatial and temporal variations in on-road vehicle emissions. The purpose of this study was to quantify the impact that using detailed traffic activity data has on emission estimates used to model air quality impacts. The on-road vehicle emissions are estimated by multiplying the vehicle miles traveled (VMT) by the fleet-average emission factors determined by road link and hour of day. Changes in the fraction of VMT from heavy-duty diesel vehicles (HDDVs) can have a significant impact on estimated fleet-average emissions because the emission factors for HDDV nitrogen oxides (NOx) and particulate matter (PM) are much higher than those for light-duty gas vehicles (LDGVs). Through detailed road link-level on-road vehicle emission modeling, this work investigated two scenarios for better characterizing mobile source emissions: (1) improved spatial and temporal variation of vehicle type fractions, and (2) use of Motor Vehicle Emission Simulator (MOVES2010) instead of MOBILE6 exhaust emission factors. Emissions were estimated for the Detroit and Atlanta metropolitan areas for summer and winter episodes. The VMT mix scenario demonstrated the importance of better characterizing HDDV activity by time of day, day of week, and road type. More HDDV activity occurs on restricted access road types on weekdays and at nonpeak times, compared to light-duty vehicles, resulting in 5-15% higher NOx and PM emission rates during the weekdays and 15-40% lower rates on weekend days. Use of MOVES2010 exhaust emission factors resulted in increases of more than 50% in NOx and PM for both HDDVs and LDGVs, relative to MOBILE6. Because LDGV PM emissions have been shown to increase with lower temperatures, the most dramatic increase from MOBILE6 to MOVES2010 emission rates occurred for PM2.5 from LDGVs that increased 500% during colder wintertime conditions found in Detroit, the northernmost city modeled.