A Systematic Framework for the Design and Implementation of a Quality Management Practice: The Case of a Consulting Engineering Company

Company productivity and competitiveness in today's marketplace requires creative design, innovation, and the reduction of nonconformances, which require costly rework and can damage a firm's reputation with its customers and potential customers. Using the International Organisation of Standardization's (ISO) 9000 and 14000 series of standards, the authors of this article walk readers through the rigorous process of obtaining upper management buy‐in and sponsorship and engaging workers in a bottom‐up approach to establish the procedures necessary to perform world‐class engineering services.     

Human perceptions of landscape change: The case of a monodominant forest of <Emphasis Type="Italic">Attalea speciosa</Emphasis> Mart ex. Spreng (Northeast Brazil)

From the perception of human populations, we can assess the changes occurring in certain landscapes and the factors that cause those changes. Such studies have proven helpful in increasing the knowledge of the history of a landscape, recognizing past formations and projecting its future. Our research objective was to determine how a landscape dominated by the palm tree Attalea speciosa, a species of ecological, economic, and cultural importance, has been changing over time by synthesizing and comparing historical documents and local perceptions. This study was conducted in Araripe Environmental Protection Area, Northeast Region, Brazil. To understand local landscape change, we interviewed active harvesters in four communities in which A. speciosa use has been documented. Historical documents were evaluated as a complement to the interview data. According to local informants, areas previously used for cultivation and animal husbandry that were abandoned or decimated by droughts in the region may have fostered the expansion of a monodominant A. speciosa forest. Furthermore, other forms of landscape management resulting from human population growth may also have affected the current and past distribution of this forest.     

A recreational water quality index using chemical, physical and microbiological parameters

Purpose

The aim of this paper was to develop a new recreational water quality index (RWQI) as a tool to ensure the health of swimmers and to take practical decisions.

Methods

RWQI was elaborated with epidemiological data, and we carried out an exhaustive study of the different guidelines for recreational waters proposed by different organisations around the world. Different parameters were chosen, considering, as a priority, the swimmer??s contact and the possibility of ingestion of water during the recreational activity. Furthermore, rating curves were established for pH, chemical oxygen demand, nitrate, phosphate, detergents, enterococci, total coliforms, faecal coliforms and Escherichia coli.

Results and conclusions

The index was applied to the data set on water quality of the Potrero de los Funes River (San Luis, Argentina), generated during 2 years (2009?C2010). Following the RWQI values classification, most of the Potrero de los Funes water samples fell in the good quality range during the study period.     

Leachates from solid wastes: chemical and eco(geno)toxicological differences between leachates obtained from fresh and stabilized industrial organic sludge

The chemical and ecotoxicological characteristics of fresh and stabilized industrial organic sludge leachates were compared to obtain information regarding how the stabilization process can influence the ecotoxic potential of this industrial waste, which could be used for the amendment of degraded soil. Physicochemical analysis of the sludge leachates, as well as a battery of eco(geno)toxicity tests on bacteria, algae, daphnids, and higher plants (including Vicia faba genotoxicity test) and the determination of hydrolytic enzyme activity, was performed according to standard methods. The chemical comparison of the two types of leachate showed that the samples obtained from stabilized sludge had a lower organic content and higher metal content than leachates of the fresh sludge. The eco(geno)toxicological results obtained with aquatic organisms showed that the stabilized sludge leachate was more toxic than the fresh sludge leachate, both originating from the same industrial organic sludge sample. Nevertheless, phytotoxicity tests carried out with a reference peat soil irrigated with stabilized sludge leachate showed the same toxicity as the fresh sludge leachate. In the case of the industrial solid organic sludge studied, stabilization through a biodegradation process promoted a higher metal mobility/bioavailability/eco(geno)toxicity in the stabilized sludge leachate compared to the fresh sludge leachate.     

Evaluation of the effectiveness of red mud-supported catalysts in combination with ozone and TiO<Subscript>2</Subscript> in the treatment of solution containing benzene,toluene, and xylene

Ozone and a Fe²⁺/TiO₂-based catalyst were examined in the degradation of a synthetic solution of benzene toluene and xylene (BTX) in an advanced oxidation process (AOP). The catalyst beads were made from the slurry waste of aluminum production process, by inserting the TiO₂ content and subsequent calcination. The reduction of the BTX concentration load was monitored by the reduction of chemical oxygen demand (COD) and BTX concentration. Different levels were used on factors: pH, time of treatment, initial concentration of BTX, and percentage of TiO₂. The process was conducted in a bubble column reactor with the insertion of catalyst beads. A response surface methodology technique (CCD) was used to build a model based on COD reduction results. The model was optimized using the normal-boundary intersection (NBI) algorithm to maximize COD reduction and minimize the variance attributed to the process. Optimization led to COD reductions of 80% in 2 h of experiment. Correlation analysis of coefficient models from experimental data R²_adj was 0.9966, showing a good fit of model data. In the optimized conditions, the possible increase of the biodegradability ratio of the BTX solution, through the biochemical oxygen demand (BOD) and COD, was also analyzed. Under pre-treatment conditions, the BOD/COD ratio was 0.13. After the treatment, it increased to 0.56.

Open image in new window

Graphical abstract ?

     

Characterization of atmospheric aerosols in the city of S?o Paulo, Brazil: comparisons between polluted and unpolluted periods

The objective of this study was to determine the size and composition of atmospheric aerosols in the downtown area of the city of S?o Paulo, Brazil, for a polluted and an unpolluted period. Aerosols were sampled with a portable air sampler (PAS), Micro-Orifice Uniform Deposit Impactor (MOUDI), and Scanning Mobility Particle Sizer. At the study site, air quality is poor, especially during the winter, high concentrations of pollutants being emitted primarily by the light- and heavy-duty vehicle fleet. We analyzed mass, black carbon (BC), Al, Si, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Br, Rb, Sn, Zr, and Pb. During the polluted period, diurnal PM₁₀ was higher than nocturnal PM₁₀, whereas the inverse was true during the unpolluted period. The FPM was rich in BC, S, and Pb, whereas CPM was rich in Al, Si, Ca, Ti, and Fe. Mass balance was performed by category: ammonium sulfate, sodium chloride, crustal material, BC, and other. The PAS-determined FPM was mainly BC. The MOUDI-determined FPM crustal material explained more mass than did ammonium sulfate and BC during the polluted period, whereas ammonium sulfate had the largest mass during the unpolluted period. Crustal material was the major CPM component, followed by ammonium sulfate and BC. During the unpolluted period, FPM concentrations were lower, whereas those of ammonium sulfate were relatively higher, especially at night, and particle number was inversely proportional to particle size. Aerosol growth was more intense during the polluted period.     

Ultracentrifugation as a direct method to concentrate viruses in environmental waters: virus-like particle enumeration as a new approach to determine the efficiency of recovery

Some health important enteric viruses are considered to be emerging waterborne pathogens and so the improvement of detection of these viruses in the aquatic environment is one of the most important steps in dealing with these pathogens. Since these viruses may be present in low numbers in water, it is necessary to concentrate water samples before viral detection. Although there are several methods to concentrate viruses in environmental waters, all present some drawbacks and consequently the method should be chosen that, despite its limitations, is adequate to achieve the aim of each study. As the effectiveness of the concentration methods is evaluated by determining the efficiency of viral recovery after concentration, it is important to use a simple and effective approach to evaluate their recovery efficiency. In this work ultracentrifugation, usually used as a secondary step for virus concentration, was evaluated as the main method to concentrate directly viruses in environmental water samples, using the microscopic enumeration of virus-like particles (VLP) as a new approach to estimate the efficiency of recovery. As the flocculation method is currently employed to concentrate viruses in environmental waters, it was also used in this study to assess the efficiency of the ultracentrifugation as the main viral concentration method in environmental waters. The results of this study indicate that ultracentrifugation is an adequate approach to concentrate viruses directly from environmental waters (recovery percentages between 66 and 72% in wastewaters and between 66 and 76% in recreational waters) and that the determination of VLP by epifluorescence microscopy is a simple, fast and cheap alternative approach to determine the recovery efficiency of the viral concentration methods.     

Effects of acetaminophen in oxidative stress and neurotoxicity biomarkers of the gastropod Phorcus lineatus

Environmental Science and Pollution Research - The growing use of pharmaceutical drugs has become a major environmental issue considering that these substances (or their metabolites) end up...     

Organochlorine pesticides and polychlorinated biphenyls in soil and water samples in the Northeastern part of São Paulo State, Brazil

Detailed analyses of persistent organic pollutants (POPs) such as organochlorine pesticides (OCPs), hexachlorocyclohexane (HCH) isomers (HCHs), dichlorodiphenyltrichloro ethane (DDT) and its metabolites (DDTs) and congeners of polychlorinated biphenyls (PCBs) in soil and surface water from the northeastern São Paulo, Brazil allowed the evaluation of the contamination status, distribution and possible pollution sources. The pesticides and PCBs demonstrated markedly different distributions, reflecting different agricultural, domestic and industrial usage in each region studied. The ranges of HCH, DDT, and PCBs concentrations in the soil samples were 0.05–0.92, 0.12–11.01, 0.02–0.25 ng g⁻¹ dry wt, respectively, and in the surface water samples were 0.02–0.6, 0.02–0.58 and 0.02–0.5 ng l⁻¹, respectively. Overall elevated levels of DDT and PCB were recorded in region 2, a site very close to melting, automotive batteries industries, and agricultural practice regions. High ratios of metabolites of DDT to DDT isomers revealed the recent use of DDT in this environment. The sources of contamination are closely related to human activities, such as domestic and industrial discharge, street runoff, agricultural pesticides and soil erosion, due to deforestation as well as atmospheric transport.