Development of urban planning guidelines for improving emergency response capacities in seismic areas of Iran

This paper presents the results of research carried out to improve emergency response activities in earthquake-prone areas of Iran. The research concentrated on emergency response operations, emergency medical care, emergency transportation, and evacuation—the most important issues after an earthquake with regard to saving the lives of victims. For each topic, some guidelines and criteria are presented for enhancing emergency response activities, based on evaluations of experience of strong earthquakes that have occurred over the past two decades in Iran, notably Manjil (1990), Bam (2003), Firouz Abad-Kojour (2004), Zarand (2005) and Broujerd (2006). These guidelines and criteria are applicable to other national contexts, especially countries with similar seismic and social conditions as Iran. The results of this study should be incorporated into comprehensive plans to ensure sustainable development or reconstruction of cities as well as to augment the efficiency of emergency response after an earthquake.     

High yield room temperature synthesis of pyranochromenes in neutral cetyltrimethylammonium bromide micellar media

Pyrano[3,2-c]chromene derivatives are heterocycles with a wide range of biological properties. There is actually a need for safer synthesis of heterocycles, using for instance water as a solvent. High selectivity can also be achieved by addition of surface-active reagents to form micelles. Indeed, it is presumed that water facilitates organic reactions by the hydrophobic effect, enhanced hydrogen bonding in the transition state and cohesive energy density. Here, a simple aqueous-mediated protocol is developed for the quantitative synthesis of medicinally relevant pyrano[3,2-c]chromene derivatives by the tandem reaction of readily available reagents in cetyltrimethylammonium bromide micellar media. This new method is a modification of the three-component reaction involving Knoevenagel condensation, Michael addition and cyclization reaction. Yields of 3, 4-dihydropyrano[c]chromenes ranged from 85 to 99 % at room temperature.     

Upper trapezius fatigue in carpet weaving: the impact of a repetitive task cycle

Introduction. Shoulder disorders are one of the most prevalent musculoskeletal disorders among carpet weavers. The most important cause of these disorders is muscle fatigue. The aim of the present study is to investigate the effect of carpet weaving characteristics on upper trapezius (UTr) muscle fatigue during a task cycle. Method. In this cross-sectional study, 9 women and 3 men participated. During an 80-min cycle of carpet weaving, a times-series model was applied to assess electromyography amplitude and frequency changes. Result. According to the joint analysis of electromyogram spectrum and amplitude method, the participants experienced 0% force decrease, 0.9% recovery, 18% force increase and 72% fatigue in the left UTr. Furthermore, the rates of force decrease, recovery, force increase and fatigue in the right UTr were 18%, 18%, 18% and 45%, respectively. Fatigue in the right and the left UTr was reported to be the dominant state during one carpet weaving task cycle. Conclusion. Task cycle appears to have a significant impact on UTr fatigue in participants, and UTr fatigue can be considered a serious risk factor in shoulder musculoskeletal disorders. Hence, further studies should focus on better workstations and work–rest periods during various subtasks.     

Health risk assessment of occupational exposure to styrene in Neyshabur electronic industries

Environmental Science and Pollution Research - Styrene is one of the essential components in making thousands of everyday products. Occupational exposure to styrene causes pulmonary, neurological,...     

Preceding crop affects grain cadmium and zinc of wheat grown in saline soils of central Iran

Enhanced Cd concentrations in wheat (Triticum aestivum L.) grain produced on saline soils of central Iran have been recently reported. Because wheat bread is a major dietary component for the Iranian people, practical approaches to decrease Cd concentration in wheat grain were investigated. This study investigated the influence of sunflower-wheat vs. cotton-wheat rotations on extractable Cd and on Cd uptake by wheat in these salt-affected soils. Two fields with different levels of Cd contamination (1.5 and 3.2 mg total Cd kg(-1) dry soil) were cropped with different rotations (cotton-wheat and sunflower-wheat) in Qom province, central Iran. Seeds of cotton (Gossypium L.) or sunflower (Helianthus annuus L. cv. Record) were planted in plots. After harvesting of the plants and removal of crop residues, wheat (cv. Rushan) was seeded in all plots. For both studied soils, the concentrations of Cd extracted by 0.04 M EDTA and 1 M CaCl(2) were significantly (P < or = 0.05) greater after cotton than after sunflower. Accordingly, the total amount of Cd in sunflower shoot was significantly (P < or = 0.05) greater than in the cotton shoot. Shoot Cd content in wheat plants grown after cotton and sunflower were significantly different; wheat shoots after cotton accumulated more Cd (two to four times) than after sunflower. Wheat grain Cd concentration after sunflower was much lower (more than seven times) than after cotton. The results of this study showed that sunflower in rotation with wheat in salt-affected soils of central Iran significantly reduced the risk of Cd transfer to wheat grain.     

50 Hz alternating extremely low frequency magnetic fields affect excitability,firing and action potential shape through interaction with ionic channels in snail neurones

In spite of growing concern about the influence of magnetic fields on biological systems, the interaction between extremely low frequency magnetic field (ELF magnetic fields) and biological structures at the cellular level remains obscure. The aim of this study was to investigate if 50 Hz magnetic fields could have an effect on the neuronal excitability and firing responses. Under Current-Clamp condition, exposure to 50 Hz ELF magnetic fields at 2 mT or 0.8 mT intensities resulted in an increase in the peak amplitude of action potential and after hyperpolaization potential in a time dependent manner. Both magnetic field intensities decreased also the firing frequency and the duration of action potential. Taken together, these data suggest that 50 Hz ELF magnetic fields at 2 mT or 0.8 mT intensities may change the electrophysiological behavior of neuronal cells and underlying ion channel currents.     

Simultaneous effect of shift work on blood pressure and lipid profile: a path analysis

The aim of this study was to assess the direct and indirect effects of shift work (SW) on the systolic blood pressure (SBP) and lipid profile of male workers. For this purpose, a cross-sectional study was conducted involving 6539 male workers of Esfahan Mobarakeh Steel Company. From all of the participants, 3065 (46.8%) were day workers and the remainder were shift workers. The results of path analysis revealed that the most effective variables on SBP were body mass index, fasting blood sugar, triglycerides and SW with a total effect of 0.241, 0.095, 0.064 and 0.056, respectively.     

A sustainable method for optimizing product design with trade-off between life cycle cost and environmental impact

In today’s competitive market, corporations have learned that taking sustainability issues into account can significantly improve their public image. Modern producers therefore must simultaneously reduce the environmental impact of their products and make economic gains. Therefore, making trade-offs between economic and environmental issues is required to ensure a company’s continuity. In doing so, companies have attached a great deal of importance to the new product design phase. However, optimization at the design stage becomes very complex for a product with a large number of parts, which can have several design alternatives with similar forms and functionality, but different costs and environmental impacts. In the automobile, shipbuilding and aircraft industries, if the conventional complete enumeration method is applied, the time required for selecting the optimal combination of design alternatives with respect to life cycle cost and environmental impact may exceed a human’s natural life span. To overcome this limitation, this paper introduces an optimization method for use as a design aid tool that enables a designer to assess the life cycle cost and environmental impact of his/her design very early in the product development process. To support the developed method, an illustration is provided using a case study on a locally manufactured automobile.     

Physiological characteristics of <Emphasis Type="Italic">Plantago major</Emphasis> under SO<Subscript>2</Subscript> exposure as affected by foliar iron spray

Sulfur dioxide (SO₂) is considered as a main air pollutant in industrialized areas that can damage vegetation. In the present study, we investigated how exposure to SO₂ and foliar application of iron (Fe) would affect certain physiological characteristics of Plantago major. The plant seedlings exposed or unexposed to SO₂ (3900 μg m^?3) were non-supplemented or supplemented with Fe (3 g L^?1) as foliar spray. Plants were exposed to SO₂ for 6 weeks in 100 × 70 × 70 cm chambers. Fumigation of plants with SO₂ was performed for 3 h daily for 3 days per week (alternate day). Lower leaf Fe concentration in the plants exposed to SO₂ at no added Fe treatment was accompanied with incidence of chlorosis symptoms and reduced chlorophyll concentration. No visible chlorotic symptoms were observed on the SO₂-exposed plants supplied with Fe that accumulated higher Fe in their leaves. Both at with and without added Fe treatments, catalase (CAT) and peroxidase (POD) activity was higher in the plants fumigated with SO₂ in comparison with those non-fumigated with SO₂. Foliar application of Fe was also effective in increasing activity of antioxidant enzymes CAT and POD. Exposure to SO₂ led to reduced cellulose but enhanced lignin content of plant leaf cell wall. The results obtained showed that foliar application of Fe was effective in reducing the effects of exposure to SO₂ on cell wall composition. In contrast to SO₂, application of Fe increased cellulose while decreased lignin content of the leaf cell wall. This might be due to reduced oxidative stress induced by SO₂ in plants supplied with Fe compared with those unsupplied with Fe.