Temporospatial variation and health risk assessment of trihalomethanes (THMs) in drinking water (northwest Iran)

Environmental Science and Pollution Research - Trihalomethanes (THMs) are one of the most common classes of disinfection by-products. In this study, the temporospatial trends and health risks due...     

Tetracycline removal enhancement with Fe-saturated nanoporous montmorillonite in a tripartite adsorption/desorption/photo-Fenton degradation process

The adsorption and photo-Fenton degradation of tetracycline (TC) over Fe-saturated nanoporous montmorillonite was analyzed. The synthesized samples were characterized using XRD, FTIR, SEM, and XRF analysis, and the adsorption and desorption of TC onto these samples, as well as the antimicrobial activity of TC during these processes, were analyzed at different pH. Initially, a set of adsorption/desorption experiments was conducted, and surprisingly, up to 50% of TC adsorbed was released from Mt structure. Moreover, the desorbed TC had strong antibacterial activity. Then, an acid treatment (for the creation of nanoporous layers) and Fe saturation of the montmorillonite were applied to improve its adsorption and photocatalytic degradation properties over TC. Surprisingly, the desorption of TC from modified montmorillonite was still high up to 40% of adsorbed TC. However, simultaneous adsorption and photodegradation of TC were detected and almost no antimicrobial activity was detected after 180 min of visible light irradiation, which could be due to the photo-Fenton degradation of TC on the modified montmorillonite surface. In the porous structures of modified montmorillonite high, ˙OH radicals were created in the photo-Fenton reaction and were measured using the Coumarin technique. The ˙OH radicals help the degradation of TC as proposed in an oxidation process. Surprisingly, more than 90% of antimicrobial activity of the TC decreased under visible light (after 180 min) when desorbed from nanoporous Fe-saturated montmorillonite compared to natural montmorillonite. To the best of our knowledge, this is the first time that such a high TC desorption rate from an adsorbent with the least residual antimicrobial activity is reported which makes nanoporous Fe-saturated montmorillonite a perfect separation substance of TC from the environment.

     

Evaluation of SARS-CoV-2 in Indoor Air of Sina and Shahid Beheshti Hospitals and Patients' Houses

Food and Environmental Virology - Side by side air sampling was conducted using a PTFE filter membrane as dry sampler and an impinger containing a suitable culture medium as a wet sampler. Most of...     

Bio-based composites from waste agricultural residues

The main objective of this research was to study the potential of waste agricultural residues such as sunflower stalk, corn stalk and bagasse fibers as reinforcement for thermoplastics as an alternative to wood fibers. The effects of two grades (Eastman G-3003 and G-3216) of coupling agents on the mechanical properties were also studied. In the sample preparation, one level of fiber loading (30 wt.%) and three levels of coupling agent content (0, 1.5 and 2.5 wt.%) were used. For overall trend, with addition of both grades of the coupling agents, tensile, flexural and impact properties of the composites significantly improved, as compared with untreated samples. In addition, morphological study revealed that the positive effect of coupling agent on interfacial bonding. The composites treated with G-3216 gave better results in comparison with G-3003. This could be caused by the high melt viscosity of G-3003. In general, bagasse fiber showed superior mechanical properties due to its chemical characteristics.     

A time series analysis of environmental and metrological factors impact on cutaneous leishmaniasis incidence in an endemic area of Dehloran,Iran

The aim of this study was to investigate the relationship between the environmental and metrological variables and cutaneous leishmaniasis (CL) transmission and its prediction in a region susceptible to this disease prevalence using a time series model. The accurate locations of 4437 CL diagnosed from 2011 to 2015 were obtained to be used in the time series model. Temperature, number of days with temperature over 30 °C, and number of earthquake were related to CL incidence using the Seasonal Auto-correlated Integrated Moving Average (SARIMA) model according to the Box-Jenkins method. In addition, the relationship between land use and surface soil type in 500- and 1000-m radius around the CL patients were investigated. The SARIMA models showed significant associations between environmental and meteorological variables and CL incidence adjusted for seasonality and auto-correlation. The result indicated that there are need more robust preventive programs in earthquake-prone areas with high temperature and inceptisol soil type than other areas. In addition, the region with these characteristics should be considered as high-risk areas for CL prevalence.     

Quantification of ionophores in aged poultry litter using liquid chromatography tandem mass spectrometry

Veterinary anticoccidials, biochemically known as ionophores, are widely used in poultry feed at therapeutic levels to treat Coccidiosis and at sub-therapeutic levels for growth- promotion. Commonly used ionophores in the US poultry industry are monensin, salinomycin, lasalocid and narasin. There is an increasing concern regarding the persistence of these anticoccidials in the environment. However, little attention has been directed to methods development for quantitatively measuring ionophores in complex environmental matrices such as poultry litters that are land applied. Here, we describe a rapid and sensitive liquid chromatography tandem mass spectrometry (LC-MS/MS)-based method developed for simultaneous quantification of monensin, lasalocid, salinomycin, and narasin in aged poultry litter samples. Results show significant level of monensin (97.8 ± 3.2 μg kg^?1), lasalocid (19.2 ± 6.6 μg kg^?1), salinomycin (70 ± 2.7 μg kg^?1) and narasin (57.3 ± 2.6 μg kg^?1) in poultry litter stored for over three years at < 5°C. Our findings indicate that even after several years of unmanaged storage of poultry litter, ionophores may continue to persist in this matrix, raising the possibility of prolonged release into the environment.     

Application of Satellite Microwave Images in Estimating Snow Water Equivalent1

Abstract: Flood forecast and water resource management requires reliable estimates of snow pack properties [snow depth and snow water equivalent (SWE)]. This study focuses on application of satellite microwave images to estimate the spatial distribution of snow depth and SWE over the Great Lakes area. To estimate SWE, we have proposed the algorithm which uses microwave brightness temperatures (Tb) measured by the Special Sensor Microwave Imager (SSM/I) radiometer along with information on the Normalized Difference Vegetation Index (NDVI). The algorithm was developed and tested over 19 test sites characterized by different seasonal average snow depth and land cover type. Three spectral signatures derived from SSM/I data, namely T19V‐T37V (GTV), T19H‐T37H (GTH), and T22V‐T85V (SSI), were examined for correlation with the snow depth and SWE. To avoid melting snow conditions, we have used observations taken only during the period from December 1‐February 28. It was found that GTH, and GTV exhibit similar correlation with the snow depth/SWE and are most should be used over deep snowpack. In the same time, SSI is more sensitive to snow depth variations over a shallow snow pack. To account for the effect of dense forests on the scattering signal of snow we established the slope of the regression line between GTV and the snow depth as a function of NDVI. The accuracy of the new technique was evaluated through its comparison with ground‐based measurements and with results of SWE analysis prepared by the National Operational Hydrological Remote Sensing Center (NOHRSC) of the National Weather Service. The proposed algorithm was found to be superior to previously developed global microwave SWE retrieval techniques.     

Tracer diffusion from a horizontal fracture into the surrounding matrix: measurement by computed tomography

The vertical diffusion of NaI solution from a horizontal fracture into and within the surrounding matrix was tracked and quantified over time using an artificially fractured chalk core (30x5 cm) and a second-generation X-ray computed tomography (CT) scanner. The different tracer-penetration distances imaged in the matrix above and below the horizontal fracture are indicative of a greater tracer mass penetrating into the lower matrix. The enhanced transport in the matrix below the fracture was related to the Rayleigh-Darcy instability induced by the density differences between the heavier tracer solution in the fracture (1.038) and the distilled water that had initially resided in the matrix. Our observations suggest that below the fracture, the tracer is propagated by an advection-diffusion process that is characterized by both higher rates and higher concentrations relative to its propagation by diffusion above the fracture. The experimental results suggest that the prediction of contaminant migration in a rock intersected by both vertical and horizontal (e.g. along bedding planes) fractures is difficult because of density effects that result in different solute-penetration rates.     

Dissolution-induced preferential flow in a limestone fracture

Flow in a rock fracture is surprisingly sensitive to the evolution of flow paths that develop as a result of dissolution. Net dissolution may either increase or decrease permeability uniformly within the fracture, or may form a preferential flow path through which most of the injected fluid flows, depending on the prevailing ambient mechanical and chemical conditions. A flow-through test was completed on an artificial fracture in limestone at room temperature under ambient confining stress of 3.5 MPa. The sample was sequentially circulated by water of two different compositions through the 1500 h duration of the experiment; the first 935 h by tap groundwater, followed by 555 h of distilled water. Measurements of differential pressures between the inlet and the outlet, fluid and dissolved mass fluxes, and concurrent X-ray CT imaging and sectioning were used to characterize the evolution of flow paths within the limestone fracture. During the initial circulation of groundwater, the differential pressure increased almost threefold, and was interpreted as a net reduction in permeability as the contacting asperities across the fracture are removed, and the fracture closes. With the circulation of distilled water, permeability initially reduces threefold, and ultimately increases by two orders of magnitude. This spontaneous switch from net decrease in permeability, to net increase occurred with no change in flow rate or applied effective stress, and is attributed to the evolving localization of flow path as evidenced by CT images. Based on the X-ray CT characterizations, a flow path-dependent flow model was developed to simulate the evolution of flow paths within the fracture and its influence on the overall flow behaviors of the injected fluid in the fracture.