Genotoxicity of titanium dioxide (TiO2) nanoparticles at two trophic levels: plant and human lymphocytes

The environmental fate and behaviour of titanium dioxide (TiO(2)) nanoparticles is a rapidly expanding area of research. There is a paucity of information regarding toxic effect of TiO(2) nanoparticles in plants and to certain extent in humans. The present study focuses on the effect of exposure of TiO(2) nanoparticles in two trophic levels, plant and human lymphocytes. The genotoxicity of TiO(2) nanoparticles was evaluated using classical genotoxic endpoints, comet assay and DNA laddering technique. DNA damaging potential of TiO(2) nanoparticles in Allium cepa and Nicotiana tabacum as representative of plant system could be confirmed in the comet assay and DNA laddering experiments. In Allium micronuclei and chromosomal aberrations correlated with the reduction in root growth. We detected increased level of malondialdehyde (MDA) concentration at 4mM (0.9 μM) treatment dose of TiO(2) nanoparticles in Allium cepa. This indicated that lipid peroxidation could be involved as one of the mechanism leading to DNA damage. A comparative study of the cytotoxic and genotoxic potential of TiO(2) nanoparticles and bulk TiO(2) particles in human lymphocytes also reveal interesting results. While TiO(2) nanoparticles were found to be genotoxic at a low dose of 0.25 mM followed by a decrease in extent of DNA damage at higher concentrations; bulk TiO(2) particles reveal a more or less dose dependent effect, genotoxic only at dose 1.25 mM and above. The study thus confirms the genotoxic potential of TiO(2) nanoparticles in both plant and human lymphocytes.     

Fly ash scrubbing in a novel dual flow scrubber

Scrubbers are used as particulate emission control devices with the increase in stringency of old regulations or promulgation of new regulations. Scrubbing of fly ash in a novel dual flow scrubber, i.e., one water filled bubble section and one section with water-spray, is reported in this article. The presented system included a tapered section in order to achieve the bubble regime. On the other hand, a two-phase critical flow atomizer was used for the generation of spray regime with high degree of spray uniformity. Experiments were carried out for studying the behavior of the system in terms of various pertinent variables. The fly ash removal mechanism was explained in terms of various physical interactions. Electrostatic effect was found to have an insignificant influence on the collection efficiency of fly ash. The removal efficiency was found to decrease with the increase in inlet fly ash loading in the bubble section while it was increased in the spray section. A compromise must, therefore, be struck while operating the scrubber for achieving the desired performance. The effects of other operating variables studied on the removal efficiency remained similar in the regimes under investigation. The combined effect was, however, that the spray regime was dominating. Experimentation also revealed that the bubble section collected particles down to 20 microm size. Detailed experimentation revealed that almost 100% removal efficiency (zero penetration) of fly ash could be achieved in the dual flow scrubber at a QL/QG ratio of 3.0 m3/1000 ACM (actual cubic meter). Almost zero penetration of fly ash particles, clearly demonstrated that the dual flow scrubber with its staging operations met with the stricter emission regulations for particulate matter. Selection of any particulate control device is intrinsically related to the performance as a function of various pertinent variables of the system. Correlations were, therefore, put forward for the prediction of the performances of the bubble and the spray sections in terms of various pertinent variables of the system. The overall removal efficiency achievable in the dual flow scrubber was predicted with the help of these correlations. The predicted values were in excellent agreement with the experimental values (well within +/-5.0% deviation). Comparison of the performance of the present system with the existing systems indicated that the bubble and spray sections either alone or in combination (as in a dual flow scrubber), was energy and efficiency-wise much better than the existing systems. The novelty of the system is also described.     

Characterization of different road dusts in opencast coal mining areas of India

Dust from haul and transport roads are the major source of air pollution in opencast coal mining areas. Dust generated during mining operations pollutes air which causes different health problems. Various available techniques are implemented in the field to minimize and control dust in mining areas. However, they are not very effective because dust deposited on road surfaces are not removed by these techniques. For effective control of dust in opencast mining areas, it has to be regularly collected from road surfaces and may be converted into solid form, and subsequently can be used as a domestic fuel considering its physicochemical properties. The present paper describes a comparative study of qualitative and quantitative aspects of road dust samples of four coalfields of India. The pH of the dust was found to be in the range of 5.1–7.7. Moisture, ash, volatile matter, fixed carbon, water-holding capacity, bulk density, and specific gravity of dust samples were found to be in the range of 0.5–3.0%, 45–76%, 12.6–20.0%, 10.2–45.3%, 21.17–31.71%, 1.15–1.70, and 1.73–2.30 g cm⁻³, respectively. Observing the overall generation and characteristics of coal dust, it is suggested that coal dust from haul and transport roads of mining areas can be effectively collected and used as domestic fuel.     

Toxicity,uptake, and accumulation of nano and bulk cerium oxide particles in <Emphasis Type="Italic">Artemia salina</Emphasis>

Although the toxicological impact of metal oxide nanoparticles has been studied for the last few decades on aquatic organisms, the exact mechanism of action is still unclear. The fate, behavior, and biological activity of nanoparticles are dependent on physicochemical factors like size, shape, surface area, and stability in the medium. This study deals with the effect of nano and bulk CeO₂ particles on marine microcrustacean, Artemia salina. The primary size was found to be 15 ± 3.5 and 582 ± 50 nm for nano and bulk CeO₂ (TEM), respectively. The colloidal stability and sedimentation assays showed rapid aggregation of bulk particles in seawater. Both the sizes of CeO₂ particles inhibited the hatching rate of brine shrimp cyst. Nano CeO₂ was found to be more toxic to A. salina (48 h LC₅₀ 38.0 mg/L) when compared to bulk CeO₂ (48 h LC₅₀ 92.2 mg/L). Nano CeO₂-treated A. salina showed higher oxidative stress (ROS) than those treated with the bulk form. The reduction in the antioxidant activity indicated an increase in oxidative stress in the cells. Higher acetylcholinesterase activity (AChE) was observed upon exposure to nano and bulk CeO₂ particles. The uptake and accumulation of CeO₂ particles were increased with respect to the concentration and particle size. Thus, the above results revealed that nano CeO₂ was more lethal to A. salina as compared to bulk particles.     

Nanotechnology applications and intellectual property rights in agriculture

Nanotechnology research uses specific properties of materials at the nanoscale to develop improved materials, devices, systems and therapeutics. There is a risk of overlapping patent claims and lack of distinction between nano-based and traditional patents due to the interdisciplinary nature of nanotechnology. There is an increasing trend of granted patents. The World Intellectual Property Organization and World Health Organization, regulatory and policy bodies, are working to make a comprehensive property right regulation for nanotechnology products. The USA, the leader of nanotechnology products, has made guidelines to make patent search easier for nano-based products. The European Patent Office has also created a new classification for nano-based inventions. Here we review the status of intellectual property rights protection of nanomaterial, environmental implications and application of nanotechnology in agriculture.     

Toxic effect of different types of titanium dioxide nanoparticles on Ceriodaphnia dubia in a freshwater system

Environmental Science and Pollution Research - In the current study, the effect of different types of titanium dioxide (TiO2) nanoparticles (NPs) (rutile, anatase, and mixture) was analyzed on...     

Differential sensitivity of marine algae Dunaliella salina and Chlorella sp. to P25 TiO2 NPs

Environmental Science and Pollution Research - The use of P25 TiO2 NPs in consumer products, their release, and environmental accumulation will have harmful effects on the coastal ecosystems. The...     

Sorption and desorption of lindane by wood charcoal in fixed‐bed reactor

Abstract

Sorption and desorption of lindane (y‐HCH) by wood charcoal (WC) and wood charcoal treated by 1N HNO₃ (WCT) in fixed‐bed reactor (FBR) were investigated in this study. WCT revealed a better performance than WC, in removing lindane in FBR. The breakthrough of lindane was significantly affected by the size of WCT, flow rate to the FBR, and depth of WCT bed. The removal of lindane in the presence of mixture of other pesticides was considerably reduced. The design parameters for FBR were calculated based on the bed‐depth service time (BDST) approach. Many parameters Viz. depth of sorption zone, velocity of sorption, sorbent use rate, critical bed‐depth, bed efficiency, and service time, were determined for design of the fixed‐bed. Using the material balance principle, the characteristics of the wave‐front were evaluated and found that the wave‐front velocity is approximately equal to the sorption velocity determined from the BDST approach. Desorption studies were performed in dilute organic solvent media and they gave an excellent performance in regeneration process.     

Phototransformation of chlorimuron-ethyl on leaf surface

Chlorimuron-ethyl, a post-emergent herbicide selectively used in soybean and maize, degrades mainly through chemical hydrolysis. Photolysis has also an important role in the degradation of this compound. Phototransformation of chlorimuron-ethyl takes place through the cleavage of the sulfonylurea bridge, dechlorination, de-esterification and cyclization. Enzymatic de-esterification usually takes place in plant system to liberate the free acid, chlorimuron, which, in fact, inhibits the acetolactate synthase enzyme. In the non-enzymatic environment, de-esterification generally does not occur at normal pH and in moisture-free medium. But on the leaf surface of maize crop de-esterification of chlorimuron-ethyl takes place. The moisture deposited on leaf surfaces by virtue of evapo-transpirational loss of water may cause the de-esterification of chlorimuron-ethyl to the free acid, chlorimuron.