Superoxide dismutase in the marine sponge <Emphasis Type="Italic">Cliona celata</Emphasis>

The aim of this work is to investigate the activity of the antioxidant enzyme superoxide dismutase in the cosmopolitan sponge Cliona celata (Grant, 1826), since this enzyme has been described as a useful biomarker for marine pollution in other marine invertebrates. The quantification of the catalytic activity for superoxide dismutase is quite complex because its substrate is an unstable free radical. Several methods have been developed for this enzymatic activity determination; most of them are based on inhibition of a redox reaction involving the superoxide radical. In this work, two methods are compared, for crude sponge extracts, as far as repeatability, reproducibility and sensibility are concerned. The adrenaline oxidation method seems to be the most adequate for these determinations. Statistical treatment of the data indicates that the reference value for the specific superoxide dismutase activity in C. celata should be in the interval [0–535.5] U/mg of total protein in wet tissues, for normal populations.     

Radio tagging reveals the roles of corpulence,experience and social information in ant decision making

Ant colonies are factories within fortresses (Oster and Wilson 1978). They run on resources foraged from an outside world fraught with danger. On what basis do individual ants decide to leave the safety of the nest? We investigated the relative roles of social information (returning nestmates), individual experience and physiology (lipid stores/corpulence) in predicting which ants leave the nest and when. We monitored Temnothorax albipennis workers individually using passive radio-frequency identification technology, a novel procedure as applied to ants. This method allowed the matching of individual corpulence measurements to activity patterns of large numbers of individuals over several days. Social information and physiology are both good predictors of when an ant leaves the nest. Positive feedback from social information causes bouts of activity at the colony level. When certain social information is removed from the system by preventing ants returning, physiology best predicts which ants leave the nest and when. Individual experience is strongly related to physiology. A small number of lean individuals are responsible for most external trips. An individual’s nutrient status could be a useful cue in division of labour, especially when public information from other ants is unavailable.     

Modelling the temperature and the phytoplankton distributions at the Aveiro near coastal zone,Portugal

The main objective of this paper is to implement a coupled three-dimensional physical and ecological model for the Aveiro coast, and to apply it to study the temperature and the phytoplankton biomass spatial distributions along the coastal ecosystem. The Aveiro coast is located at Portugal within the upwelling system of the Atlantic Iberian coast, characterized by nutrients availability and phytoplankton biomass accumulation, from April to October. In order to implement the ecological model, its validation was assessed by comparing simulations to data relative to the horizontal and vertical distributions of the temperature, nutrients and phytoplankton biomass, obtained during the CICLOS I survey off the Portuguese coast [Moita, M.T., 2001. Estrutura, Variabilidade e Dinâmica do Fitoplâncton na Costa de Portugal Continental. PhD Thesis. Faculdade de Ciências da Universidade de Lisboa, 272 pp.]. A sensitivity analysis of the model has been performed in order to assess the influence of the main ecological model variables. The simulation results show that the model is capable of predicting realistic the temperature, the nutrients and the chlorophyll-a distributions for the study area. The scenarios evidence the setup of a thermal stratification pattern resulting from the upwelling of deep and rich in nutrients water to the surface layer and a chlorophyll-a maxima extending offshore, along the picnocline and the nutricline. The results confirm the crucial role played by the physical processes in the phytoplankton bloom along the Aveiro coast. They also evidence the close link between the surface phytoplankton distribution and the surface temperature distribution.     

Methodology for quantification of waste generated in Spanish railway construction works

In the last years, the European Union (EU) has been focused on the reduction of construction and demolition (C&D) waste. Specifically, in 2006, Spain generated roughly 47million tons of C&D waste, of which only 13.6% was recycled. This situation has lead to the drawing up of many regulations on C&D waste during the past years forcing EU countries to include new measures for waste prevention and recycling. Among these measures, the mandatory obligation to quantify the C&D waste expected to be originated during a construction project is mandated. However, limited data is available on civil engineering projects. Therefore, the aim of this research study is to improve C&D waste management in railway projects, by developing a model for C&D waste quantification. For this purpose, we develop two equations which estimate in advance the amount, both in weight and volume, of the C&D waste likely to be generated in railway construction projects, including the category of C&D waste generated for the entire project.     

Composition of plastics from waste electrical and electronic equipment (WEEE) by direct sampling

This paper describes a direct analysis study carried out in a recycling unit for waste electrical and electronic equipment (WEEE) in Portugal to characterize the plastic constituents of WEEE. Approximately 3400 items, including cooling appliances, small WEEE, printers, copying equipment, central processing units, cathode ray tube (CRT) monitors and CRT televisions were characterized, with the analysis finding around 6000 kg of plastics with several polymer types. The most common polymers are polystyrene, acrylonitrile-butadiene-styrene, polycarbonate blends, high-impact polystyrene and polypropylene. Additives to darken color are common contaminants in these plastics when used in CRT televisions and small WEEE. These additives can make plastic identification difficult, along with missing polymer identification and flame retardant identification marks. These drawbacks contribute to the inefficiency of manual dismantling of WEEE, which is the typical recycling process in Portugal. The information found here can be used to set a baseline for the plastics recycling industry and provide information for ecodesign in electrical and electronic equipment production.     

How experienced individuals contribute to an improvement in collective performance in ants

Certain groups of organisms are capable of improving their collective performance with experience. In a recent study, we demonstrated that, over successive emigrations, colonies of the ant Temnothorax albipennis are able to improve their collective performance by reducing the time taken to complete an emigration (Langridge et al., Behav Ecol Sociobiol 56:523–529, 2004). In this paper, by recording the performance of individually marked workers during repeated emigrations, we were able to analyse some of the ways in which time gains are achieved. We found that: (1) those transporters that also transported in the preceding emigration began to transport earlier in the current emigration and, in the majority of emigrations, transported more items than those transporters that had not transported in the preceding emigration; (2) the time that elapsed before the first item was transported into the new nest reduced over successive emigrations, and this first item was, in the majority of emigrations, carried by a transporter that had also transported in the preceding emigration; (3) the number of adults that were transported reduced over successive emigrations. Our results strongly suggest that the behaviour of transporters that also transported in a preceding emigration may be modified as a result of their experience and that, consequently, their efforts in the next emigration make a major contribution to the improved performance of the colony as a whole.     

A safety analysis of roundabouts and turbo roundabouts based on Petri nets

Objective: In this work, a roundabout and a turbo roundabout model are compared and previous modeling with continuous Petri nets and safety are analyzed through indicators of complexity. Petri nets are a graphic and mathematical representation that allow a faithful modeling of urban systems.

Method: The methodology has been designed for the transformation of a real system to small subgraphs that represent the maneuvers in roundabouts, approximated as roads and lanes of incorporation. Places within the roundabout have been located and defined as continuous places from their influence and visibility toward adjacent conditions. The transitions have been modeled by time and inhibitory arcs, which represent priorities and areas where drivers must pay attention. The created networks represent a faithful model of vehicle flow trajectories in the roundabouts.

Results: The methodology is applied to the same real road intersection. The case study is a recent transformation from roundabout to turbo roundabout. The roundabout network complexity is corroborated by a greater number of entries and exits that lead to each roundabout place (reflected in the maneuvers that can be performed) and a greater number of inhibiting arcs. In most of the turbo roundabout places, the driver’s only option is reduced to occupying next place. The possibility of choosing between several places supposes a greater trajectory intersection and an increased time for decision making. The only situation where the complexity is the same between both systems is when a vehicle accesses the inner lane of the roundabout from the left lane on a single-lane road. The main maneuvers causing accidents have been modeled and their solution in a turbo roundabout is presented.

Conclusions: The reduced complexity of the turbo roundabout is due to the strict limitations in lane changes, turning turbo roundabouts into a safer model: A lower number of possible movements that can be performed by drivers and a smaller number of trajectories with collision risk. Petri nets have proven to be perfectly applicable to the representation of traffic circular systems (such as roundabouts and turbo roundabouts) and to measure the complexity and security of the system.     

Numerical modelling of uncongested wood transport in the Rienz river

Environmental Fluid Mechanics - The Eulerian–Lagrangian model ORSA2D_WT is employed for the simulation of uncongested wood transport, with reference to a field experiment that studied the...     

Characterization of acute toxicity,genotoxicity, and oxidative stress of dimethoate in Rhinella arenarum larvae

Environmental Science and Pollution Research - There is a great concern worldwide about the global decline of amphibians, particularly by agrochemical pollution. The aim of this study was to assess...     

Evaluation of copper-induced DNA damage in Vitis vinifera L. using Comet-FISH

The contamination of soils and water with copper (Cu) can compromise the crops production and quality. Fungicides containing Cu are widely and intensively used in viticulture contributing to environmental contamination and genotoxicity in Vitis vinifera L. Despite the difficulty in reproducing field conditions in the laboratory, hydroponic solutions enriched with Cu (1, 10, 25 and 50 μM) were used in forced V. vinifera cuttings to evaluate the DNA damage in leaves of four wine-producing varieties (‘Tinta Barroca’, ‘Tinto Cão’, ‘Malvasia Fina’ and ‘Viosinho’). Alkaline comet assay followed by fluorescence in situ hybridisation (Comet-FISH) was performed with the 45S ribosomal DNA (rDNA) and telomeric [(TTTAGGG)_n] sequences as probes. This study aimed to evaluate the tolerance of the four varieties to different concentrations of Cu and to determine which genomic regions were more prone to DNA damage. The comet assay revealed comets of categories 0 to 4 in all varieties. The DNA damage increased significantly (p < 0.001) with the Cu concentration. ‘Tinto Cão’ appeared to be the most sensitive variety because it had the highest DNA damage increase in 50 μM Cu relative to the control. Comet-FISH was only performed on slides of the control and 50 μM Cu treatments. Comets of all varieties treated with 50 μM Cu showed rDNA hybridisation on the head, ‘halo’ and tail (category III), and their frequency was significantly higher than that of control. The frequency of category III comets hybridised with the telomeric probe was only significantly different from the control in ‘Malvasia Fina’ and ‘Tinta Barroca’. Comet-FISH revealed partial damage on rDNA and telomeric DNA in response to Cu but also in control, confirming the high sensitivity of these genomic regions to DNA fragmentation.