Adjusting the effect of seasonal variability in the bioassessment of streams

Bioassessment tools should distinguish between the effects of anthropogenic degradation in communities and natural temporal changes. The present study tests the influence of natural seasonal variability on macroinvertebrate stream communities assessed by a predictive model (PORTRIV) and a multimetric index (IPtI) calibrated for spring. The scores of PORTRIV decreased significantly between spring and autumn, and between spring and winter (ca. 37 to 53 %, respectively), while those of IPtI did not change significantly between seasons. For non-reference samples, the results of the predictive model also indicate no significant differences. A correction factor (CF) was calculated to adjust the existing differences in the model assessments between seasons, based on the percentage of variation of reference site scores from spring to autumn and winter. After the application of the CF to the OE50 scores of spring reference samples, the differences were no longer significant. Independent reference validation sites confirmed this tendency. This method has the advantage of avoiding large efforts required for the construction of databases from other seasons and the development of new models to allow the assessment of streams in seasons other than spring. Further tests with models developed in regions with more marked seasonal changes should be done to confirm its wider applicability.     

One-Component Spray Polyurethane Foam from Liquefied Pinewood Polyols: Pursuing Eco-Friendly Materials

The use of petroleum-derived products should be avoided regarding the principles of green and sustainable chemistry. The work reported herein, is aimed at the liquefaction of pine shavings for the production of an environmentally-friendly polyol suitable to be used in the formulations of sprayable polyurethane foams. The biopolyols were obtained in high yield and were used to replace those derived from fossil sources, to produce more “greener” polyurethane foams and therefore, less dependent on petroleum sources, since the polyol component was substituted by products resulting from biomass liquefaction. The partial and fully exchange of the polyols was accomplished, and the results compared with a reference foam. The foams were afterward, chemical, physical, morphological, and mechanically characterized. The complete replacement of polyether polyol and polyol polyester has presented some similar characteristics as that used as a reference, validating that the path chosen for the development of more sustainable materials is on the right track for the contribution to a cleaner world.     

Packed in-tube solid phase microextraction with graphene oxide supported on aminopropyl silica: Determination of target triazines in water samples

On-line in-tube solid phase microextraction (in-tube SPME) coupled to high performance liquid chromatography and tandem mass spectrometry (HPLC-MS/MS) was successfully applied to the determination of selected triazines in water samples. The method based on the employment of a packed column containing graphene oxide (GO) supported on aminopropyl silica (Si) showed that the extraction phase has a high potential for triazines extraction aiming to its physical-chemical properties including ultrahigh specific surface area, good mechanical and thermal stability and high fracture strength. Injection volume and loading time were both investigated and optimized. The method validation using Si-GO to extract and concentrate the analytes showed satisfactory results, good sensitivity, good linearity (0.2–4.0 µg L^?1) and low detection limits (1.1–2.9 ng L^?1). The high extraction efficiency was determined with enrichment factors ranging from 1.2–2.9 for the lowest level, 1.3–4.9 intermediate level and 1.2–3.0 highest level (n = 3). Although the analytes were not detected in the real samples evaluated, the method has demonstrated to be efficient through its application in the analysis of spiked triazines in ground and mineral water samples.     

Trace analysis of parabens preservatives in drinking water treatment sludge,treated, and mineral water samples

Parabens have been widely used as antimicrobial agents, mainly in food products, pharmaceuticals, and cosmetics. Although they are known as safe preservatives, they also cause some harm to human health, which has been discussed lately. Therefore, the aim of this study was to evaluate the occurrence of nine parabens (including isomers) in mineral and drinking waters, besides in drinking water treatment sludge (DWTS) samples with determination by liquid chromatography tandem mass spectrometry (LC-MS/MS). Both methods solid phase extraction (SPE) and QuEChERS were validated. Calibration curves showed a correlation coefficient of 0.99 for all compounds. LOQ values ranged from 0.04 to 4 μg L^?1 in aqueous matrices and from 5 to 500 ng g^?1 in DWTS. Recoveries between 70 and 115% were reached with RSD below 20% for all compounds in SPE whereas recoveries between 62 and 119% were found with RSD below 20% for almost all compounds in QuEChERS. Matrix effect had low values (<?20%); it was only above 20% for methylparaben in the SPE and for pentylparaben in the QuEChERS. Using a quick and simple extraction procedures with SPE, QuEChERS, and LC-MS/MS analyses, these methods proved to be selective and sensitive. They were successfully applied to real samples (treated water, mineral water, and sludge), and methylparaben was detected at concentration levels below 0.242 μg L^?1 in mineral and treated water samples and 10 ng g^?1 in DWTS samples.     

Pollutant versus non-pollutant generation technologies: a CML-analogous analysis

In this work, we apply the Modern Portfolio Theory and the Capital Assets Pricing Model financial tools to a portfolio of CO₂-emitting generation technologies under diverse scenarios. We will calculate the efficient—in the sense of having the minimum risk for a given level of emissions—portfolios frontier. The Capital Market Line (CML) is the place where all the possible combinations of a specific efficient portfolio and a pollution-free portfolio—made up with nuclear and renewable generation technologies—lie. In Finance, that specific efficient portfolio is called the market portfolio but we will see that in our case it lacks an evident meaning. Therefore, we will explain which should be the reference portfolio for power generation planning analysis. Anyway, the fact is that those combinations are less pollutant than the portfolios in the efficient frontier. Thus, a policy-maker can analyse which is their effect on emissions reduction. We will start analysing the efficient pollutant generation portfolios. Then, we will introduce the CML-analogous lines (CML-A) to allow the possibility of reducing emissions by combining an efficient portfolio with a non-pollutant portfolio—this non-pollutant portfolio is free of both emissions and risk. Results support the necessity of considering the carbon capture and storage technology to achieve a less risky generation mix, with less emissions and allowing a higher diversification due to the presence of cleaner fossil fuel technologies. All of that leads to better levels of energy security.     

The Influence of Artificial Photodegradation on Properties of Poly(3-hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-3-hydroxyvalerate)(PHBV)/Graphite Nanosheets (GNS) Nanocomposites

The potential use of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/graphite nanosheets (GNS) as a biodegradable nanocomposite has been explored. PHBV/GNS nanocomposites films were prepared by solution casting at various concentrations of GNS—0.25, 0.50 and 1.00 wt% GNS. The films were exposed to artificial ultraviolet radiation (UV) during 52 h. The effect of GNS on PHBV photodegradation was investigated and compared to neat PHBV film. The artificial photodegradation induced changes in physical (weight loss), chemical carbonyl index by Fourier transform infrared spectroscopy, thermal degree of crystallinity and melting temperature by differential scanning calorimetry and morphological scanning electron microscopy characteristics. Based on the results obtained from aforementioned analyzes it was verified that GNS inhibits the oxidative degradation of PHBV matrix.     

Baked Foams Based on Cassava Starch Coated with Polyvinyl Alcohol with a Higher Degree of Hydrolysis

The aims of this work were to produce trays based on cassava starch, coated with polyvinyl alcohol (PVA) with a higher degree of hydrolysis (98%), and to study the effects of the coating on the mechanical and water sorption properties of the trays. Two types of PVA were tested: SELVOL? 325 (degree of polymerization?=?1000–1500) and SELVOL? 107 (degree of polymerization?=?350–650). A decrease in the water absorption capacity of 50% was observed when the coated samples were compared with the control sample after 30 min of immersion in water. It was observed in both coated samples a reduction of the initial rate of water adsorption sorption and a decrease in hydrophilicity compared with the control sample. Tensile strength and elongation were increased with application of the coatings. The use of the two types of PVA resulted in materials with similar mechanical and water sorption properties.     

Evaluation of give kids a boost: A school-based program to increase booster seat use among urban children in economically disadvantaged areas

Objective: This study evaluated the effectiveness of a series of 1-year multifaceted school-based programs aimed at increasing booster seat use among urban children 4–7 years of age in economically disadvantaged areas.

Methods: During 4 consecutive school years, 2011–2015, the Give Kids a Boost (GKB) program was implemented in a total of 8 schools with similar demographics in Dallas County. Observational surveys were conducted at project schools before project implementation (P₀), 1–4 weeks after the completion of project implementation (P₁), and 4–5 months later (P₂). Changes in booster seat use for the 3 time periods were compared for the 8 project and 14 comparison schools that received no intervention using a nonrandomized trial process.

The intervention included (1) train-the-trainer sessions with teachers and parents; (2) presentations about booster seat safety; (3) tailored communication to parents; (4) distribution of fact sheets/resources; (5) walk-around education; and (6) booster seat inspections.

The association between the GKB intervention and proper booster seat use was determined initially using univariate analysis. The association was also estimated using a generalized linear mixed model predicting a binomial outcome (booster seat use) for those aged 4 to 7 years, adjusted for child-level variables (age, sex, race/ethnicity) and car-level variables (vehicle type). The model incorporated the effects of clustering by site and by collection date to account for the possibility of repeated sampling.

Results: In the 8 project schools, booster seat use for children 4–7 years of age increased an average of 20.9 percentage points between P₀ and P₁ (P₀ = 4.8%, P₁ = 25.7%; odds ratio [OR] = 6.9; 95% confidence interval [CI], 5.5, 8.7; P < .001) and remained at that level in the P₂ time period (P₂ = 25.7%; P < .001, for P₀ vs. P₂) in the univariate analysis. The 14 comparison schools had minimal change in booster seat use. The multivariable model showed that children at the project schools were significantly more likely to be properly restrained in a booster seat after the intervention (OR = 2.7; 95% CI, 2.2, 3.3) compared to the P₀ time period and compared to the comparison schools.

Conclusion: Despite study limitations, the GKB program was positively associated with an increase in proper booster seat use for children 4–7 years of age in school settings among diverse populations in economically disadvantaged areas. These increases persisted into the following school year in a majority of the project schools. The GKB model may be a replicable strategy to increase booster seat use among school-age children in similar urban settings.     

The impact of global change on economic values of water for Public Irrigation Schemes at the São Francisco River Basin in Brazil

Economic values of water for the main Public Irrigation Schemes in the sub-middle region of the São Francisco River Basin, in northeastern Brazil, are determined in this study using an integration of a global agro-economic land and water use (MAgPIE) with a local economic model (Positive Mathematical Programming). As in the latter, the water values depend on the crops grown, and as Brazilian agriculture is strongly influenced by the global market, we used a regionalized version of the global model adapted to the region in order to simulate the crop land use, which is in turn determined by changes in global demand, trade barriers, and climate. The allocation of sugarcane and fruit crops projected with climate change by the global model, showed an impact on the average yields and on the water costs in the main schemes resulting in changes in the water values locally. The economic values for all schemes in the baseline year were higher than the water prices established for agricultural use in the basin. In the future, these water values will be higher in all the schemes. The highest water values currently and in the future were identified in municipalities with a significant proportion of area growing irrigated sugarcane. Being aware of current water values of each user in a baseline year and in a projected future under global climate and socioeconomic changes, decision makers should improve water allocation policies at local scale, in order to avoid conflicts and unsustainable development in the future.     

Influence of community-based natural resource management strategies in the resilience of social-ecological systems

Different social-ecological systems around the world are managed under community-based natural resource management (CBNRM) strategies. This paper analyses how CBNRM strategies influence the resilience of social-ecological systems to the disturbances they face, drawing upon the experience of three Latin American cases (two in Mexico and one in Colombia). The cases differ in their CBNRM approach and in the time these governance systems have been in place. By using a mixed-method approach, we review the socio-ecological history and describe each CBNRM characteristics. We then assess their resilience to socioeconomic and environmental disturbances through a set of indicators. We found that CBNRM strategies influence positively and negatively resilience and that internal decisions might address important threats. On the positive side, the social-ecological systems with longer tradition of CBNRM and more local buy-in of commonly agreed objectives appear to be more resilient to environmental challenges. But, internal governance factors such as power imbalances, poor income distribution, and gender inequities linked to CBNRM undermine resilience and foster out migration. Finally, communities appear to have limited capacities to cope with external disturbances such as global drivers of change or national policies that negatively affect their social-ecological resilience.