Assessment of zerovalent iron for stabilization of chromium, copper, and arsenic in soil

Stabilization of soil contaminated with trace elements is a remediation practice that does not reduce the total content of contaminants, but lowers the amounts of mobile and bioavailable fractions. This study evaluated the efficiency of Fe(0) to reduce the mobility and bioavailability of Cr, Cu, As and Zn in a chromated copper arsenate (CCA)-contaminated soil using chemical, biochemical and biotoxicity tests. Contaminated soil was stabilized with 1% iron grit. This treatment decreased As and Cr concentrations in leachates (by 98% and 45%, respectively), in soil pore water (by 99% and 94%, respectively) and in plant shoots (by 84% and 95%, respectively). The stabilization technique also restored most of analyzed soil enzyme activities and reduced microbial toxicity, as evaluated by the BioTox test. After stabilization, exchangeable and bioaccessible fractions of Cu remained high, causing some residual toxicity in the treated soil.     

The importance of outlier detection and training set selection for reliable environmental QSAR predictions

Empirical QSAR models are only valid in the domain they were trained and validated. Application of the model to substances outside the domain of the model can lead to grossly erroneous predictions. Partial least squares (PLS) regression provides tools for prediction diagnostics that can be used to decide whether or not a substance is within the model domain, i.e. if the model prediction can be trusted. QSAR models for four different environmental end-points are used to demonstrate the importance of appropriate training set selection and how the reliability of QSAR predictions can be increased by outlier diagnostics. All models showed consistent results; test set prediction errors were very similar in magnitude to training set estimation errors when prediction outlier diagnostics were used to detect and remove outliers in the prediction data. Test set prediction errors for substances classified as outliers were much larger. The difference in the number of outliers between models with a randomly and systematically selected training illustrates well the need of representative training data.     

Environmental impact assessment on the construction and operation of municipal solid waste sanitary landfills in developing countries: China case study

An inventory of material and energy consumption during the construction and operation (C&O) of a typical sanitary landfill site in China was calculated based on Chinese industrial standards for landfill management and design reports. The environmental impacts of landfill C&O were evaluated through life cycle assessment (LCA). The amounts of materials and energy used during this type of undertaking in China are comparable to those in developed countries, except that the consumption of concrete and asphalt is significantly higher in China. A comparison of the normalized impact potential between landfill C&O and the total landfilling technology implies that the contribution of C&O to overall landfill emissions is not negligible. The non-toxic impacts induced by C&O can be attributed mainly to the consumption of diesel used for daily operation, while the toxic impacts are primarily due to the use of mineral materials. To test the influences of different landfill C&O approaches on environmental impacts, six baseline alternatives were assessed through sensitivity analysis. If geomembranes and geonets were utilized to replace daily and intermediate soil covers and gravel drainage systems, respectively, the environmental burdens of C&O could be mitigated by between 2% and 27%. During the LCA of landfill C&O, the research scope or system boundary has to be declared when referring to material consumption values taken from the literature; for example, the misapplication of data could lead to an underestimation of diesel consumption by 60–80%.     

Effects of boreal forest management practices on the climate impact of CO2 emissions from bioenergy

In Life Cycle Assessment (LCA), carbon dioxide (CO₂) emissions from biomass combustion are traditionally assumed climate neutral if the bioenergy system is CO₂ flux neutral, i.e. the quantity of CO₂ released approximately equals the amount of CO₂ sequestered in biomass. This convention is a plausible assumption for fast growing biomass species, but is inappropriate for slower growing biomass, like forests. In this case, the climate impact from biomass combustion can be potentially underestimated if CO₂ emissions are ignored, or overestimated, if biogenic CO₂ is considered equal to anthropogenic CO₂. The estimation of the effective climate impact should take into account how the CO₂ fluxes are distributed over time: the emission of CO₂ from bioenergy approximately occurs at a single point in time, while the absorption by the new trees is spread over several decades. Our research target is to include this dynamic time dimension in unit-based impact analysis, using a boreal forest stand as case study. The boreal forest growth is modelled with an appropriate function, and is investigated under different forestry regimes (affecting the growth rate and the year of harvest). Specific atmospheric decay functions for biomass-derived CO₂ are then elaborated for selected combinations of forest management options. The contribution to global warming is finally quantified using the GWP_bio index as climate metric. Results estimates the effects of these practices on the characterization factor used for the global warming potential of CO₂ from bioenergy, and point out the key role played by the selected time horizon.     

Large variation in breast milk levels of organohalogenated compounds is dependent on mother's age, changes in body composition and exposures early in life

We identified factors that are important determinants of body burdens (breast milk levels) of polychlorinated biphenyls (PCBs), dioxins (polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs)) and polybrominated diphenyl ethers (PBDEs). PCBs, PCDD/Fs and PBDEs were analysed in breast milk from up to 325 first-time mothers in Uppsala, Sweden, who delivered between 1996 and 2006. Hierarchical clustering was used as a method for identification of groups of compounds with common sources of exposure and similar toxicokinetics. Based on correlations between levels of single compounds/congeners in breast milk, distinctly separated clusters were formed, strongly dependent on structural similarities of the organohalogen molecules. In a multiple regression model, levels of PCBs (except PCB 28), PCDD/Fs and BDE-153 were positively associated with age of the mother and weight loss after delivery and inversely associated with pre-pregnancy BMI (body mass index) and weight gain during pregnancy. Higher levels of mono-ortho PCB TEQ, non-ortho PCB TEQ and BDE-153 in milk were found among women with high physical activity. Women who were breastfed during infancy and grew up on the Baltic coast of Sweden, with high availability of contaminated fish from the Baltic sea, had higher levels of PCBs and PCDD/Fs in breast milk indicating that exposure early in life from breast milk and contaminated fish may still affect body burdens at the time of pregnancy. The importance of current consumption of fatty Baltic fish as a source of exposure was supported by the positive association with breast milk levels of mono-ortho PCB TEQ, PCDF TEQ and BDE-153. The results show that, in contrast to the lower brominated PBDE congeners, the hexa-brominated BDE-153 resembles the chlorinated compounds with regards to determinants in breast milk. This suggests that some of the PBDEs may have toxicokinetic properties and that are similar to the PCBs and PCDD/Fs. Our results show that a few simple advices to women regarding weight changes in connection with pregnancy and consumption of contaminated fatty fish during the whole lifetime may lower the levels of dioxins in breast milk by up to 60%.     

Stability of odorants from pig production in sampling bags for olfactometry

Odor from pig production facilities is typically measured with olfactometry, whereby odor samples are collected in sampling bags and assessed by human panelists within 30 h. In the present study, the storage stability of odorants in two types of sampling bags that are often used for olfactometry was investigated. The bags were made of Tedlar or Nalophan. In a field experiment, humid and dried air samples were collected from a pig production facility with growing-finishing pigs and analyzed with a gas chromatograph with an amperometric sulfur detector at 4, 8, 12, 28, 52, and 76 h after sampling. In a laboratory experiment, the bags were filled with a humid gas mixture containing carboxylic acids, phenols, indoles, and sulfur compounds and analyzed with proton-transfer-reaction mass spectrometry after 0, 4, 8, 12, and 24 h. The results demonstrated that the concentrations of carboxylic acids, phenols, and indoles decreased by 50 to >99% during the 24 h of storage in Tedlar and Nalophan bags. The concentration of hydrogen sulfide decreased by approximately 30% during the 24 h of storage in Nalophan bags, whereas in Tedlar bags the concentration of sulfur compounds decreased by <5%. In conclusion, the concentrations of odorants in air samples from pig production facilities significantly decrease during storage in Tedlar and Nalophan bags, and the composition changes toward a higher relative presence of sulfur compounds. This can result in underestimation of odor emissions from pig production facilities and of the effect of odor reduction technologies.     

Pay as you throw: Strengths and weaknesses of weight-based billing in household waste collection systems in Sweden

Householders’ response to weight-based billing for the collection of household waste was investigated with the aim of providing decision support for waste management policies. Three questions were addressed: How much and what kind of information on weight-based billing is discernible in generic Swedish waste collection statistics? Why do local authorities implement weight-based billing, and how do they perceive the results? and, Which strengths and weaknesses of weight-based billing have been observed on the local level? The study showed that municipalities with pay-by-weight schemes collected 20% less household waste per capita than other municipalities. Surprisingly, no part of this difference could be explained by higher recycling rates. Nevertheless, the majority of waste management professionals were convinced that recycling had increased as a result of the billing system. A number of contradicting strengths and weaknesses of weight-based billing were revealed.     

A Heat Dynamic Model for Intelligent Heating of Buildings

This article presents a heat dynamic model for prediction of the indoor temperature in an office building. The model has been used in several flexible load applications, where the indoor temperature is allowed to vary around a given reference to provide power system services by shifting the heating of the building in time. This way the thermal mass of the building can be used to absorb energy from renewable energy source when available and postpone heating in periods with lack of renewable energy generation. The model is used in a model predictive controller to ensure the residential comfort over a given prediction horizon.