Engaging with the Ecological Footprint as a Decision-Making Tool: Process and Responses

Since the initial development of the Ecological Footprint in the early 1990s, the concept has gained increased interest amongst academics and practitioners internationally. In the UK, it is estimated that some 60 to 70 Ecological Footprint studies were undertaken between 1999 and 2004. Although the majority of interest in Ecological Footprinting has come from local government, a recent study has found that government officers involved in the formulation of council policy have not been able to engage with the Ecological Footprint as a process or use the results to inform policy decisions. This paper analyses how an Ecological Footprint has been developed for Cardiff, the capital city of Wales. The approach used to construct an Ecological Footprint for Cardiff has been significantly different to that which had been used previously in the UK, as it has involved a unique consortium of researchers at Cardiff University and policy development officers at Cardiff Council checking the quality of data used in the Footprint calculation, and developing a range of policy scenarios.     

Status of Marine Mammals in the United States

Abstract: The 1994 amendments to the U.S. Marine Mammal Protection Act required, for the first time, an assessment of the status of every marine mammal stock in the United States. We draw conclusions about the status of marine mammals from assessments of 153 stocks conducted to meet the requirements of these amendments. We found important regional differences in the status of stocks. Most stocks in the Atlantic and Pacific experience human-induced mortality (takes), primarily from gill-net fisheries. The proportion of stocks with takes was lower in the Gulf of Mexico and Hawaii, areas with few gill-net fisheries. Estimated takes exceeded removal limits for 29% of stocks in the Atlantic, 14% in the Pacific, 8% in Alaska, 7% in the Gulf of Mexico, and 0% in Hawaii. Twenty-eight stocks are listed as threatened or endangered under the U.S. Endangered Species Act. Most, but not all, baleen whale stocks are recovering after cessation of commercial harvests. Many species of pelagic cetaceans, including beaked and sperm whales, are vulnerable to mortality in pelagic drift-net fisheries. Most pinniped stocks experience takes, but none of these takes exceeds removal limits, and all pinniped stocks on mainland coasts of the United States are increasing in abundance. Quantitative data on trends in abundance are available for few cetacean stocks, emphasizing the difficulty of monitoring trends in these species. These stock assessments have greatly advanced our understanding of the status of marine mammals in the United States, but information gaps remain, particularly regarding stock structure and possible mortality in unmonitored fisheries.     

Book reviews

Sustainable Cities and Sustainable Development Sustainable Cities. G. Haughton & C. Hunter, 1994, Jessica Kingsley/Regional Studies Association, London

Sustainable Cities in Europe. P. Nijkamp & A. Perrels, 1994, Earthscan, London ISBN 185383, £12.95

Toward Sustainable Development Concepts, Methods and Policy. J. C. J. M. van den Bergh & J. van der Straaten, 1994, Island Press, Washington, DC, ISBN 1 55963 3492, £30.00

Just Environments: intergenerational, international and interspecies issues. David E. Cooper & Joy A. Palmer (Eds), 1995, London, Routledge, ISBN 0 415-10336-3, pp. 199, index, £11.99

First Steps: Local Agenda 21 in practice. Stella Whittaker (Ed.), 1995, London, HMSO, 251 pp. ISBN 0 11 701871 6, £29.95

Beyond the Car: essays on the auto culture. Sue Zielinski & Gordon Laird (Eds), 1995, Toronto, Steel Rail Publishing/Transportation Options, 191 pp. ISBN 0 88791 042 4, pbk, C$ 19.95, US$15.95     

Synthesis and characterisation of potassium polytitanate for photocatalytic degradation of crystal violet

Potassium titanate nanostructures were synthesised by hydrothermal treatment of TiO2 （P25） in KOH and H2O2. As-produced powders were characterised by scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy, X-ray diffraction, and nitrogen adsorption-desorption methods. Longitudinally-oriented-wire-like structures with a length up to several micrometres and diameters ranging from 10 to 30 nm were obtained. Larger size fibrous nanowires resulting from the hydrotherrnal treatment showed high affinity in adsorbing crystal violet （CV）, which was mainly due to their high surface area. The photocatalytic bleaching of CV solution revealed that the wires are photoactive under ultraviolet light irradiation. Macroporous nanowires are considered as effective adsorbents of CV, capable of photocatalvtic degradation, and they can be easily separated from the solution by settling.     

Management walk-arounds: Lessons from the Gulf of Mexico oil well blowout

Many companies understand that good management requires senior managers to spend time with front line workers. Some companies build into performance agreements for senior managers a requirement that they conduct a certain number of such site visits each year. The challenge is to make productive use of these visits. Safety is often a focus for visiting VIPs, but too often safety is understood to be a matter of “slips, trips and falls”, rather than the major hazards that can blow the plant or the rig apart. This paper will examine a VIP visit made to the Deepwater Horizon rig by senior managers from BP and from the rig owner, Transocean, just hours before the explosion. It will argue that, despite their best of intentions, these managers fell into the trap identified above. The paper looks at things that senior managers can do to focus attention on the most significant hazards.     

Principles for retrofitting coal burners for oxy-combustion

Experiments were performed in a 1.5 MW pilot-scale furnace to investigate the differences between air- and oxy-fired flame behavior from a pulverized coal oxy-research burner designed for flexible operating conditions. The flame behavior was characterized by recording video images of the flames and by measuring radiation intensity along the flame length. Various strategies relating air- and oxy-fired operation of the burner primary register were investigated where the oxy-fired burner primary mass, momentum and velocity were matched to the air-fired conditions. Matching either burner primary mass or momentum under oxy-fired conditions with air-fired conditions resulted in a flame stabilized within the quarl. Matching primary velocity with air-fired conditions resulted in a detached flame indicating a delay in flame ignition for the oxyfired conditions. A decrease in primary velocity of 13% was necessary in order to stabilize a flame within the quarl similar to the air-fired case. Additional experiments also showed a flame could be stabilized with no oxygen enrichment of the primary (～3 vol.%, dry O₂ in the primary). Experiments where oxygen was injected at the burner face indicated injection at the boundary of the primary and secondary flow paths strongly attach a flame and injection at the coal rich primary flow path increased the radiative intensity of the flame.     

Differential Individual Particle Analysis (DIPA): applications in particulate matter characterization

Operator-controlled and computer-controlled scanning electron microscopy (CCSEM) are used extensively to characterize particulate matter in environmental media. Analysis in a scanning electron microscope (SEM) coupled with chemical extraction is a potentially powerful tool that is capable of determining how various sample components are associated at the individual particle level. This involves initial characterization in a SEM, after which the material is exposed to a liquid or gas phase reaction for a specified time, and once exposure is concluded, the particles are reanalyzed in the SEM. This particle analysis by difference, or differential individual particle analysis (DIPA), possesses considerable potential for describing the behavior of environmental particles under changing chemical conditions. Here we describe DIPA applications with illustrative examples drawn from the analysis of particulate matter modified by reactions in a fluid environment. In situ DIPA permits the same particles to be analyzed in the SEM before and after modification. Repeated exposure to the same, or different modifying conditions, provides information on the time dependence of specific reactions. Significant numbers of particles can be analyzed using CCSEM, and the same particles can be analyzed after the reaction by accurate sample relocation in the SEM. Ex situ DIPA, which involves a bulk sample modification, uses CCSEM to characterize significant numbers of particles pre- and postreaction. The CCSEM approach is extremely efficient; recent developments in silicon drift detectors have increased the speed of characteristic X-rays detection, and very large numbers of particles can be analyzed in a short period of time.     

Connectivity for conservation: a framework to classify network measures

Graph theory, network theory, and circuit theory are increasingly being used to quantify multiple aspects of habitat connectivity and protected areas. There has been an explosive proliferation of network (connectivity) measures, resulting in over 60 measures for ecologists to now choose from. Conceptual clarification on the ecological meaning of these network measures and their interrelationships is overdue. We present a framework that categorizes network measures based on the connectivity property that they quantify (i.e., route-specific flux, route redundancy, route vulnerability, and connected habitat area) and the structural level of the habitat network to which they apply. The framework reveals a lack of network measures in the categories of "route-specific flux among neighboring habitat patches" and "route redundancy at the level of network components." We propose that network motif and path redundancy measures can be developed to fill the gaps in these categories. The value of this framework lies in its ability to inform the selection and application of network measures. Ultimately, it will allow a better comparison among graph, network, and circuit analyses, which will improve the design and management of connected landscapes.