Enhanced transfer of arsenic to grain for Bangladesh grown rice compared to US and EU

A field survey was conducted in arsenic impacted and non-impacted paddies of Bangladesh to assess how arsenic levels in rice (Oryza sativa L.) grain are related to soil and shoot concentrations. Ten field sites from an arsenic contaminated tubewell irrigation region (Faridpur) were compared to 10 field sites from a non-affected region (Gazipur). Analysis of the overall data set found that both grain and shoot total arsenic concentrations were highly correlated (P<0.001) with soil arsenic. Median arsenic concentrations varied by 14, 10 and 3 fold for soil, shoot and grain respectively comparing the two regions. The reason for the sharp decline in the magnitude of difference between Gazipur and Faridpur for grain arsenic was due to an exponential decline in the grain/shoot arsenic concentration ratio with increasing shoot arsenic concentration. When the Bangladesh data were compared to EU and US soil-shoot-grain transfers, the same generic pattern could be found with the exception that arsenic was more efficiently transferred to grain from soil/shoot in the Bangladesh grown plants. This may reflect climatic or cultivar differences.     

Comparative study of measured and modelled number concentrations of nanoparticles in an urban street canyon

This study presents a comparison between measured and modelled particle number concentrations (PNCs) in the 10–300 nm size range at different heights in a canyon. The PNCs were modelled using a simple modelling approach (modified Box model, including vertical variation), an Operational Street Pollution Model (OSPM) and Computational Fluid Dynamics (CFD) code FLUENT. All models disregarded any particle dynamics. CFD simulations have been carried out in a simplified geometry of the selected street canyon. Four different sizes of emission sources have been used in the CFD simulations to assess the effect of source size on mean PNC distributions in the street canyon. The measured PNCs were between a factor of two and three of those from the three models, suggesting that if the model inputs are chosen carefully, even a simplified approach can predict the PNCs as well as more complex models. CFD simulations showed that selection of the source size was critical to determine PNC distributions. A source size scaling the vehicle dimensions was found to better represent the measured PNC profiles in the lowest part of the canyon. The OSPM and Box model produced similar shapes of PNC profile across the entire height of the canyon, showing a well-mixed region up to first ≈2 m and then decreasing PNCs with increased height. The CFD profiles do correctly reproduce the increase from road level to a height of ≈2 m; however, they do not predict the measured PNC decrease higher in the canyon. The PNC differences were largest between idealised (CFD and Box) and operational (OSPM) models at upper sampling heights; these were attributed to weaker exchange of air between street and roof-above in the upper part of the canyon in the CFD calculations. Possible reasons for these discrepancies are given.     

Associations between forest characteristics and socio-economic development: a case study from Portugal

The integration of socio-economic and environmental objectives is a major challenge in developing strategies for sustainable landscapes. We investigated associations between socio-economic variables, landscape metrics and measures of forest condition in the context of Portugal. The main goals of the study were to 1) investigate relationships between forest conditions and measures of socio-economic development at national and regional scales, 2) test the hypothesis that a systematic variation in forest landscape metrics occurs according to the stage of socio-economic development and, 3) assess the extent to which landscape metrics can inform strategies to enhance forest sustainability. A ranking approach and statistical techniques such as Principal Component Analysis were used to achieve these objectives. Relationships between socio-economic characteristics, landscape metrics and measures of forest condition were only significant in the regional analysis of municipalities in Northern Portugal. Landscape metrics for different tree species displayed significant variations across socio-economic groups of municipalities and these differences were consistent with changes in characteristics suggested by the forest transition model. The use of metrics also helped inform place-specific strategies to improve forest management, though it was also apparent that further work was required to better incorporate differences in forest functions into sustainability planning.     

Bayesian treatment of a chemical mass balance receptor model with multiplicative error structure

The chemical mass balance (CMB) receptor model is commonly used in source apportionment studies as a means for attributing measured airborne particulate matter (PM) to its constituent emission sources. Traditionally, error terms (e.g., measurement and source profile uncertainty) associated with the model have been treated in an additive sense. In this work, however, arguments are made for the assumption of multiplicative errors, and the effects of this assumption are realized in a Bayesian probabilistic formulation which incorporates a ‘modified’ receptor model. One practical, beneficial effect of the multiplicative error assumption is that it automatically precludes the possibility of negative source contributions, without requiring additional constraints on the problem. The present Bayesian treatment further differs from traditional approaches in that the source profiles are inferred alongside the source contributions. Existing knowledge regarding the source profiles is incorporated as prior information to be updated through the Bayesian inferential scheme. Hundreds of parameters are therefore present in the expression for the joint probability of the source contributions and profiles (the posterior probability density function, or PDF), whose domain is explored efficiently using the Hamiltonian Markov chain Monte Carlo method. The overall methodology is evaluated and results compared to the US Environmental Protection Agency's standard CMB model using a test case based on PM data from Fresno, California.     

Apportioning black carbon to sources using highly time-resolved ambient measurements of organic molecular markers in Pittsburgh

We present highly time-resolved measurements of organic molecular markers in downtown Pittsburgh, which are used to investigate sources contributing to atmospheric aerosols in the area. Two-hour average concentrations of condensed-phase and semivolatile organic species were measured using a Thermal Desorption Aerosol GC/MS (TAG). Concentrations for mobile source markers like hopanes had regular diurnal and day-of-week patterns. Pairing high time-resolved measurements with meteorological data helped identify contributions from known point sources for markers correlated with wind direction. Black carbon (BC), volatile organic compounds (VOCs) and organic molecular markers were apportioned to sources using the Chemical Mass Balance (CMB) and Positive Matrix Factorization (PMF) receptor models. Diesel and gasoline mobile source factors were identified as the main sources of BC in the downtown Pittsburgh area, contributing 67% and 20% of the study-average BC. 13% of the BC was associated with a source factor tentatively identified as an industrial or regional source. The high time resolution of the TAG has the potential to provide important new insight into source apportionment efforts using organic molecular marker measurements.     

Molecular identification and nanoremediation of microbial contaminants in algal systems using untreated wastewater

Wastewater-algal biomass is a promising option to biofuel production. However, microbial contaminants constitute a substantial barrier to algal biofuel yield. A series of algal strains, Nannochloris oculata and Chlorella vulgaris samples (n = 30), were purchased from the University of Texas, and were used for both stock flask cultures and flat-panel vertical bioreactors. A number of media were used for isolation and differentiation of potential contaminants according to laboratory standards (CLSI). Conventional PCR amplification was performed followed by 16S rDNA sequencing to identify isolates at the species level. Nanotherapeutics involving a nanomicellar combination of natural chitosan and zinc oxide (CZNPs) were tested against the microbial lytic groups through Minimum Inhibitory Concentration (MIC) tests and Transmission Electronic Microscopy (TEM). Results indicated the presence of Pseudomonas spp., Bacillus pumilus/ safensis, Cellulosimicrobium cellulans, Micrococcus luteus and Staphylococcus epidermidis strains at a substantial level in the wastewater-fed algal reactors. TEM confirmed the effectiveness of CZNPs on the lytic group while the average MICs (mg/mL) detected for the strains, Pseudomonas spp, Micrococcus luteus, and Bacillus pumilus were 0.417, 3.33, and 1.458, respectively. Conclusively, CZNP antimicrobials proved to be effective as inhibitory agents against currently identified lytic microbial group, did not impact algae cells, and shows promise for in situ interventions.     

Macro,Meso, and Micro‐Efficiencies in Water Resources Management: A New Framework Using Water Balance1

Haie, Naim and Andrew A. Keller, 2012. Macro, Meso, and Micro‐Efficiencies in Water Resources Management: A New Framework Using Water Balance. Journal of the American Water Resources Association (JAWRA) 48(2): 235‐243. DOI: 10.1111/j.1752‐1688.2011.00611.x Abstract: One of the most important performance indicators for water resources systems (WRSs) management is efficiency. Here, water balance, based on mass conservation, is utilized to systemically develop three levels of composite efficiency indicators for a WRS, which are configurable based on two types of water totals: total inflow and total consumption (outflow that effectively is not available for reuse). The indices characterize hydrology of an area by including in their formulations the flow dynamics at three integrated levels. Furthermore, the usefulness of water is incorporated into the indicators by defining two weights: one for quality, and the other for beneficial attributes of water use. Usefulness Criterion is the product of quality and beneficial weights, emphasizing the equal significance of the two dimensions. Both of these weights depend on the system itself and the priorities of the supervising organization, which also are shaped by the objectives and values of the given society. These concepts lead to the definition of Macro, Meso, and Micro‐Efficiencies, which form a set of integrated indicators that explicitly promotes stakeholder involvement in evaluation and design of WRSs. Macro, Meso, and Micro‐Efficiencies should be maximized for both water totals, which is an integrated prerequisite for sustainability and is less promoted by competing stakeholders. To demonstrate this new framework, it is applied to published data for urban and agricultural cases and some results are explained.     

Concentrations and bioaccessibilities of metals in exterior urban paints

Paint fragments have been collected from a variety of structures (e.g. walls, lamp posts, doors, railings) from the urban environment of Plymouth, UK, and concentrations of metals determined following acid digestion. Concentrations of most metals were highly variable and spanned several orders of magnitude among the samples (e.g. Pb = 4.5 to 36 900 μg g⁻¹; Cr = 1.9 to 775 μg g⁻¹; Zn = 39 to 23 500 μg g⁻¹). The bioaccessibilities of the metals were evaluated using a physiologically based extraction test that simulates the chemical conditions of the human stomach and intestine. The bioaccessibility of a given metal was highly variable among the samples and was greater in the stomach than the intestine in some cases (e.g. Cd, Pb) and greater in the intestine in others (e.g. Co, Cr). Based on total and bioaccessible concentrations in urban paints, Pb remains the metal of greatest concern from a human health perspective.     

Adsorption of trace metals to plastic resin pellets in the marine environment

Plastic production pellets collected from beaches of south west England contain variable concentrations of trace metals (Cr, Co, Ni, Cu, Zn, Cd and Pb) that, in some cases, exceed concentrations reported for local estuarine sediments. The rates and mechanisms by which metals associate with virgin and beached polyethylene pellets were studied by adding a cocktail of 5 μg L(-1) of trace metals to 10 g L(-1) pellet suspensions in filtered seawater. Kinetic profiles were modelled using a pseudo-first-order equation and yielded response times of less than about 100 h and equilibrium partition coefficients of up to about 225 ml g(-1) that were consistently higher for beached pellets than virgin pellets. Adsorption isotherms conformed to both the Langmuir and Freundlich equations and adsorption capacities were greater for beached pellets than for virgin pellets. Results suggest that plastics may represent an important vehicle for the transport of metals in the marine environment.     

Livelihood adaptations to climate variability: insights from farming households in Ghana

Climate variability poses a significant threat to many sectors of Sub-Saharan Africa’s economy. Agriculture is one of the most climate sensitive sectors because of its dependence on rain-fed cultivation. This paper identifies the main adaptation strategies used by farming households in the Sudan savannah and forest-savannah transitional agro-ecological zones of Ghana, in order to reduce the adverse impacts of climate variability on their livelihood activities. It combines questionnaire surveys, key informant interviews and a range of participatory methods. Results show that households employ a range of on- and off-farm adaptation strategies including changing the timing of planting, planting early maturing varieties, diversification of crops, support from family and friends, and changing their diets to manage climate variability. Results reveal that most households use adaptation strategies linked to livelihood diversification to adapt to the increased climate variability seen in recent decades. Most households now engage in multiple non-arable farming livelihood activities in an attempt to avoid destitution because of crop failure linked to climate variability (particularly drought). The findings suggest that policy makers need to formulate more targeted climate adaptation policies and programmes that are linked to enhancing livelihood diversification, as well as establishing communication routes for farming communities to better share their knowledge on successful local climate adaptation strategies.