THE LAW OF THE COLORADO RIVER: COPING WITH SEVERE SUSTAINED DROUGHT1

ABSTRACT: The waters of the Colorado River are divided among seven states according to a complex ‘Law of the River’ drawn from interstate compacts, international treaties, statutes, and regulations. The Law of the River creates certain priorities among the states and the Republic of Mexico, and in the event of a severe sustained drought, the Law of the River dictates the distribution of water and operation of the elaborate reservoir system. Earlier work indicated that there is remarkable resilience in the system for established uses of water in the Lower Basin of the Colorado River. This work shows, based on an application of the Law of the River using computer modeling of operations of facilities on the Colorado River, that there may be serious environmental consequences and related legal restraints on how the water is used in times of shortage and that the existing legal and institutional framework governing the Colorado River does not adequately address all the issues that would be raised in a severe sustained drought. Several possible legal options for dealing with drought in the context of the Law of the River are identified.     

NETWORK AND SUBWATERSHED PARAMETERS EXTRACTED FROM DIGITAL ELEVATION MODELS: THE BILLS CREEK EXPERIENCE1

ABSTRACT: An automated extraction of channel network and sub-watershed characteristics from digital elevation models (DEM) is performed by model DEDNM. This model can process DEM data of limited vertical resolution representing low relief terrain. Such representations often include ill-defined drainage boundaries and indeterminate flow paths. The application watershed is an 84 km² low relief watershed in southwestern Oklahoma. The standard for validation is the network and subwatershed parameters defined by the blue line method on USGS 7.5–minute topographic maps. Evaluation of the generated and validation networks by visual comparisons shows a high degree of correlation. Comparison of selected network parameters (channel length, slope, drainage density, etc.) and of drainage network composition (bifurcation, length, slope, and area ratios) shows that, on the average, the generated parameters are within 5 percent of those derived from the validation network. The largest discrepancies were found for the channel slope values. The results of this application demonstrate that DEDNM effectively addresses network definition problems often encountered in low relief terrain and that it can generate accurate network and subwatershed parameters under those conditions.     

Anheuser-busch's a pledge and a promise: Total employee involvement

Anheuser-Busch is a large, diversified corporation, both in its products and in its environmental efforts. It is well-known that Anheuser-Busch is the world'S largest brewer, with twelve operating breweries and a thirteenth under construction. It also operates the largest aluminum can recycling network in the world, Anheuser-Busch Recycling (A-BR). A-BR recycled more than 600 million pounds of aluminum in 1991, or more than 17 billion cans. This article describes how Anheuser-Busch has put TQEM ideas into practice involving all of its employees.     

Observed LATCH use and misuse characteristics of child restraint systems in seven states

INTRODUCTION: Although the LATCH System (Lower Anchors and Tethers for Children) holds the promise of simplifying the installation of a child restraint system (CRS) to the vehicle's seat, many drivers transporting young children have difficulties using this technology. This paper reports on an observation study of LATCH use and misuse. METHOD: Observations of approximately 1,000 children less than 5 years of age in CRSs, in the back seats of vehicles that were equipped with tether and lower anchors, in seven states. RESULTS: Tethers were used for 51% of the children when the forward-facing CRS had tether straps and the vehicle had tether anchors. Lower anchors were used for 58% of the children when the CRS had lower attachments and the vehicle had lower anchors. The most common tether and lower attachment misuses were loose tether straps (18% of cases) and loose lower attachment installation (30% of the cases), respectively. Vehicle safety belts were used in combination with lower attachments in 20% of all lower anchor installations. CONCLUSION: As more caregivers of young children drive vehicles equipped with LATCH, it will be important to promote the proper installation of CRSs using this technology. LATCH education messages must also emphasize that the lower anchors may not always be the safest choice for CRS attachment -- the safest attachment is the one that results in a tight fit and will be used correctly consistently.     

Blends of (R)-3-hydroxyhexan-2-one and alkan-2-ones identified as potential pheromones produced by three species of cerambycid beetles

We present data indicating that three species of cerambycid beetles (subfamily Cerambycinae) produce the common cerambycine pheromone component (R)-3-hydroxyhexan-2-one as well as an alkan-2-one component, a possible new motif for cerambycid pheromone components. GC/MS analyses of headspace volatiles produced by male beetles indicated that Cyrtophorus verrucosus (Olivier) produced (R)-3-hydroxyhexan-2-one but also nonan-2-one at ~18 % of the hydroxyketone component, whereas Orwellion gibbulum arizonense (Casey) and Parelaphidion aspersum (Haldeman) produced decan-2-one at ~40 and 7 % of the amount of the hydroxyketone, respectively. In field bioassays, adult C. verrucosus were attracted by (R)-3-hydroxyhexan-2-one alone, but attraction was significantly enhanced by nonan-2-one. This effect was lost if the quantity of nonan-2-one exceeded 100 % of the hydroxyketone, suggesting that beetles could discern ratios of the two chemicals and were most strongly attracted to those approximating the blend produced by males. We suggest that nonan-2-one plays a role in the species specificity of the pheromone signal of C. verrucosus, and that decan-2-one plays a similar role in the semiochemical communication of O. g. arizonense and P. aspersum.     

Laboratory investigation of three distinct emissions monitors for hydrochloric acid

The measurement of hydrochloric acid (HCl) on a continuous basis in coal-fired plants is expected to become more important if HCl standards become implemented as part of the Federal Mercury and Air Toxics Standards (MATS) standards that are under consideration. For this study, the operational performance of three methods/instruments, including tunable diode laser absorption spectroscopy (TDLAS), cavity ring down spectroscopy (CRDS), and Fourier transform infrared (FTIR) spectroscopy, were evaluated over a range of real-world operating environments. Evaluations were done over an HCl concentration range of 0–25 ppmv and temperatures of 25, 100, and 185 °C. The average differences with respect to temperature were 3.0% for the TDL for values over 2.0 ppmv and 6.9% of all concentrations, 3.3% for the CRDS, and 4.5% for the FTIR. Interference tests for H₂O, SO₂, and CO, CO₂, and NO for a range of concentrations typical of flue gases from coal-fired power plants did not show any strong interferences. The possible exception was an interference from H₂O with the FTIR. The instrument average precision over the entire range was 4.4% for the TDL with better precision seen for concentrations levels of 2.0 ppmv and above, 2.5% for the CRDS, and 3.5% for the FTIR. The minimum detection limits were all on the order of 0.25 ppmv, or less, utilizing the TDL values with a 5-m path. Zero drift was found to be 1.48% for the TDL, 0.88% for the CRDS, and 1.28% for the FTIR.

Implications: This study provides an evaluation of the operational performance of three methods/instruments, including TDL absorption spectroscopy (TDLAS), cavity ring down spectroscopy (CRDS), and FTIR spectroscopy, for the measurement of hydrochloric acid (HCl) over a range of real-world operating environments. The results showed good instrument accuracy as a function of temperature and no strong interferences for flue gases typical to coal-fired power plants. The results show that these instruments would be viable for the measurement of HCl in coal-fired plants if HCl standards become implemented as part of the Federal Mercury and Air Toxics Standards (MATS) standards that are under consideration.     

A context-intensive approach to imputation of missing values in data sets from networks of environmental monitors

Although networks of environmental monitors are constantly improving through advances in technology and management, instances of missing data still occur. Many methods of imputing values for missing data are available, but they are often difficult to use or produce unsatisfactory results. I-Bot (short for “Imputation Robot”) is a context-intensive approach to the imputation of missing data in data sets from networks of environmental monitors. I-Bot is easy to use and routinely produces imputed values that are highly reliable. I-Bot is described and demonstrated using more than 10 years of California data for daily maximum 8-hr ozone, 24-hr PM_2.5 (particulate matter with an aerodynamic diameter <2.5 μm), mid-day average surface temperature, and mid-day average wind speed. I-Bot performance is evaluated by imputing values for observed data as if they were missing, and then comparing the imputed values with the observed values. In many cases, I-Bot is able to impute values for long periods with missing data, such as a week, a month, a year, or even longer. Qualitative visual methods and standard quantitative metrics demonstrate the effectiveness of the I-Bot methodology.Implications: Many resources are expended every year to analyze and interpret data sets from networks of environmental monitors. A large fraction of those resources is used to cope with difficulties due to the presence of missing data. The I-Bot method of imputing values for such missing data may help convert incomplete data sets into virtually complete data sets that facilitate the analysis and reliable interpretation of vital environmental data.     

The evolution of large and small-scale structures in Kelvin–Helmholtz instabilities

To better understand the dynamics of Kelvin–Helmholtz instabilities in environmental flows, their evolution is investigated using direct numerical simulations (DNS). Two-dimensional DNS is used to examine the large-scale and small-scale structures of the instability at high Reynolds and Prandtl numbers that represent real environmental flows. The semi-analytical model of Corcos and Sherman (J Fluid Mech 73:241–264, 1976) is used to explain the physics of these simulations prior to saturation of the KH billow, and also provide a computationally efficient prediction of the vortex dynamics of the instability. The DNS results show that the large-scale structure of the billow does not depend on the Reynolds number for sufficiently high Reynolds numbers. The billow structure reveals a less straightforward dependence on the Prandtl number. Predictions of the model of Corcos and Sherman (J Fluid Mech 73:241–264, 1976) improve as Reynolds number and Prandtl number increase. The small-scale structure of the vorticity and density fields vary with both Reynolds and Prandtl numbers. Three-dimensional DNS of KH flows and their transition to turbulence are used to study small length scales. Based on the thickness of the braid, a simple method is introduced to estimate the Batchelor scale, which can be used as a guide for the resolution required for the direct numerical simulation of two and three-dimensional Kelvin–Helmholtz flow fields.