“Impressive?” Credentials,family photographs,and the perception of therapist qualities

The impact of the number of displayed credentials (0, 2, 4, or 9) and the presence or absence of family photographs on participants' judgments of a therapist's qualities was assessed. In a between-participants design, 227 participants made these judgments after viewing a projected digital image of a therapist's office. The judgments of the characteristics yielded three factors, Qualifications, Friendliness, and Energy. Analyses indicated that in general, the greater the number of credentials, the more positive the judgment of the therapist's Qualifications and Energy. The presence of family pictures had no significant impact on judgments. Results are discussed in terms of recommendations for the counseling environment.     

Gaseous ammonia uptake in compost biofilters as related to compost water content

Sewage sludge and yard waste compost were used as biofilter materials and tested with respect to their capacity for removing ammonia from air at different water contents. Ammonia removal was measured in biofilters containing compost wetted to different moisture contents ranging from air dry to field capacity (maximum water holding capacity). Filters were operated for 15 days and subsequently analyzed for NH3/NH4+, NO2-, and NO3-. The measured nitrogen species concentration profiles inside the filters were used to calculate ammonia removal rates. The results showed that ammonia removal is strongly dependent on the water content in the filter material. At gravimetric water contents below 0.25 g H2O g solids(-1) for the yard waste compost and 0.5 g H2O g solids(-1) ammonia removal rates were very low but increased rapidly above these values. The sewage sludge compost filters yielded more than twice the ammonia removal rate observed for yard waste compost likely because of a high initial concentration of nitrifying bacteria originating from the wastewater treatment process and a high airwater interphase surface area that facilitates effective ammonia dissolution and transport to the biofilm.     

Application of multiple-population viability analysis to evaluate species recovery alternatives

Population viability analysis (PVA) is a powerful conservation tool, but it remains impractical for many species, particularly species with multiple, broadly distributed populations for which collecting suitable data can be challenging. A recently developed method of multiple-population viability analysis (MPVA), however, addresses many limitations of traditional PVA. We built on previous development of MPVA for Lahontan cutthroat trout (LCT) (Oncorhynchus clarkii henshawi), a species listed under the U.S. Endangered Species Act, that is distributed broadly across habitat fragments in the Great Basin (U.S.A.). We simulated potential management scenarios and assessed their effects on population sizes and extinction risks in 211 streams, where LCT exist or may be reintroduced. Conservation populations (those managed for recovery) tended to have lower extinction risks than nonconservation populations (mean = 19.8% vs. 52.7%), but not always. Active management or reprioritization may be warranted in some cases. Eliminating non-native trout had a strong positive effect on overall carrying capacities for LCT populations but often did not translate into lower extinction risks unless simulations also reduced associated stochasticity (to the mean for populations without non-native trout). Sixty fish or 5–10 fish/km was the minimum reintroduction number and density, respectively, that provided near-maximum reintroduction success. This modeling framework provided crucial insights and empirical justification for conservation planning and specific adaptive management actions for this threatened species. More broadly, MPVA is applicable to a wide range of species exhibiting geographic rarity and limited availability of abundance data and greatly extends the potential use of empirical PVA for conservation assessment and planning.     

Mobilisation capacity for agri-environmental management

The integration of environmental concerns into agricultural policies - through agri-environment measures (AEM) - has seen a fast development across Europe. This paper conceives AEM as an evolving instrument, a product that takes shape, gets diffused and taken up in, by and through networks of relations. Success then depends on the mobilisation or active participation of all those who may support and develop it. Using the examples of the Flanders' and Walloon regions of Belgium, the paper sets out to examine the mechanisms by which mobilisation for agri-environmental management develops, and by doing so, to gain a better understanding of mobilisation capacity as a concept to be used for evaluating policy implementation in this area. The study follows AEM along the various trajectories of implementation (design, distribution, application). The findings reveal how mobilisation capacity is gradually built-up by the interplay between AEM and the networks it connects to. The case illustrates well how such interactions occur all the way from administration offices to farmers' fields, and that their nature can be very different (e.g., formal and informal, durable and short-lived, expected and unexpected). It is concluded that in evaluating actor-networks, one should look at them in an open and fluid manner, that is, not to privilege any particular configuration or form of attachment over the other, not take intentions and objectives as a starting point but instead address the opportunities for synergies, and be aware that any network built around the instrument may change its content and the way it functions.     

Mercury trends in fish from rivers and lakes in the United States, 1969�C2005

A national dataset on concentrations of mercury in fish, compiled mainly from state and federal monitoring programs, was used to evaluate trends in mercury (Hg) in fish from US rivers and lakes. Trends were analyzed on data aggregated by site and by state, using samples of the same fish species and tissue type, and using fish of similar lengths. Site-based trends were evaluated from 1969 to 2005, but focused on a subset of the data from 1969 to 1987. Data aggregated by state were used to evaluate trends in fish Hg concentrations from 1988 to 2005. In addition, the most recent Hg fish data (1996?C2005) were compared to wet Hg deposition data from the Mercury Deposition Network (MDN) over the same period. Downward trends in Hg concentrations in fish from data collected during 1969?C1987 exceeded upward trends by a ratio of 6 to 1. Declining Hg accumulation rates in sediment and peat cores reported by many studies during the 1970s and 1980s correspond with the period when the most downward trends in fish Hg concentrations occurred. Downward Hg trends in both sediment cores and fish were also consistent with the implementation of stricter regulatory controls of direct releases of Hg to the atmosphere and surface waters during the same period. The southeastern USA had more upward Hg trends in fish than other regions for both site and state aggregated data. Upward Hg trends in fish from the southeastern USA were associated with increases in wet deposition in the region and may be attributed to a greater influence of global atmospheric Hg emissions in the southeastern USA. No significant trends were found in 62% of the fish species from six states from 1996 to 2005. A lack of Hg trends in fish in the more recent data was consistent with the lack of trends in wet Hg deposition at MDN sites and with relatively constant global emissions during the same time period. Although few significant trends were observed in the more recent Hg concentrations in fish, it is anticipated that Hg concentrations in fish will respond to changes in atmospheric Hg deposition, however, the magnitude and timing of the response is uncertain.     

Modelling of occupational respirable crystalline silica exposure for quantitative exposure assessment in community-based case-control studies

We describe an empirical model for exposure to respirable crystalline silica (RCS) to create a quantitative job-exposure matrix (JEM) for community-based studies. Personal measurements of exposure to RCS from Europe and Canada were obtained for exposure modelling. A mixed-effects model was elaborated, with region/country and job titles as random effect terms. The fixed effect terms included year of measurement, measurement strategy (representative or worst-case), sampling duration (minutes) and a priori exposure intensity rating for each job from an independently developed JEM (none, low, high). 23,640 personal RCS exposure measurements, covering a time period from 1976 to 2009, were available for modelling. The model indicated an overall downward time trend in RCS exposure levels of -6% per year. Exposure levels were higher in the UK and Canada, and lower in Northern Europe and Germany. Worst-case sampling was associated with higher reported exposure levels and an increase in sampling duration was associated with lower reported exposure levels. Highest predicted RCS exposure levels in the reference year (1998) were for chimney bricklayers (geometric mean 0.11 mg m(-3)), monument carvers and other stone cutters and carvers (0.10 mg m(-3)). The resulting model enables us to predict time-, job-, and region/country-specific exposure levels of RCS. These predictions will be used in the SYNERGY study, an ongoing pooled multinational community-based case-control study on lung cancer.     

Rapid one-step assays for on-site monitoring of mouse and rat urinary allergens

Allergy to rodent proteins is common among laboratory animal workers. Sensitive methods to measure exposure to these allergens have been developed. These assays are, however, expensive, time-consuming, and require a laboratory facility and methodological expertise. A simple method to screen for allergen spread, or to test whether hygiene standards are maintained, would be useful. Lateral flow immunoassays (LFIAs) are especially suited for field settings; the tests are simple and results are visible within minutes. LFIAs were developed for detection of the rodent urinary allergens Mus m 1 and Rat n 1. Pilot studies were performed in animal facilities in three countries using both extracts from airborne dust samples and samples collected by wiping surfaces. For comparison and determination of sensitivity, the concentrations of rodent urinary allergens in the samples were also measured using enzyme immunoassays (EIAs). The LFIAs for rat and mouse urinary allergens had a detection limit of 31 pg allergen per mL in a buffer system with purified allergen standards. Results of environmental dust extracts tested in LFIAs correlated well with levels obtained using EIAs. Spread of rodent allergens, or non-adherence to hygiene around laboratory animal facilities, may aggravate rodent allergy. Using a simple, sensitive one-step assay, allergens can be detected to prevent allergen exposure. The results reveal that the rapid assays are suited for on-site demonstration of exposure to rodent allergens, and thus, useful in occupational hygiene practice.     

What is the potential of trauma registry data to be used for road traffic injury surveillance and informing road safety policy?

Introduction

Information from hospital trauma registries is increasingly being used to support injury surveillance efforts. This research examines the potential of using trauma registry data for road traffic injury surveillance for different types of road users in terms of both the information collected and how representative trauma data are compared to two population-based road traffic injury data collections.

Methods

The three data collections were assessed against recommended variables to be collected for injury surveillance purposes and the representativeness of the distribution of road traffic-related injury data from the trauma registry was compared to hospital admission and road traffic authority data collections.

Results

Data from the trauma registry was largely not representative of the distribution of age groups or activities compared to the two population-based collections, but was representative for gender for some road user groups to at least one population-based data collection.

Conclusions

Trauma data could be used to supplement information from population-based data collections to inform road safety efforts.

Impact on Industry

Road safety policy makers should be aware of the potential and the limitations of using trauma registry data for road traffic injury surveillance.