From climate change impacts to adaptation: A development perspective for India

India has good reasons to be concerned about climate change as it could adversely affect the achievement of vital national development goals related to socio‐economic development, human welfare, health, energy availability and use, and infrastructure. The paper attempts to develop a framework for integrated impact assessment and adaptation responses, using a recently built railroad coastal infrastructure asset in India as an example. The framework links climate change variables — temperature, rainfall, sea level rise, extreme events, and other secondary variables — and sustainable development variables — technology, institutions, economic, and other policies. The study indicates that sustainable development variables generally reduce the adverse impacts on the system due to climate change alone, except when they are inadequately applied. The paper concludes that development is a vital variable for integrated impact assessment. Well crafted developmental policies could result in a less‐GHG intensive future, enhanced adaptive capacities of communities and systems, and lower impacts due to climate change.     

GIS-based hazard and vulnerability assessment of a torrential watershed

Environment, Development and Sustainability - Torrents are ephemeral streams which usually carry heavy bedload and flash flows. The frequent changes in its course caused by meandering and migration...     

Instrumental neutron activation analysis of ambient air dust particulates from metropolitan cities in India

Ambient air dust samples were collected from industrial, commercial and residential areas of four metropolitan cities (Delhi, Calcutta, Madras and Cochin) in India, and were analysed for 27 elements (As, Ba, Br, Ce, Co, Cr, Cs, Cu, Eu, Hf, Hg, Fe, Ga, La, Lu, Na, P, Sb, Sc, Se, Sr, Ta, Tb, Th, Rb, Yb and Zn) by Instrumental Neutron Activation Analysis (INAA). Samples were irradiated with thermal neutrons in a nuclear reactor for 1 day and counted by high resolution gamma spectrometry at different intervals. Several environmental standards such as Coal (SRM 1932b); Urban Particulate Matter (SRM 1648) from NIST, USA; Vehicle Exhaust from NIES, Japan; and Soil-5 from IAEA, Vienna were also analysed for quality assurance. The results reveal that the concentrations of several pollutant elements in dust samples from the four cities are highly variable. Wide differences were observed for elemental concentrations of As, Ba, Br, Cu, Cr, Hg, Fe, Sb, Se and Zn and these variations are explained in terms of their possible sources of origin.     

Future Greenhouse Gas and Local Pollutant Emissions for India: Policy Links and Disjoints

This paper estimates the future greenhousegas (GHG) and local pollutant emissions forIndia under various scenarios. Thereference scenario assumes continuation ofthe current official policies of the Indiangovernment and forecasts of macro-economic,demographic and energy sector indicators.Other scenarios analyzed are the economicgrowth scenarios (high and low), carbonmitigation scenario, sulfur mitigationscenario and frozen (development) scenario.The main insight is that GHG and localpollutant emissions from India, althoughconnected, do not move in synchronizationin future and have a disjoint under variousscenarios. GHG emissions continue to risewhile local pollutant emissions decreaseafter some years. GHG emission mitigationtherefore would have to be pursued for itsown sake in India. National energy securityconcerns also favor this conclusion sincecoal is the abundant national resource whilemost of the natural gas has to be imported.The analysis of contributing factors tothis disjoint indicates that sulfurreduction in petroleum oil products andpenetration of flue gas desulfurisationtechnologies are the two main contributorsfor sulfur dioxide (SO₂) mitigation.The reduction in particulate emissions ismainly due to enforcing electro-staticprecipitator efficiency norms in industrialunits, with cleaner fuels and vehicles alsocontributing substantially. These policytrends are already visible in India.Another insight is that high economicgrowth is better than lower growth tomitigate local pollution as lack ofinvestible resources limits investments incleaner environmental measures. Ouranalysis also validates the environmentalKuznets' curve for India as SO₂emissions peak around per capita GDP ofUS$ 5,300–5,400 (PPP basis) under variouseconomic growth scenarios.     

Removal of heavy metals by biosorption

Industrialization and urbanization have resulted in increased releases of toxic heavy metals into the natural environment comprising soils, lakes, rivers, groundwaters and oceans. Research on biosorption of heavy metals has led to the identification of a number of microbial biomass types that are extremely effective in bioconcentrating metals. Biosorption is the binding and concentration of adsorbate from aqueous solutions by certain types of inactive and dead microbial biomass. The novel types of biosorbents presently reviewed are grouped under fungal biomass, biomass of non-living, dried brown marine algae, agricultural wastes and residues, composite chitosan biosorbent prepared by coating chitosan, cellulose-based sorbents and bacterial strains. The reports discussed in this review collectively suggest the promise of biosorption as a novel and green bioremediation technique for heavy metal pollutants from contaminated natural waters and wastewaters.     

Catalytic hydrothermal treatment of pulping effluent using a mixture of Cu and Mn metals supported on activated carbon as catalyst

The present study was performed to investigate the performance of activated carbon-supported copper and manganese base catalyst for catalytic wet oxidation (CWO) of pulping effluent. CWO reaction was performed in a high pressure reactor (capacity?=?0.7 l) at temperatures ranging from 120 to 190 °C and oxygen partial pressures of 0.5 to 0.9 MPa with the catalyst concentration of 3 g/l for 3 h duration. With Cu/Mn/AC catalyst at 190 °C temperature and 0.9 MPa oxygen partial pressures, the maximum chemical oxygen demand (COD), total organic carbon (TOC), lignin, and color removals of 73, 71, 86, and 85 %, respectively, were achieved compared to only 52, 51, 53, and 54 % removals during the non-catalytic process. Biodegradability (in terms of 5-day biochemical oxygen demand (BOD₅) to COD ratio) of the pulping effluent was improved to 0.38 from an initial value of 0.16 after the catalytic reaction. The adsorbed carbonaceous fraction on the used catalyst was also determined which contributed meager TOC reduction of 3–4 %. The leaching test showed dissolution of the metals (i.e., Cu and Mn) from the catalysts in the wastewater during CWO reaction at 190 °C temperature and 0.9 MPa oxygen partial pressures. In the future, the investigations should focus on the catalyst reusability.     

The dissolution of benzene, toluene, m-xylene and naphthalene from a residually trapped non-aqueous phase liquid under mass transfer limited conditions

The results of dissolution experiments for benzene, toluene, m-xylene and naphthalene (BTXN) from a relatively insoluble oil phase (tridecane), residually trapped in a non-sorbing porous medium, are described. This mixture was chosen to simulate dissolution of soluble aromatic compounds from a petroleum hydrocarbon mixture, e.g., crude oil, for which a large fraction of the mixture is relatively insoluble. The experiments were carried out at a small source length to interstitial velocity ratio, L/v, so that dissolution would be mass transfer limited (MTL). When fitted to data for toluene, a multiregion mass transfer model was found to predict the experimental data satisfactorily for the other components without adjustment of the mass transfer rate parameters. These results indicate that the dissolution process can be generalized for various hydrophobic organic compounds present in a multicomponent non-aqueous phase liquid (NAPL) when mass transfer limitations are present. This also suggests that dissolution data obtained for one compound can be useful for predicting the dissolution histories for other compounds from petroleum hydrocarbon mixtures.     

Influence of short-term irrigation of textile mill wastewater on the growth of chickpea cultivars

The effect of textile mill wastewater on germination, delay index, physiological growth parameters, and plant pigments of two cultivars of chickpea was studied. The aim of this study was to evaluate the suitability of textile mill wastewater (treated and untreated) at different concentrations (0, 6.25, 12.5, 25, 50, 75, and 100%) for irrigational purposes. The textile effluent did not show any inhibitory effect on seed germination at a lower concentration (6.25%). The other reported plant parameters (delay index, root length, shoot length, dry weight, chlorophyll, and carotenoid) also followed a similar trend. Seeds germinated in 100% effluents but did not survive for longer periods. It has also been concluded that the effect of the textile effluent is cultivar-specific, and due care should be taken before using the textile mill wastewater for irrigation purposes.