Recent trends and current practices for secondary processing of zinc and lead. Part I: lead recovery from secondary sources.

Implementation of stricter environmental laws and economic reasons has forced all the metallurgical industries to go for eco-friendly technologies to produce metal and other related products. However, generation of wastes is an integral part of metallurgical industries. If the wastes/residues are hazardous in nature, they generally have to be treated or/and disposed of in safe and designated dumping sites. If these wastes/residues are non-hazardous in nature, then they may be suitable for use as secondary raw material to recover metals such as lead, copper etc., which are in growing demand all over the world. The processing of lead secondaries is important because of their relative high metal content, as well as the low energy and cost involved in recovering the metal. This paper mainly focuses on the current practices and recent trends in the secondary processing of lead. Various processes, particularly hydrometallurgical ones, already developed or in the development stages, are discussed. Attempts made by various Council of Scientific and Industrial Research (CSIR) Laboratories including the National Metallurgical Laboratory (NML) and industries such as Binani Zinc to develop eco-friendly processes for the recovery of lead from secondary raw materials are also described.     

Assessment of six Indian cultivars of mung bean against ozone by using foliar injury index and changes in carbon assimilation, gas exchange, chlorophyll fluorescence and photosynthetic pigments

Six Indian cultivars of Vigna radiata L. (HUM-1, HUM-2, HUM-6, HUM-23, HUM-24 and HUM-26) were exposed with ambient and elevated (ambient + 10 ppb ozone (O₃) for 6 h?day^?1) level of O₃ in open top chambers. Ozone sensitivity was assessed by recording the magnitude of foliar visible injury and changes in various physiological parameters. All the six cultivars showed visible foliar symptoms due to O₃, ranging 7.4 to 55.7 % injured leaf area. O₃ significantly depressed total chlorophyll, photosynthetic rate (Ps), quantum yield (F _v/F _m) and total biomass although the extent of variation was cultivar specific. Cultivar HUM-1 showed maximum reduction in Ps and stomatal conductance. The fluorescence parameters also indicated maximum damage to PSII reaction centres of HUM-1. Injury percentage, chlorophyll loss, Ps, F _v/F _m and total biomass reduced least in HUM-23 depicting highest O₃ resistance (R%).     

Assessment of the interactive effects of ambient O3 and NPK levels on two tropical mustard varieties (Brassica campestris L.) using open-top chambers

Rising O(3) concentrations in agricultural areas have been identified as a significant threat to crop production in Asia including India. The present work reports the results of a field study conducted to assess the usefulness of higher than recommended NPK dose in modifying the physiological, growth, yield, and seed quality responses of two mustard (Brassica campestris L. var. Vardan and Aashirwad) varieties under ambient ozone level at a rural site of India, using open-top chambers. Twelve hourly mean O(3) concentrations ranged between 27.7 and 59.04 ppb during the growth period. Plants in nonfiltered chambers (NFCs) showed reductions in photosynthetic rate, stomatal conductance, and growth parameters compared to the plants in filtered chambers (FCs), but reductions were of lower magnitude at 1.5 times recommended dose of NPK (1.5 RNPK) compared to recommended (RNPK). Yield and seed quality reduced significantly in plants of NFCs compared to FCs at RNPK, but no significant differences were recorded at 1.5 RNPK. There were higher N uptake and N uptake efficiency of plants in FCs compared to NFCs. Nitrogen utilization efficiency increased in Vardan, but decreased in Aashirwad in NFCs compared to FCs suggesting higher capability of N acquisition and utilization under ambient O(3), which led to a less pronounced reduction in the yield of the former than the latter variety. The differential nitrogen utilization efficiency in these varieties may be potentially used as measure of sensitivity characteristics in breeding programs for yield improvement in mustard under the present trend of increase in O(3) concentrations.     

Analysis of Wind Farm Output: Estimation of Volatility Using High-Frequency Data

In the financial year 2011–2012, wind farms supplied 26 % of South Australia’s electricity demand according to the Australian Energy Market Operator’s report. This contribution has risen from zero in 2003. The operation of the electricity grid depends heavily on knowledge of the variability of supply. Wind farm output displays similar conditional volatility as financial market variables. In this paper, a new method of estimating wind farm output volatility on a 5-min time scale is developed through the use of higher-frequency wind farm output data. First, an autoregressive model for the high-frequency data is developed, and it is used to derive a volatility measure for 5-min data. The results are also true in certain general situations when the high-frequency data follow an autoregressive moving average process or exhibits long memory features. The methods described here are analogous to realised volatility measures used in financial series, except that wind farm output data are measured at uniform intervals, unlike random trading times for financial transactions.     

Anaerobic digestion of fruit and vegetable waste: a critical review of associated challenges

Environmental Science and Pollution Research - The depletion of fossil fuels coupled with stringent environmental laws has encouraged us to develop sustainable renewable energy. Due to its numerous...     

Distribution of detoxifying genes polymorphism in Maharastrian population of central India

The present study is aimed at evaluating the genotype frequency of detoxifying genes such as GSTM1, GSTT1 and NQO1 in Maharastrian population of central India. The study revealed about 64.6% of GSTM1-positive and 35.4% GSTM1-null population. GSTT1-positive genotype was found to be 87.5% and GSTT1-null showed 12.5%. The NQO1 genotype of Maharastrian population showed 52.3% of C/C, 42.48% C/T and 5.18% T/T. The NQO1 of this population does not deviate from the expected Hardy-Weinberg equilibrium. The genotype frequencies GSTM1 and GSTT1 of the population when compared with other ethnic groups of Asia and Caucasians show distinct nature of Maharastrian population from other Asian and Caucasian population.     

Modelling tritium and phosphorus transport by preferential flow in structured soil

Subsurface solute transport through structured soil is studied by model interpretation of experimental breakthrough curves from tritium and phosphorus tracer tests in three intact soil monoliths. Similar geochemical conditions, with nearly neutral pH, were maintained in all the experiments. Observed transport differences for the same tracer are thus mainly due to differences in the physical transport process between the different monoliths. The modelling is based on a probabilistic Lagrangian approach that decouples physical and chemical mass transfer and transformation processes from pure and stochastic advection. Thereby, it enables explicit quantification of the physical transport process through preferential flow paths, honouring all independently available experimental information. Modelling of the tritium breakthrough curves yields a probability density function of non-reactive solute travel time that is coupled with a reaction model for linear, non-equilibrium sorption–desorption to describe the phosphorus transport. The tritium model results indicate that significant preferential flow occurs in all the experimental soil monoliths, ranging from 60–100% of the total water flow moving through only 25–40% of the total water content. In agreement with the fact that geochemical conditions were similar in all experiments, phosphorus model results yield consistent first-order kinetic parameter values for the sorption–desorption process in two of the three soil monoliths; phosphorus transport through the third monolith cannot be modelled because the apparent mean transport rate of phosphorus is anomalously rapid relative to the non-adsorptive tritium transport. The occurrence of preferential flow alters the whole shape of the phosphorus breakthrough curve, not least the peak mass flux and concentration values, and increases the transported phosphorus mass by 2–3 times relative to the estimated mass transport without preferential flow in the two modelled monoliths.     

Validation of a standardized portable fluorescence method for determining trace beryllium in workplace air and wipe samples

Beryllium is widely used in industry for its unique properties; however, occupational exposure to beryllium particles can cause potentially fatal disease. Consequently, exposure limits for beryllium particles in air and action levels on surfaces have been established to reduce exposure risks for workers. Field-portable monitoring methods for beryllium are desired in order to facilitate on-site measurement of beryllium in the workplace, so that immediate action can be taken to protect human health. In this work, a standardized, portable fluorescence method for the determination of trace beryllium in workplace samples, i.e., air filters and dust wipes, was validated through intra- and inter-laboratory testing. The procedure entails extraction of beryllium in 1% ammonium bifluoride (NH(4)HF(2), aqueous), followed by fluorescence measurement of the complex formed between beryllium ion and hydroxybenzoquinoline sulfonate (HBQS). The method detection limit was estimated to be less than 0.02 microg Be per air filter or wipe sample, with a dynamic range up to greater than 10 microg. The overall method accuracy was shown to satisfy the accuracy criterion (A< or = +/-25%) for analytical methods promulgated by the US National Institute for Occupational Safety and Health (NIOSH). Interferences from numerous metals tested (in >400-fold excess concentration compared to that of beryllium) were negligible or minimal. The procedure was shown to be effective for the dissolution and quantitative detection of beryllium extracted from refractory beryllium oxide particles. An American Society for Testing and Materials (ASTM) International voluntary consensus standard based on the methodology has recently been published.     

Impact assessment of a hydroelectric project on the flora in the Western Himalayan region based on vegetation analysis and socio-economic studies

This study provides an overview of the impacts of a proposed hydroelectric power project in the Western Himalayan region in India, using a primary database on floristic diversity and vegetation analysis. The remote sensing data revealed that in the submergence zone only mixed deciduous forest that occupies 807.5 ha area and has a wood biomass volume of 4,027,503 m³ is likely to be lost due to impoundment. A total of 165 plant species found in the submergence zone also occur in the influence and free draining catchment area of the project. In the influence zone of the project area only one tree species (Acer oblongum) is found under conservation threat category, which is also present in the free draining catchment of the project. The project affected population (6716 people) residing in the submergence and influence zone depend upon the surrounding forests for fuel wood, fodder, wild edibles etc., and most likely they will settle in the nearby areas, thus mounting more pressure on residual forests of the influence zone for various forest products. Further, from the vegetation analysis it is evident that several tree species (e.g. Lannea coromandelica, Terminalia alata, T. bellerica etc.), may face more pressure from exploitation as they provide a number of useful products and are represented in lower numbers in the forests of the project area. To compensate for the loss of various goods and services provided by the forests falling in the submergence zone and to offset the increased pressure of the project affected families on the forests of influence zone, a biodiversity management plan is suggested incorporating socio-economic considerations.