Presence of macrolide-lincosamide-streptogramin B and tetracycline antimicrobials in swine waste treatment processes and amended soil.

Little is known about the fate of antimicrobials during common agricultural waste handling procedures. To better define the potential scope of this problem, concentrations of antimicrobials throughout the waste treatment process were estimated based on known antimicrobial usage, and the resulting predictions of high antimicrobial concentrations indicated the need for further investigation. Samples from building pits, a solids settling basin, a holding pond, and soil amended with waste treatment byproducts were therefore analyzed for traditional chemical parameters and macrolide, lincosamide, and tetracycline antimicrobials. Substantial improvements in water quality were observed during the treatment process. While the macrolide tylosin was not detected, chlortetracycline, oxytetracycline, and lincomycin were found at high concentrations throughout the waste treatment process. Oxytetracycline and lincomycin were also detected in soil from a field amended with waste treatment byproducts.     

Control of common freshwater predatory fish, Channa punctatus, through Nerium indicum leaf extracts

The diethyl ether, chloroform, acetone and methanol extract of Nerium indicum leaf were evaluated for their piscicidal activity against common freshwater air breathing predatory fish Channa punctatus. The rank of order of toxicity (LC50) of the leaf extract was, diethyl ether extract (17.34 mg/l)>acetone (40.01 mg/l)>chloroform (40.61 mg/l)>and methanol (106.37 mg/l). There was a significant negative correlation between LC50 values and exposure periods. Thus increase in exposure period, LC50 decreases from 17.34 mg/l (24 h) to >13.58 mg/l (96 h) in the diethyl ether extract. Similar trends were also observed in acetone, chloroform and methanol extracts. Exposure of sub-lethal doses (40% and 80% of LC50) of the diethyl ether extract of N. indicum leaf (which has maximum piscicidal activity) for 24 or 96 h caused significant alteration in the level of total protein, total free amino acid, nucleic acid, glycogen, pyruvate, lactate and activity of enzyme protease, phosphatases, alanine aminotransferase, aspartate aminotransferase and acetylcholinesterase in liver and muscle tissue. The alterations in all the above biochemical parameters were significantly (P<0.05) time and dose dependent. There was a significant recovery in all the above biochemical parameters, in both liver and muscle tissues of fish after the seventh day of the withdrawal of treatment. Thus, the leaf extracts of N. indicum have potent piscicidal activity against fish C. punctatus and also significantly affect both aerobic and anaerobic pathway of respiration in fish.     

An Enzymatic Method for Harvesting Functional Melanosomes after Keratin Extraction: Maximizing Resource Recovery from Human Hair

Journal of Polymers and the Environment - Hair contains about 80% keratins and 1–3% melanin packaged in melanosomes. Both of these are high-value and functional raw materials that have...     

Recent trends and current practices for secondary processing of zinc and lead. Part I: lead recovery from secondary sources.

Implementation of stricter environmental laws and economic reasons has forced all the metallurgical industries to go for eco-friendly technologies to produce metal and other related products. However, generation of wastes is an integral part of metallurgical industries. If the wastes/residues are hazardous in nature, they generally have to be treated or/and disposed of in safe and designated dumping sites. If these wastes/residues are non-hazardous in nature, then they may be suitable for use as secondary raw material to recover metals such as lead, copper etc., which are in growing demand all over the world. The processing of lead secondaries is important because of their relative high metal content, as well as the low energy and cost involved in recovering the metal. This paper mainly focuses on the current practices and recent trends in the secondary processing of lead. Various processes, particularly hydrometallurgical ones, already developed or in the development stages, are discussed. Attempts made by various Council of Scientific and Industrial Research (CSIR) Laboratories including the National Metallurgical Laboratory (NML) and industries such as Binani Zinc to develop eco-friendly processes for the recovery of lead from secondary raw materials are also described.     

Profenofos induced modulation in physiological indices,genomic template stability and protein banding patterns of Anabaena sp. PCC 7120

To understand the mechanism underlying organophosphate pesticide toxicity, cyanobacterium Anabaena PCC 7120 was subjected to varied concentrations (0, 5, 10, 20 and 30 mg L^?1) of profenofos and the effects were investigated in terms of changes in cellular physiology, genomic template stability and protein expression pattern. The supplementation of profenofos reduced the growth, total pigment content and photosynthetic efficiency of the test organism in a dose dependent manner with maximum toxic effect at 30 mg L^?1. The high fluorescence intensity of 2′, 7′ –dichlorofluorescin diacetate and increased production of malondialdehyde confirmed the prevalence of acute oxidative stress condition inside the cells of the cyanobacterium. Rapid amplified polymorphic DNA (RAPD) fingerprinting and SDS-PAGE analyses showed a significant alteration in the banding patterns of DNA and proteins respectively. A marked increase in superoxide dismutase, catalase, peroxidase activity and a concomitant reduction in glutathione content indicated their possible role in supporting the growth of Anabaena 7120 up to 20 mg L^?1. These findings suggest that the uncontrolled use of profenofos in the agricultural fields may not only lead to the destruction of the cyanobacterial population, but it would also disturb the nutrient dynamics and energy flow.     

Distribution and ecotoxicological concerns of persistent organic pollutants in sediment from creek ecosystem

In order to study the distribution and ecotoxicological concerns of persistent organic pollutants, grab sediment samples were collected from different locations across Thane creek, India. Analyses of samples were carried out using gas chromatography (GC)–electron capture detector and GC–mass spectrometry techniques. In organochlorine pesticides (OCPs), DDT (1,1,1,-trichloro-2,2-bis(p-chlorophenyl) ethane), DDE (1,1-dichloro-2,2-bis(p-chlorophenyl) ethylene), DDD (1-chloro-4-(2,2-dichloro-1-(4-chlorophenyl)ethyl) benzene) and α, β, and γ conformer of hexachlorocyclohexane (HCH), and 9 polychlorinated biphenyls (PCBs) congeners were analyzed in surface sediment samples. Concentrations of these pollutants in grab sediment samples may indicate their current use and impact on marine ecosystem. Average concentrations of total DDT (including DDD and DDE), HCH, and Σ₉PCBs were found to be 4.9, 12.5, and 2.9 µg kg^?1(dry weight) respectively. High concentrations of OCPs and PCBs were found at discharge locations in creek compared to other locations. Location-wise distribution of OCPs and PCBs indicates their high concentrations at the waste water receiving point. Data were compared for ecotoxicological impacts based on the levels specified in the sediment quality standards of the US Environmental Protection Agency and the Canadian Council of Ministers of the Environment. γ-HCH was found to have maximum potential to induce ecotoxicological impacts.     

Modelling tritium and phosphorus transport by preferential flow in structured soil

Subsurface solute transport through structured soil is studied by model interpretation of experimental breakthrough curves from tritium and phosphorus tracer tests in three intact soil monoliths. Similar geochemical conditions, with nearly neutral pH, were maintained in all the experiments. Observed transport differences for the same tracer are thus mainly due to differences in the physical transport process between the different monoliths. The modelling is based on a probabilistic Lagrangian approach that decouples physical and chemical mass transfer and transformation processes from pure and stochastic advection. Thereby, it enables explicit quantification of the physical transport process through preferential flow paths, honouring all independently available experimental information. Modelling of the tritium breakthrough curves yields a probability density function of non-reactive solute travel time that is coupled with a reaction model for linear, non-equilibrium sorption–desorption to describe the phosphorus transport. The tritium model results indicate that significant preferential flow occurs in all the experimental soil monoliths, ranging from 60–100% of the total water flow moving through only 25–40% of the total water content. In agreement with the fact that geochemical conditions were similar in all experiments, phosphorus model results yield consistent first-order kinetic parameter values for the sorption–desorption process in two of the three soil monoliths; phosphorus transport through the third monolith cannot be modelled because the apparent mean transport rate of phosphorus is anomalously rapid relative to the non-adsorptive tritium transport. The occurrence of preferential flow alters the whole shape of the phosphorus breakthrough curve, not least the peak mass flux and concentration values, and increases the transported phosphorus mass by 2–3 times relative to the estimated mass transport without preferential flow in the two modelled monoliths.     

Identification of species-specific RAPD markers in genus Cenchrus

Cenchrus is an important component of major grass cover of world. Similar to the other major tropical grasses most of the species in genus Cenchrus are also apomictic in nature hence correct and precise identification of accessions and species are problematic and dubious. In the present study 187 decamer oligonucleotide primers were tested for PCR-based DNA amplification of six prominent species of genus Cenchrus. Of these, 32 potential repetitive and polymorphic primers were tested for identification of species-specific markers for C. ciliaris, C. setigerus, C. pennisetiformis, C. prieurri, C. biflorus and C. myosuroides. These primers yielded 51 unique RAPD markers either specific to a species (37) or shared by two or more species (14). Maximum markers were shared between C. ciliaris and C. setigerus confirming theirmore closeness to each other Primers like OPF09, OPF11, OPR15, OPAJ11, OPQ10 and OPAK20 generated strong intense bands can be used on priority in identifying the species from their natural habitat for the development of species-specific core germplasm. Due to apomictic nature this is the prime method of developing cultivars, as morphological characters are largely unable to distinguish them. The level of variation observed clearly suggest RAPD as an appropriate marker for genetic studies and in identifying the lines with species-specific markers for Cenchrus germplasm management activity and also maintaining identity and purity for proprietary reasons.