Analyzing the hydrologic effects of region-wide land and water development interventions: a case study of the Upper Blue Nile basin

In the drylands of the Upper Blue Nile basin, high climate variability and land degradation are rampant. To enhance adaptive capacity in the region, various soil and water conservation interventions have been implemented. Moreover, water resources development schemes such as the Grand Ethiopian Renaissance Dam should be implemented by 2025. We modeled the effects of these interventions on surface runoff in the basin for both current and future (2025) basin conditions, using the runoff coefficient method in a spatially explicit approach. Under current conditions, we observed high spatial variability of mean annual runoff. The northeastern Blue Nile-1 sub-basin produces the highest mean annual runoff (391 mm or 10 × 10⁹ m³), whereas the northwestern Blue Nile-2 sub-basin produces the lowest mean annual runoff (178 mm or 0.2 × 10⁹ m³). The basin generates a total annual runoff volume of 47.7 × 10⁹ m³, of which about 54 % comes from cultivated land. The strong association between land use and topography masked the direct effect of rainfall on runoff. By 2025, total annual runoff yield could decrease by up to 38 % if appropriate basin-wide soil and water conservation interventions and the Grand Ethiopian Renaissance Dam are implemented. However, the full effects of most physical structures will only last for 1 or 2 years without regular maintenance. The improved understanding of the dynamics of the Upper Blue Nile basin’s hydrology provided by the present study will help planners to design appropriate management scenarios. Developing the basin’s database remains important for a holistic understanding of the impacts of future development interventions.     

Synthesis of novel polymer type sulfoxide solid phase combined with the porogen imprinting for enabling selective separation of polychlorinated biphenyls

We developed a novel polymer type sulfoxide-modified solid phase enabling to achieve selective separation of polychlorinated biphenyls (PCBs) from insulation oil. In this study, firstly we prepared base-polymer based on the concept of the molecular imprinting to capture PCBs in selectively, then, the sulfoxide groups were modified on the pore surface of base-polymers by changing preparation methods. As results of liquid chromatographic analyses for the polymers as columns, the base-polymer prepared by xylene as a porogenic solvent showed selective retention ability for chlorinated aromatic compounds by the porogen imprinting effect. Additionally, the polymer-type sulfoxide solid phases showed highly retention ability for PCBs by increasing amount of introduced sulfoxide groups. Consequently, the results of separation of PCBs comparing to insulation oil suggested that the prepared solid phase can be used for the selective separation of PCBs at the same level as a commercially available media utilized for the regulated method.     

Distribution of pesticides and bisphenol A in sediments collected from rivers adjacent to coral reefs

To investigate the deteriorating health of coral reefs in Okinawa, Japan, natural sediment samples were analyzed for diuron, Irgarol 1051, chlorpyrifos, and bisphenol A (BPA) which are hazardous to corals. Samples were analyzed by solid-phase extraction (SPE) followed by high-performance liquid chromatography with tandem mass spectrometry (LC–MS–MS). Although diuron and chlorpyrifos usage is only well recorded for farms and not for cities, these chemicals were detected in both rural and urban areas. Additionally, diuron concentration in urban areas was in some cases higher than in rural areas, which might be caused by greater consumption of these chemicals in home gardens in city areas. Irgarol 1051 was detected in downstream river areas, which are situated far from the source sites such as pier or fishery harbor (0.6–3.2 km). This result suggested that Irgarol 1051 could be transported from the river mouths to the sampling sites during flood tides. High BPA concentrations were associated with urban areas (<1.2–22.0 μg kg⁻¹), while low concentrations were associated with rural areas (nd–6.8 μg kg⁻¹). The river sediments under study are delivered to coral reefs in large quantity through runoff caused by typhoons and other heavy rains. The highly hazardous chemicals are carried into coral reefs on these sediments. Therefore, these hazardous chemical substances may already be influencing the coral reefs.     

Evaluation by year of the valuable/hazardous material content of lithium-ion secondary battery cells and other components of notebook computer battery packs

Journal of Material Cycles and Waste Management - Our objective was to provide the information necessary to efficiently recover metals from end-of-life lithium-ion secondary batteries by assessing...     

Differences in the Spatial Variability Among CO2, CH4, and N2O Gas Fluxes from an Urban Forest Soil in Japan

The spatial variability of carbon dioxide (CO₂), methane (CH₄), and nitrous oxide (N₂O) fluxes from forest soil with high nitrogen (N) deposition was investigated at a rolling hill region in Japan. Gas fluxes were measured on July 25th and December 5th, 2008 at 100 points within a 100 × 100 m grid. Slope direction and position influenced soil characteristics and site-specific emissions were found. The CO₂ flux showed no topological difference in July, but was significantly lower in December for north-slope with coniferous trees. Spatial dependency of CH₄ fluxes was stronger than that of CO₂ or N₂O and showed a significantly higher uptake in hill top, and emissions in the valley indicating strong influence of water status. N₂O fluxes showed no spatial dependency and exhibited high hot spots at different topology in July and December. The high N deposition led to high N₂O fluxes and emphasized the spatial variability.     

Study of Hg and SO3 behavior in flue gas of oxy-fuel combustion system

Oxy-fuel combustion systems have been under development to reduce CO₂ emissions from coal-fired power plants. In oxy-fuel combustion system, Hg in the flue gas causes corrosion in CO₂ purification and compression units. Also, SO₃ in the flue gas corrodes the equipment and ducts of oxy-fuel combustion system. Therefore, Hg and SO₃ need to be removed.Babcock-Hitachi conducted tests using a 1.5 MWth Combustion & Air Quality Control System (AQCS) test facility which consists of oxygen supply unit, furnace, Selective Catalytic Reduction (SCR) catalyst, Clean Energy Recuperator (CER), Dry Electrostatic Precipitator (DESP), flue gas recirculation system, Wet Flue Gas Desulfurization (WFGD), and CO₂ Compression and Purification Unit (CPU). In both cases of air and oxy-fuel combustion, the Hg removal across the DESP could be improved, and SO₃ concentration at the DESP outlet could be reduced to less than 1 ppm by installing a CER upstream of the DESP and reducing the gas temperature at the DESP inlet. Hg was not dissolved in the drain recovered from CO₂ compressor, and may be adsorbed at an inner part of CO₂ compressor. This indicated that Hg needs to be removed at a location upstream of the CO₂ compressor to prevent corrosion of the compressor.     

The sensitivity of carbon sequestration to harvesting and climate conditions in a temperate cypress forest: Observations and modeling

The role of disturbance and climate factors in determining the forest carbon balance was investigated at a Japanese cypress forest in central Japan with eddy flux measurements, tree-ring analyses, and a terrestrial biosphere model. The forest was established as a plantation after intermittent harvesting and replanting between 1959 and 1977, and acted as a strong carbon sink of approximately 500 g C m⁻² year⁻¹ for the measurement years between 2001 and 2007. A terrestrial biosphere model, BIOME-BGC, was validated using the eddy flux data at daily to interannual timescales, and the tree-ring width data at interannual to decadal timescales. According to the model simulation, during the observation period 270 ± 55 g C m⁻² year⁻¹ was additionally sequestered due to the indirect effects of the harvesting and planting, whereas the increase of CO₂ concentration and the change in climate increased the sink of 110 ± 40 and 30 ± 80 g C m⁻² year⁻¹, respectively. The model simulation shows that the forest is now recovering from harvesting, and that harvesting is a more important determinant of the current carbon sink than either interannual climate anomalies or increased atmospheric CO₂ concentration. We found that harvesting with long rotation length could be effective management activity in order to increase carbon sequestration, if the harvested timber is converted into products with long lifecycles.     

Material flow analysis of used personal computers in Japan

Most personal computers (PCs) are discarded by consumers after the data files have been moved to a new PC. Therefore, a used PC collection scheme should be created that does not depend on the distribution route of new PCs. In Japan, manufacturers’ voluntary take-back recycling schemes were established in 2001 (for business PCs) and 2003 (for household PCs). At the same time, the export of used PCs from Japan increased, affecting the domestic PC reuse market. These regulatory and economic conditions would have changed the flow of used PCs.In this paper, we developed a method of minimizing the errors in estimating the material flow of used PCs. The method’s features include utilization of both input and output flow data and elimination of subjective estimation as much as possible. Flow rate data from existing surveys were used for estimating the flow of used PCs in Japan for fiscal years (FY) 2000, 2001, and 2004. The results show that 3.92 million and 4.88 million used PCs were discarded in FY 2000 and 2001, respectively. Approximately two-thirds of the discarded PCs were disposed of or recycled within the country, one-fourth was reused within the country, and 8% were exported. In FY 2004, 7.47 million used PCs were discarded. The ratio of domestic disposal and recycling decreased to 37% in FY 2004, whereas the domestic reuse and export ratios increased to 37% and 26%, respectively. Flows from businesses to retailers in FY 2004 increased dramatically, which led to increased domestic reuse. An increase in the flow of used PCs from lease and rental companies to secondhand shops has led to increased exports. Results of interviews with members of PC reuse companies were and trade statistics were used to verify the results of our estimation of domestic reuse and export of used PCs.