Reactivity between PbSO4 and CaCO3 particles relevant to the modification of mineral particles and chemical forms of Pb in particles sampled at two remote sites during an Asian dust event

During the transboundary transport of anthropogenic heavy metals by mineral particles providing reaction sites, the divalent metal salt PbSO₄ can be converted to PbCO₃ in the presence of water. We carried out laboratory experiments to study the transformation process under various conditions by incorporating test particles comprising CaCO₃ of a particulate mineral component, PbSO₄, and NaCl. After the immersion of PbSO₄ particles in contact with CaCO₃ particles in a water droplet, the conversion of PbSO₄ into PbCO₃ was confirmed by the change in morphology of the original particles to stick or needle form; the percentages of the chemical forms relative to the total Pb were determined by X-ray absorption near edge structure (XANES) analysis. Approximately 60–80% of PbSO₄ was converted to PbCO₃ after 24 h. A small amount of stick particles was detected when NaCl particles attached to PbSO₄/CaCO₃ particles were exposed to air with a relative humidity (RH) of 80–90% for 24 h. XANES measurements of the samples revealed that the molar percentage of PbCO₃ relative to the total Pb content was 4%.Field experiments were also conducted to determine the chemical forms of the Pb particles during the Kosa (Asian dust storm) event. Samples were collected from two remote sites in Japan and Korea. The mass size distribution of Pb aerosols collected in Japan was bimodal with two peaks in the coarse mode; the enrichment factor of Pb suggested that its source was anthropogenic. Pb L3 edge XANES measurements of both samples indicated that they had similar shapes. These measurements also indicated that the major Pb components for the samples collected in Japan were PbO, PbSO₄ PbCl₂, and PbCO₃, with molar percentages of 44%, 30%, 21%, and 5%, respectively. No significant differences were found between the component ratios of the samples collected in Japan and Korea, suggesting that definite transformation did not occur during the transport of the Kosa particles from Korea to Japan. On the basis of these observations, we postulate that the transformation process either occurred mainly before the particles arrived at Korea or did not take place after the particles left continental Asia.     

Dehydrochlorination behavior of polyvinyl chloride and utilization of carbon residue: effect of plasticizer and inorganic filler

The dehydrochlorination behavior of plasticizer (DOP) and inorganic filler (CaCO₃) contained in PVC samples and the properties of the activated carbons produced from those carbon residues have been investigated. In the dehydrochlorination process, both additives contributed not only to a decrease in HCl yield but also to the prolonged evolution of HCl. Part of the Cl species were observed to be stabilized as CaCl₂ by reaction with calcium ions when CaCO₃ was added. More than 80% of chlorine removal was achieved in all samples at 533 K. The use of potassium as an activation agent led to the production of activated carbon with a specific surface area greater than 1000 m²/g at the low temperature of 1023 K and assisted also in the elimination of residual Cl species by the formation of KCl during activation. Chemical Feedstock Recycling & Other Innovative Recycling Techniques 6     

Novel enzymatic activity of cell free extract from thermophilic Geobacillus sp. UZO 3 catalyzes reductive cleavage of diaryl ether bonds of 2,7-dichlorodibenzo-p-dioxin

We characterized the ability of the cell free extract from polychlorinated dibenzo-p-dioxins degrading bacterium Geobacillus sp. UZO 3 to reduce even highly chlorinated dibenzo-p-dioxins such as octachlorodibenzo-p-dioxins in incineration fly ash. The degradation of 2,7-dichlorodibenzo-p-dioxin (2,7-DCDD) as a model dioxin catalyzed by the cell free extract from this strain implicates that the ether bonds of 2,7-DCDD molecule undergo reductive cleavage, since 4′,5-dichloro-2-hydroxydiphenyl ether and 4-chlorophenol were detected as intermediate products of 2,7-DCDD degradation.     

Anaerobic biodegradation of 4-alkylphenols in a paddy soil microcosm supplemented with nitrate

Anaerobic degradation of phenol, p-cresol, 4-n-propylphenol (n-PP), 4-i-propylphenol (i-PP), 4-n-butylphenol (n-BP) and 4-sec-butylphenol (sec-BP) was observed in a paddy soil supplemented with nitrate. We detected the metabolites 4′-hydroxypropiophenone (HPP) from n-PP, 4-i-propenylphenol from i-PP, and 4-(1-butenyl)phenol and 4′-hydroxybutyrophenone (HBP) from n-BP. Compared with the original soils, Betaproteobacteria became predominant in the microcosm during the degradation of phenol and p-cresol whereas no remarkable change was observed in the community degrading propylphenols and butylphenols. The microcosm, however, did not degrade 4-t-butylphenol (t-BP), 4-t-octylphenol (t-OP) and 4-n-octylphenol (n-OP). Paddy soil supplemented with sulfate or iron (III) as electron acceptors did not degrade phenol and 4-alkylphenols with the exception of the degradation of p-cresol in sulfate-reducing conditions. It was demonstrated for the first time that anaerobic microbial degradation of alkylphenols, in a paddy soil supplemented with nitrate as an electron acceptor, occurred via oxidation of the alpha carbon in the alkyl chain.     

Analysis of branched-chain fatty acids in humic substances as indices for compost maturity by pyrolysis–gas chromatography/mass spectrometry with tetramethylammonium hydroxide (TMAH-py–GC/MS)

Parameters that affect the degree of humification for humic substances (HSs) are deeply related to the maturity of the compost. In general, the matured composts contain HSs with a higher degree of humification. In addition, microbial activities during composting are also one of the indices for compost maturation. Branched-chain fatty acids are metabolites as the result of microbial activities in a soil environment. Such branched-chain fatty acids, regarded as humic precursors, are incorporated into HSs during the composting process. To determine whether branched-chain fatty acids in HSs can be used as biomarkers during composting processes or not, HSs were extracted from three types of composts with the different maturation, and the branched-chain fatty acids in the HSs were analyzed by pyrolysis–gas chromatography/mass spectrometry with tetramethylammonium hydroxide (TMAH-py–GC/MS). HSs with a higher degree of humification (higher aromaticity and lower molecular weight) contained higher levels of branched-chain fatty acids. These results show that branched-chain fatty acids in HSs from matured compost samples can be used as biomarkers, which indicate the history of microbial activities during overall composting process.     

Development of a testing method for asbestos fibers in treated materials of asbestos containing wastes by transmission electron microscopy

Appropriate treatment of asbestos-containing wastes is a significant problem. In Japan, the inertization of asbestos-containing wastes based on new treatment processes approved by the Minister of the Environment is promoted. A highly sensitive method for testing asbestos fibers in inertized materials is required so that these processes can be approved. We developed a method in which fibers from milled treated materials are extracted in water by shaking, and are counted and identified by transmission electron microscopy. Evaluation of this method by using asbestos standards and simulated slag samples confirmed that the quantitation limits are a few million fibers per gram and a few μg/g in a sample of 50 mg per filter. We used this method to assay asbestos fibers in slag samples produced by high-temperature melting of asbestos-containing wastes. Fiber concentrations were below the quantitation limit in all samples, and total fiber concentrations were determined as 47–170 × 10^?6 f/g. Because the evaluation of treated materials by TEM is difficult owing to the limited amount of sample observable, this testing method should be used in conjunction with bulk analytical methods for sure evaluation of treated materials.     

Electroreductive dechlorination of chlorophenols with Pd catalyst supported on solid electrode

Electroreductive dechlorination of chlorophenols with Pd catalyst supported on solidelectrode was studied. As solid electrodes, carbon cloth (CC), carbon felt (CF) and titanium mesh were used, and palladium was plated on solid electrodes by either electrolytic or electroless method. On each electrode with Pd, chlorophenols were qualitatively dechlorinated to phenol, while they were entirely intact on electrodes without Pd. Moreover, neither base electrode nor plating method significantly affected the activity of Pd as far as it was sufficiently loaded on the electrode. Based on the results in the experiments using one electrode repeatedly, Pd catalyst proved to possess a satisfactory duarability under the present condition. It was suggested that the reactive species responsinble for the dechlorination of chlorophenols could be formed during preliminary electrolysis. Thus, (Pd)_x-H resulting from the adsorption of electrogenerated hydrogen on metallic Pd might be assumed most probable.     

Electroreductive dechlorination of chlorophenols with Pd catalyst supported on solid electrode

Electroreductive dechlorination of chlorophenols with Pd catalyst supported on solidelectrode was studied. As solid electrodes, carbon cloth (CC), carbon felt (CF) and titanium mesh were used, and palladium was plated on solid electrodes by either electrolytic or electroless method. On each electrode with Pd, chlorophenols were qualitatively dechlorinated to phenol, while they were entirely intact on electrodes without Pd. Moreover, neither base electrode nor plating method significantly affected the activity of Pd as far as it was sufficiently loaded on the electrode. Based on the results in the experiments using one electrode repeatedly, Pd catalyst proved to possess a satisfactory duarability under the present condition. It was suggested that the reactive species responsinble for the dechlorination of chlorophenols could be formed during preliminary electrolysis. Thus, (Pd)_x-H resulting from the adsorption of electrogenerated hydrogen on metallic Pd might be assumed most probable.     

The cost of stratospheric climate engineering revisited

Stratospheric aerosol injection (SAI) has been receiving increasing attention as a possible option for climate engineering. Its direct cost is perceived to be low, which has implications for international governance of this emerging technology. Here, we critically synthesize previous estimates of the underlying parameters and examine the total costs of SAI. It is evident that there have been inconsistencies in some assumptions and the application of overly optimistic parameter values in previous studies, which have led to an overall underestimation of the cost of aircraft-based SAI with sulfate aerosols. The annual cost of SAI to achieve cooling of 2 W/m² could reach US$10 billion with newly designed aircraft, which contrasts with the oft-quoted estimate of “a few billion dollars.” If existing aircraft were used, the cost would be expected to increase further. An SAI operation would be a large-scale engineering undertaking, possibly requiring a fleet of approximately 1,000 aircraft, because of the required high altitude of the injection. Therefore, because of its significance, a more thorough investigation of the engineering aspects of SAI and the associated uncertainties is warranted.