PAH deposition to snow surface

The urban snowpack effectively acts as a collection device for atmospheric-deposited PAHs. When these PAHs are flushed out in a short time interval along with springtime snowmelt, these cause shockloading to receiving waters. In order to assess the PAH deposition and accumulation in urban snowpacks, a deposition survey of PAH for the winter months of 1991-92 from the city of Sault Ste. Marie, Ontario, Canada was undertaken. The results of the survey are interpreted in view of prevailing meteorology and various emission sources in the study area. The relative PAH deposition levels (to BaP) are compared with relative source emission fingerprints to examine consistency in sampling and analysis. While analyzing the PAH samples using the ASTM (1987) method, the problem of concentration levels being below the detection level was encountered. The ASTM method for PAH analysis was modified to enhance the detection limit of the PAHs by concentrating the PAH extract to very low volumes, on the order of 200-300 microL.     

Geometric variability and surface finish of weld zones in Yb:YAG laser welded advanced high strength steels

Laser welding is used for joining advanced high strength steels (AHSS) to improve formability and performance. In this paper, the geometric variability observed in the fusion zones and heat affected zones of several combinations of AHSS (different types, coatings and thicknesses), which were butt welded using a Trumpf TRUDISK 6000^® Yb:YAG laser beam, is presented. The surface texture parameters such as roughness and waviness of laser welds were also measured and correlated with geometric variability. Results indicate that although high quality welds with minimal defects can be obtained using the Yb:YAG laser welding process, there is considerable variation in both the shape and the dimensions of weld zones. The variability increased with an increase in thickness differentials between the sheets being welded. Analysis of the top of the weld surfaces also suggested that aluminum coating on USIBOR samples contributes significantly to increased roughness. An increase in laser power coupled with corresponding increase in welding speed did not impact variability. A fair correlation between the surface roughness and weld region variability exists, although this needs further study.     

Fire ant venom alkaloids act as key attractants for the parasitic phorid fly, Pseudacteon tricuspis (Diptera: Phoridae)

The phorid fly, Pseudacteon tricuspis Borgmeier, is an introduced parasitoid of imported fire ants, Solenopsis spp., in the USA. Although the assumption that phorid flies use fire ant alarm pheromones for host location is probably true, we demonstrated in a previous study the possible involvement of other ant semiochemicals in the response of P. tricuspis to fire ants. This study was conducted to determine the glandular sources and identity of the semiochemicals mediating this interaction. First, we tested the electroantennogram response of P. tricuspis to extracts of key body parts and glands of workers of the red imported fire ant, S. invicta Buren. The results confirm that the poison (venom) gland/sac is the key source of compounds which elicited strong antennal activity in P. tricuspis. Follow-up studies were conducted by using a combination of bioassay-guided fractionation and behavioral bioassays to test the hypothesis that attraction of this parasitoid to fire ants is mediated by venom alkaloids. The results confirm the response of P. tricuspis to physiologically relevant amounts of the two venom alkaloid fractions (cis and trans alkaloid fractions) of S. invicta. Further analysis by coupled gas chromatography–electroantennogram detection revealed nine venom alkaloid components including two novel 2,6-dialkylpiperideines that elicited significant antennal activity in P. tricuspis. This is the first demonstration of the role of venom alkaloids of ants as attractants for their natural enemies. We propose a semiochemical-mediated host location mechanism for P. tricuspis involving both alarm pheromones and venom alkaloids. The ecological significance of these findings, including the attraction of male P. tricuspis to fire ant venom alkaloids, possibly for mate location, is discussed.     

Forest policies and programs affecting vulnerability and adaptation to climate change

Due to large scale afforestation programs and forest conservation legislations, India’s total forest area seems to have stabilized or even increased. In spite of such efforts, forest fragmentation and degradation continues, with forests being subject to increased pressure due to anthropogenic factors. Such fragmentation and degradation is leading to the forest cover to change from very dense to moderately dense and open forest and 253 km² of very dense forest has been converted to moderately dense forest, open forest, scrub and non-forest (during 2005–2007). Similarly, there has been a degradation of 4,120 km² of moderately dense forest to open forest, scrub and non-forest resulting in a net loss of 936 km² of moderately dense forest. Additionally, 4,335 km² of open forest have degraded to scrub and non-forest. Coupled with pressure due to anthropogenic factors, climate change is likely to be an added stress on forests. Forest sector programs and policies are major factors that determine the status of forests and potentially resilience to projected impacts of climate change. An attempt is made to review the forest policies and programs and their implications for the status of forests and for vulnerability of forests to projected climate change. The study concludes that forest conservation and development policies and programs need to be oriented to incorporate climate change impacts, vulnerability and adaptation.     

Five-wheel framework for system-based monitoring of heavy metal pollution in rivers

Sectorial approach for monitoring heavy metal pollution in rivers has failed to report realistic pollution status and associated ecological and human health risks. The increasing spread of heavy metals from different sources and emerging risks to human and environmental health call for reexamining heavy metal pollution monitoring frameworks. Also, the sources, spread, and load of heavy metals in the environment have changed significantly over time, requiring consequent modification in the monitoring frameworks. Therefore, studies on heavy metal monitoring in rivers conducted in the last decade were evaluated for experimental designs, research frameworks, and data presentations. Most studies (∼99%) (i) lacked inclusiveness of all environmental compartments; (ii) focused on “one pollutant – one/two compartment” or sometimes “one pollutant – one compartment – one effect” approach; and (iii) remained “data-rich but information poor.” An ecological approach with integrative system thinking is proposed to develop a holistic approach for monitoring river pollution. It is visualized that heavy metal monitoring, risk analyses, and water management must incorporate tracking pollutants in different environmental compartments of a river (water, sediment, and floodplain/bank soil) and consider correlating it with riverbank land use. The systems-based pollution monitoring and assessment studies will reveal the critical factors that drive heavy metals pollutant movement in ecosystems and associated potential risks to the environment, wildlife, and humans. Also, water quality and pollution indexing tools would help better communicate complex pollution data and associated risks among all stakeholders. Therefore, integrating systems approaches in scientific- and policy-based tools would help sustainably manage the health of rivers, wildlife, and humans.     

Experimental investigation on the effect of liquid phase and vapor phase separation over performance of falling film evaporator

Energy, cost, and environmental concerns play a vital role in understanding governing parameters of distributor design in falling film evaporators. Distributor design is a hidden parameter in many experimental papers. The uniform distribution of liquid refrigerant over the tube bundle mostly depends on two-phase liquid refrigerant and vapor refrigerant. This work conducted experiments with two distribution systems with and without separation of liquid-vapor refrigerant after expansion valve for the same evaporator capacity with R134a as a refrigerant. Results reveal that; separating vapor refrigerant has a positive impact on the approach of the evaporator with an open system distributor arrangement. The highest delta T and lowest practice are found at a heat flux of 13.97 kW/m² with an available system distributor compared to a closed system with a heat flux of 14.25 kW/m². The open system arrangement in the distributor is the novel parameter for distributor design, ensuring uniform distribution with minimum pressure drop and dry suction. An open system distributor has an average 16.1% capacity increase over a closed system. The experimental analysis helps to understand different parameters for the design of distributors in falling film evaporators for uniform distribution.     

Male reproductive toxicity of organophosphorous compounds: a review

Fertility is declining in many countries and there has been substantial interest in the potential adverse effects of exposure to environmental hazardous chemicals, including pesticides on male reproduction. Organophosphorous compounds (organophosphates, OP) constitute a heterogeneous category of chemicals specifically designed for the control of pests or plant diseases. OP are known to produce reproductive toxicity, resulting in a decrease in the fertility levels of humans and animals. This review article mainly focused on toxicity of some OP such as acephate, chlorpyrifos, diazinon, dimethoate, fenitrothion, malathion, and monocrotophos especially dealing with reproductive toxicity in males. Furthermore, this review deals with mode of action and clinical syndromes of OP. Considerable lab studies on animals concluded that OP produce adverse effects on male reproductive system.     

Removal of congo red and basic violet 1 by chir pine (Pinus roxburghii) sawdust,a saw mill waste: batch and column studies

The efficiency of chir pine sawdust (CPS) for adsorptive removal of the dyes, congo red (CR) and basic violet 1 (BV), from aqueous solution was evaluated using batch and column studies. The equilibrium was attained in 60 min for CR and 45 min for BV. The adsorption of BV obeyed the Langmuir isotherm model while the Freundlich isotherm fitted the equilibrium data of CR adsorption. The Langmuir monolayer adsorption capacities (Q_o) of CPS for BV and CR were 11.3 and 5.8 g kg^?1, respectively. The kinetic data for CR were best fitted to the Lagergren pseudo-first-order model and for BV to the pseudo-second-order model. The intra-particle diffusion was found to be the rate-controlling step for CR adsorption, while the adsorption kinetics of BV were controlled by both intra-particle and liquid-film diffusion. The thermodynamic parameters indicated that the adsorption process was spontaneous and endothermic in nature. The adsorption activation energy (E_a) for CR (124 kJ mol^?1) implied chemical adsorption while that for BV (5.4 kJ mol^?1) indicated physical adsorption. An increase in the Thomas model constant (K_Th) with increasing flow indicated that for both dyes the mass transport resistance decreased during adsorption. Thus, CPS may be an efficient low-cost adsorbent for decolorization of dye-containing wastewaters.     

Photodegradation of the organophosphorus herbicide “anilophos”

Photodecomposition of the organophosphorus herbicide anilophos [S‐(N‐(4‐chlorophenyl) N‐isopropyl carbaniloyl methyl] 0,0‐dimethyl phosphorodithioate has been studied in methanol. It underwent oxidation, hydrolysis and dimerisation on irradiation with U.V. light and produced a number of photoproducts which were characterised by ¹H‐NMR and Mass spectroscopy.